• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.219-243
• /
• 1989

The purpose of this study was to evaluate the effects of the chincap therapy on the craniofacial structure in persons with skeletal Class III malocclusion. The patients selected for this study were treated with extra-oral chincap therapy only. Both control and treatment samples were obtained from Seoul National University Hospital where these longitudinal data were gathered. 55 treated patients and 14 control patients were studied. The mean ages at the 1st evaluation was 8 years 3 months in the treatment sample and 9 years 4 months in the control sample. The duration of chincap therapy was variable but averaged 2 years of treatment. Post-treatment observation procedeeded for 1 year 2 months. Active treatment and post treatment effects were evaluated. The results were as follows: 1. Neither significant restraint nor acceleration of growth was found in the cranial base and maxilla during treatment. 2. A distal rotation of the mandibular complex was seen. 3. Some amount of restraint of growth was found in mandibular body length, ramus height, mandibular length during treatment. 4. The genial angle was reduced. 5. After removal of the chin-cap, forward displacement of the mandible took place.

• Archives of Plastic Surgery
• /
• v.39 no.4
• /
• pp.284-290
• /
• 2012

Open reduction and anatomic reduction can create better function for the temporomandibular joint, compared with closed treatment in mandible fracture surgery. Therefore, the double miniplate fixation technique via mini-retromandibular incision was used in order to make the most stable fixation when performing subcondylar fracture surgery. Those approaches provide good visualization of the subcondyle from the posterior edge of the ramus, allow the surgeon to work perpendicularly to the fracture, and enable direct fracture management. Understanding the biomechanical load in the fixation of subcondylar fractures is also necessary in order to optimize fixation methods. Therefore, we measured the biomechanical loads of four different plate fixation techniques in the experimental model regarding mandibular subcondylar fractures. It was found that the loads measured in the two-plate fixation group with one dynamic compression plate (DCP) and one adaption plate showed the highest deformation and failure loads among the four fixation groups. The loads measured in the one DCP plate fixation group showed higher deformation and failure loads than the loads measured in the two adaption plate fixation group. Therefore, we conclude that the selection of the high profile plate (DCP) is also important in order to create a stable load in the subcondylar fracture.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.3
• /
• pp.214-216
• /
• 2010

An osteochondroma is an osseous protuberance with cartilaginous growth potential, usually arising in skeletal bone and relatively uncommon in the craniofacial bone. Osteochondroma of the craniofacial region usually occurs at the condyle or the tip of the coronoid process, and rarely arises in the mandibular body, symphysis, ramus, and similar areas. Excision of the lesion including the periosteum is curative, and recurrence or malignant change (usually to a chondrosarcoma) after treatment is rare. We present an atypical case of osteochondroma in the left mandibular inferior border with review of literature.

• Journal of Yeungnam Medical Science
• /
• v.38 no.1
• /
• pp.47-52
• /
• 2021

Background: Short stature is defined as a height below the 3rd percentile or more than two standard deviations below the mean for a given age, sex, and population. There have been inconsistent results regarding craniofacial morphology in short-statured children. This study aimed to analyze the differences between short-statured children with growth hormone deficiency, idiopathic short-statured children, and normal children. Methods: Thirty-one short-statured children with growth hormone deficiency, 32 idiopathic short-statured children, and 32 healthy children were enrolled in this study. The measurements of their craniofacial structures from lateral cephalograms were evaluated. Results: There were statistically significant differences among the three groups seven variables (anterior cranial base length, posterior cranial base length, total cranial base length, upper posterior facial height, posterior total facial height, mandibular ramus length, and overall mandibular length) in the linear measurement and five variables (saddle angle, gonial angle, mandibular plane angle, position of mandible, and maxilla versus mandible) in the angular measurement. Conclusion: Compared to the control group, many linear and angular measurements of the craniofacial structures were significantly different in the two short-statured groups (p <0.05). Treatment plans by orthodontists should include these craniofacial structure characteristics.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.4
• /
• pp.169-172
• /
• 2014

