• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권3호
• /
• pp.186-190
• /
• 2017

A surgical approach involving the retromolar trigone, posterolateral maxilla, and pterygoid region is the most challenging in the field of maxillofacial surgery. The upper cheek flap (Weber-Ferguson incision) with subciliary extension and the maxillary swing approach have been considered as alternatives; however, neither approach provides sufficient exposure of the pterygoid region and the anterior portion of the mandibular ramus. In this report, we describe two cases in which a lower cheek flap approach was used for complete tumor resection in the retromolar trigone and the anterior mandibular ramus. This approach allows full exposure of the posterolateral maxilla and the pterygoid region as well as the retromolar trigone without causing major sensory disturbances to the lower lip. A mental nerve anastomosis after tumor resection was performed in one patient and resulted in approximately 90% sensory recovery in the lower lip. The lower cheek flap approach provides adequate exposure of the posterolateral maxilla, including the pterygoid, retromolar trigone, and mandibular ramus areas. If the mental nerve can be anastomosed during flap approximation, postoperative sensory disturbances to the lower lip can be minimized.

• 대한치과보철학회지
• /
• 제55권2호
• /
• pp.198-204
• /
• 2017

악안면부의 결손은 선천적으로 결손을 가지고 있거나 외상이나 수술적인 절제 등에 의한 후천적 원인에 의해 발생할 수 있다. 특히 구강 내 결손을 가진 환자 중 상악의 결손과 연관되어 있는 경우가 높은 비중을 차지하고 있으며 보철적 치료의 필요성이 높다. 하악의 부분적 결손을 가질 경우 기능적 회복에 상당한 한계점을 보이나 양측 턱관절이 정상적으로 남아 있을 경우 국소의치를 이용한 악안면 보철물을 제작함으로써 양호한 결과를 기대할 수 있다. 본 증례의 환자는 58세 남자 환자로서 안면부 총상으로 인한 구개부 및 좌측 하악 구치부 결손을 가진 분으로 obturator와 하악 RPD 재제작을 위해 내원하였다. 환자의 상악 결손 범위는 Aramany 분류법 Class IV에 해당되는 상태이며, 하악은 Cantor와 Curtis 분류법 Type V resection 상태이다. 상, 하악의 우측 구치부가 잔존하였으나, 수술 후 악골 변형으로 인해 서로 교합되지 않았으며 치주상태 불량으로 인한 동요도도 존재하는 상태였다. Obturator의 유지를 위해 잔존 지대치를 최대한 활용하였고 안정적인 교합이 형성되도록 치아를 배열하였다. 하악 RPD는 하악 절제술로 변형된 연조직에 적합하도록 제한된 범위를 피개하는 RPD를 제작하였다. 이에 환자분의 저작, 연하, 발음 기능이 많이 개선되었으며 만족할 만한 결과를 보여주어 본 증례를 발표하는 바이다.

• 대한치과보철학회지
• /
• 제54권3호
• /
• pp.280-285
• /
• 2016

하악골의 결손은 선천적 기형, 외상, 골수염, 종양 절제술 등에 의하여 초래될 수 있는데, 이중 결손부위가 큰 경우는 주로 종양절제술에 의한 결손이다. 악골 결손 부위가 커질수록 저작, 연하, 교합, 발음 등에 큰 지장을 초래하게 되며 심미적으로도 불량하여 일상생활에 많은 불편을 주게 된다. 하악골이 절제된 후 그 자리에 완전히 재생되는 경우는 희박하며 인공적으로 재건해 주어야 한다 일반적으로 자가골 이식을 이용한 재건술을 시행하며, 통상적인 부분의치 혹은 총의치를 시행하거나, 지지할 수 있는 골을 얻은 상태에서 임플란트 고정성 보철, 임플란트 보조 국소의치 혹은 피개의치 등을 시행할 수 있다. 본 증례는 2004년 2월 25일, 편평세포암종 pT1N0M0, stage I로 진단 받고 구강악안면외과에서 동년 3월, 하악 좌측 부위 COMMANDO 수술(combined mandibulectomy and neck dissection operation), 광범위 절제술(wide excision), 하악골 변연절제술(marginal mandibulectomy), 견갑 설골 상부 경부청소술(supraomohyoid neck dissection, SOHND), 시행받은 환자를 하악 좌측 중절치, 하악 좌측 제3대구치 부위에 임플란트 식립하여 임플란트 보조 국소의치로 수복하였고 충분한 피개와 임플란트로의 적절한 교합력 분산을 통해 통상적인 국소의치보다 더 이로운 지지, 유지, 안정을 얻을 수 있었다. 현재까지 경과 관찰 기간은 4년 정도 되었으며, 하악 좌측 제3대구치 부위에는 주위골의 흡수양상이 관찰되어 주기적인 검진이 필요한 상황이다.

• Journal of International Society for Simulation Surgery
• /
• 제3권2호
• /
• pp.60-63
• /
• 2016

Fibrous dysplasia is quite a rare disease usually involving maxilla and mandible. Because of its benign clinical course, conservative contouring surgery has been recommended for facial deformity. 3D rapid prototype (RP) model gives a lot of informations before operation such as depth of drilling, area of resection and important anatomic structure. The purpose of this study was to report maxilla-mandibular contouring surgery in fibrous dysplasia patients. A total of 14 consecutive patients were included for surgical and esthetic evaluation. Among 14 patients, RP model study was performed in two patients with severe facial deformity. The other patients underwent contouring surgery under conventional methods. Surgical evaluation was performed with computed tomography scan before and after operation. Surgical resection was successful and patients were satisfied with the surgical results.

• 대한두개안면성형외과학회지
• /
• 제18권3호
• /
• pp.149-154
• /
• 2017

Computer-aided surgery (CAS) started being used for head and neck reconstruction in the late 2000s. Its use represented a paradigm shift, changing the concept of head and neck reconstruction as well as mandible reconstruction. Reconstruction using CAS proceeds through 4 phases: planning, modeling, surgery, and evaluation. Thus, it can overcome a number of trial-and-error issues which may occur in the operative field and reduce surgical time. However, if it is used for oncologic surgery, it is difficult to evaluate tumor margins during tumor surgery, thereby restricting pre-surgical planning. Therefore, it is dangerous to predetermine the resection margins during the presurgical phase and the variability of the resection margins must be taken into consideration. However, it allows for the preparation of a prebending plate and planning of an osteotomy site before an operation, which are of great help. If the current problems are resolved, its applications can be greatly extended.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권6호
• /
• pp.474-480
• /
• 2009

These is a cases of chronic suppurative osteomyelitis occurred in the mandibular body to condyle of 48-year-old male patient. Extensive bone destruction was noted on the right mandibular body, angle, ascending ramus, mandibular notch and condylar region. We made a treatment plan that radicular mandibular resection from body to condyle and mandibular reconstruction with vascularized fibular flap at first time. But, we could observe marked bone regeneration with only mild curettage, local wound care and massive antibiotic therapy. So we preserved the anterior ramus portion of mandible. Defected mandibular condyle was reconstructed with costochondral graft. In this paper we present the case of a patient who has chronic osteomyelitis in mandibular area.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제39권
• /
• pp.16.1-16.6
• /
• 2017

Background: Mandibular reconstruction is performed after segmental mandibulectomy, and precise repositioning of the condylar head in the temporomandibular fossa is essential for maintaining preoperative occlusion. Methods: In cases without involvement of soft tissue around the mandibular bone, the autopolymer resin in a soft state is pressed against the lower border of the mandible and buccal and lingual sides of the 3D model on the excised side. After hardening, it is shaved with a carbide bar to make the proximal and distal parts parallel to the resected surface in order to determine the direction of mandibular resection. On the other hand, in cases that require resection of soft tissue around the mandible such as cases of a malignant tumor, right and left mandibular rami of the 3D model are connected with the autopolymer resin to keep the preoperative position between proximal and distal segments before surgical simulation. The device is made to fit the lower border of the anterior mandible and the posterior border of the mandibular ramus. The device has a U-shaped handle so that adaptation of the device will not interfere with the soft tissue to be removed and has holes to be fixed on the mandible with screws. Results: We successfully performed the planned accurate segmental mandibulectomy and the precise repositioning of the condylar head by the device. Conclusions: The present technique and device that we developed proved to be simple and useful for restoring the preoperative condylar head positioning in the temporomandibular fossa and the precise resection of the mandible.

• 대한치과의사협회지
• /
• 제25권5호통권216호
• /
• pp.465-477
• /
• 1987

This is an experimental and clinical study on the use of an autogenous frozen mandibular bone. Two aspects must be considered in the treatment of mandibular tumors: the eradication of the disease, and the maintenamce of the mandibular continuity for a good functional and esthetic results. The authors used the cryosurgical method in the dogs and the tumor of the mandible in human, which consists of partial mandibular resection; immersion of the bone in the liquid nitrogen at -196℃, followed by reimplantation of the mandibular bone in its bed. In experimental study, the mandibular segment showed favorable healing process without rejection during the cohole experimental periods. In clinical study, the frozen bone showed no antigenicity and excellent cosmetic results.

• The Journal of Advanced Prosthodontics
• /
• 제3권3호
• /
• pp.172-176
• /
• 2011

Surgical resection of the mandible due to presence of benign or malignant tumor is the most common cause of the mandibular deviation. Depending upon the location and extent of the tumor in the mandible, various surgical treatment modalities like marginal, segmental, hemi, subtotal, or total mandibulectomy can be performed. The clinicians must wait for extensive period of time for completion of healing and acceptance of the osseous graft before considering the definitive prosthesis. During this initial healing period prosthodontic intervention is required for preventing the mandibular deviation. This case report describes early prosthodontic management of a patient who has undergone a reconstructed hemi-mandibulectomy with modified mandibular guide flange prosthesis. The prosthesis helps patient moving the mandible normally without deviation during functions like speech and mastication.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권6호
• /
• pp.450-454
• /
• 2003

Mandibular arteriovenous malformations(AVM) are relatively rare and potentially life threatening lesions. Surgical treatment consists of wide resection of the mandible, which is difficult and potentially hazardous due to significant blood loss during surgery. Therefore, some authors advocate that transvenous embolization may be a safer and more effective method in the treatment of mandibular AVM. We report a treatment case of mandibular AVM in a 9-year-old-girl for episodes of spontaneous bleeding for 6 days using by selective transarterial embolization, direct puncture embolization and microcoil embolization.