Objectives: The purpose of this retrospective study was to compare the amount of postoperative drainage via closed suction drainage system after intraoral vertical ramus osteotomy (IVRO) and sagittal split ramus osteotomy (SSRO). Materials and Methods: We planned a retrospective cohort study of 40 patients selected from a larger group who underwent orthognathic surgery from 2007 to 2013. Mean age (range) was 23.95 (16 to 35) years. Patients who underwent bilateral IVRO or SSRO were categorized into group I or group II, respectively, and each group consisted of 20 patients. Closed suction drainage system was inserted in mandibular osteotomy sites to decrease swelling and dead space, and records of drainage amount were collected. The data were compared and analyzed with independent t-test. Results: The closed suction drainage system was removed at 32 hours postoperatively, and the amount of drainage was recorded every 8 hours. In group I, the mean amount of drainage was 79.42 mL in total, with 31.20 mL, 19.90 mL, 13.90 mL, 9.47 mL, and 4.95 mL measured at 0, 8, 16, 24, and 32 hours postoperatively, respectively. In group II, the mean total amount of drainage was 90.11 mL, with 30.25 mL, 25.75 mL, 19.70 mL, 8.50 mL, and 5.91 mL measured at 0, 8, 16, 24, and 32 hours postoperatively, respectively. Total amount of drainage from group I was less than group II, but there was no statistically significant difference between the two groups (P=0.338). There was a significant difference in drainage between group I and group II only at 16 hours postoperatively (P=0.029). Conclusion: IVRO and SSRO have different osteotomy design and different extent of medullary exposure; however, our results reveal that there is no remarkable difference in postoperative drainage of blood and exudate.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.2
• /
• pp.130-134
• /
• 1997

The sagittal split ramus osteotomy(SSRO) of the mandible has used one of the most popula methods for the correction of various dentofacial deformities, especially mandibular prognathism. In SSRO, there are produced bony gap following mandible setback because of mandibular flaring. For this reason, the condylar axis may be changed due to bony approximation both segment in three dimension more mesio-laterally. According to change of condylar position, the condition of TMJ structure are changed and change of TMJ symptoms are suggested theoretically, and the correction of malocclusion by SSRO may improve the TMJ symptoms by improvement of feeding difficulties. The pupose of this study was to determine relationship between expected alterations in condylar position and suggested TMJ symptoms produced by change of condylar position. TMJ symptoms of 15patients who had operated SSRO are checked at about postoperative 6 month ranging $5{\sim}11$ month. Anterior-posterior position of condyle which was comparison preoperative with postoperative position, was classified 5 groups. The author tried to identify relationship between positional change of condyle and TMJ discomfort.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.5
• /
• pp.329-334
• /
• 2009

Objective: To evaluate the ratio between bone-contact length and inter-segmental length of the rigid fixation screw used in bilateral sagittal split ramus osteotomy (BSSRO) for mandibular setback. Material and Methods: Records of 40 patients with Class III malocclusion were selected. 20 of them had BSSRO, while the other 20 had BSSRO with maxillary LeFort I osteotomy. All of the patients had three noncompressive bicortical screws inserted at the gonial angle through transcutaneous approach. Two screws were inserted antero-posteriorly above inferior alveolar nerve and one screw was inserted below. The lengths of bone-contact and that of inter-segmental part were measured using cone-beam computed tomography. Ratio between these two measured lengths was calculated. Results: Both bone-contact and inter-segmental lengths were longer in BSSRO group than in BSSRO with maxillary LeFort I osteotomy group. Ratio of bone-contact to inter-segmental length was lower in BSSRO group than in BSSRO with Lefort I group. Both bone-contact and inter-segmental lengths were longer at the antero-superior position than at the inferior position. However, their ratio showed little difference. Conclusion: This study suggest that stability of screws in BSSRO group was greater than in BSSRO with Lefort I group. Stability of screws at the antero-superior position was greater than at the inferior position. Ratio of bone-contact to inter-segmental lengths was 0.2 in average.

• The Journal of the Korean dental association
• /
• v.52 no.10
• /
• pp.623-632
• /
• 2014

The facial asymmetries include maxillary, mandibular, and chin asymmetries, although the most common deformity is primarily in the mandible. Common causes of this type of asymmetry can include asymmetric growth of the condyle or the mandible. In these patients, the location of the Me would be deviated to the shorter side because of the asymmetric growth of the mandible, and, commonly, the maxillary occlusal plane would be tilted toward the deviated side because the maxilla likely grows asymmetrically according to the pattern of asymmetric mandibular growth. Three-dimensional CT images are ideal for evaluating the size and location of anatomic structures, and such reconstructed images allow the use of software that can show anatomic structures from numerous angles, allowing actual measurements of distances and angles without problems of magnification, distortion, or superimposition caused by 2-dimensional imaging. In the present study using 3D-CT imaging, the 8 parameters, including measurements of the upper midline deviation, maxillary canting in the canine and first molar regions, width of the upper arch, width of the mandible at the Go, vertical length of the ramus, inclination of the ramus, and deviation of the Me were easily measured. The dentition should be orthodontically decompensated and dental midline should ensure incisor midlines positioned in the midline of each jaw before surgical correction. Surgical correction could be considered such as canting or yawing correction in the frontal or horizontal aspect, respectively.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.34-40
• /
• 2012

Purpose: The study was performed to compare patients with anatomical variations in facial asymmetry with patients in the normal range using cone-beam computed tomography (CBCT) and to take the preoperative condition into consideration in the case of a sagittal split ramus osteotomy (SSRO). Methods: The study was conducted on 46 adult patients composed of 2 subdivided groups, an asymmetry group (n=26) and a symmetry group (n=20). The asymmetry group was divided between patients with hemimandibular hyperplasia (HH, n=8) and hemimandibular elongation (HE, n=18). Using cross-sectional computed tomography images, the thickness of cancelleous bone in the buccal area of the mandible, thickness of buccal cortex in the buccal aspect of the mandible, thickness of cancellous bone in the inferior aspect of the mandible, thickness of buccal cortex in the inferior aspect of the mandible, and cross-sectional surface area of the mandible were measured. Results: In the asymmetry group, the cross-sectional area of the mandible including the inferior alveolar nerve positioned on the affected side was significantly different from the symmetry group. Thickness of cancelleous bone in the buccal aspect of the mandible, thickness of cancelleous bone in the inferior aspect of the mandible, and cross-sectional surface area of the mandible in the affected site of hemimandibular hyperplasia was significantly smaller than in the symmetry group. Conclusion: The inferior alveolar nerve runs lower and in a more buccal direction and shows a smaller cross-sectional surface of the mandible in the hemimandibular hyperplasia patients with asymmetry.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.1
• /
• pp.55-59
• /
• 2005

Purpose : This study is to predict the changes of the distal segment by investing the resorption of the excessive distal segment regarding the amount of setback after BSSRO. Material and Methods : 20 patients with Mandible prognathism treated by Obwegeser-Dal Pont method during the years 2000 to 2002 were selected for this study. Group A consisted of 5 males & 5 females with a setback amount of 10mm and above(Mean $10.80mm{\pm}1.03$, n=20) and Group B consisted of 2 males & 8 females with a setback amount of below 10mm.(Mean $6.10mm{\pm}1.10$, n=20) Panorama X-ray was taken at day 1, 1month, 3months, 6months, and 12months after the surgery. Resorption areas of excessive distal segment were measured on these panorama X-rays and compared. Results : There was bone resorption in both groups. Group A showed more bone resorption than Group B. Group B showed slightly higher resorption rate than Group A. However, there was no statistically significant difference between the resorption rates of Group A and Group B. (P>0.05). Conclusion : More bone resorption occurred with a larger amount of setback and about one third of the excessive distal segment underwent resorption, irrespective of the amount of setback.