• 대한치과보철학회지
• /
• 제62권2호
• /
• pp.174-182
• /
• 2024

다수의 구치를 상실한 환자에서는 전방부 치아들의 마모나 변위, 교합평면의 붕괴와 교합수직고경의 감소가 일어날 수 있다. 특히 편측으로 소수의 치아만 가진 경우 국소의치는 생역학적으로 불리하므로, 소수의 임플란트 서베이드 크라운을 추가한 임플란트 보조 국소의치가 대안이 될 수 있다. 본 증례의 환자는 하악 우측 구치부 상실로 인해 전방부 치아들이 심하게 마모되고, 교합평면이 붕괴되어 있었다. 최소한의 교합 수직고경 거상과 함께 상악 고정성 보철 및 하악 임플란트 보조 국소의치로 수복을 진행하였고, 기능적 및 심미적으로 양호한 임상 결과를 얻을 수 있었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권4호
• /
• pp.319-324
• /
• 2009

Kole's Anterior segmental osteotomy of the mandible is commonly used to close an anterior open bite, to depress an elevated anterior dentoalveolar segment, or to retrude or advance a dentoalveolar segment. The procedure is often combined with an anterior maxillary segmental osteotomy to correct bimaxillary protrusion. We report 53-year-old woman who the extruded state of mandibular anterior alveolar segment was corrected using an mandibular anterior alveolar segmental osteotomy and dental implantation of the anterior maxilla. We planned to remove the old prosthesis, and then perform an anterior mandibular segmental osteotomy and implant restoration of the anterior maxilla. We suggest that anterior segmental osteotomy is very useful for rehabilitating edentulous patients with malaligned alveolar segment.

• The Journal of Advanced Prosthodontics
• /
• 제12권3호
• /
• pp.167-172
• /
• 2020

PURPOSE. The aim of the present study was to investigate the passive fit of metal substructure after repetitive firing processes in implant-supposed prosthesis. MATERIALS AND METHODS. Five implants (4 mm diameter and 10 mm length) were placed into the resin-based mandibular model and 1-piece of screw-retained metal substructure was produced with the direct metal laser sintering (DMSL) method using Co-Cr compound (n = 10). The distance between the marked points on the multiunit supports and the marginal end of the substructure was measured using a scanning electron microscope (SEM) at each stage (metal, opaque, dentin, and glaze). 15 measurements were taken from each prosthesis, and 150 measurements from 10 samples were obtained. In total, 600 measurements were carried out at 4 stages. One-way ANOVA test was used for statistical evaluation of the data. RESULTS. When the obtained marginal range values were examined, differences between groups were found to be statistically significant (P<.001). The lowest values were found in the metal stage (172.4 ± 76.5 ㎛) and the highest values (238.03 ± 118.92 ㎛) were determined after glaze application. When the interval values for groups are compared with pairs, the differences between metal with dentin, metal with glaze, opaque with dentin, opaque with glaze, and dentin with glaze were found to be significant (P<.05), whereas the difference between opaque with metal was found to be insignificant (P=.992). CONCLUSION. Passive fit of 1-piece designed implant-retained fixed prosthesis that is supported by multiple implants is negatively affected by repetitive firing processes.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.207-216
• /
• 2006

Statement of Problem: To conduct a successful function of implant prosthesis in oral cavity for a long time, it is important that not only structure materials must have the biocompatibility, but also the prosthesis must be designed for the stress, which is occurred in occlusion, to scatter adequately within the limitation of alveolar bone around implant and bio-capacity of load support. Now implant which is used in clinical part has a very various shapes, recently the fixture that has tapered form of internal connection is often selected. However the stress analysis of fixtures still requires more studies. Purpose: The purpose of this study is to stress analysis of the implant prosthesis according to the different implant systems using finite element method. Material and methods: This study we make the finite element models that three type implant fixture ; $Br{\aa}nemark$, Camlog, Frialit-2 were placed in the area of mandibular first premolar and prosthesis fabricated, which we compared with stress distribution using the finite element analysis under two loading condition. Conclusion: The conclusions were as follows: 1. In all implant system, oblique loading of maximum Von mises stress of implant, alveolar bone and crown is higher than vertical loading of those. 2. Regardless of loading conditions and the type of system. cortical bone which contacts with implant fixture top area has high stress, and cancellous bone has a little stress. 3. Under the vertical loading, maximum Von mises stress of $Br{\aa}nemark$ system with external connection type and tapered form is lower than Camlog and Frialit-2 system with internal connection type and tapered form, but under oblique loading Camlog and Frialit-2 system is lower than $Br{\aa}nemark$ system.

• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.632-649
• /
• 1996

The purpose of this study was to examine, by the method of 3-dimentional finite element analysis. how infraocclusion affected the stress distribution in surrounding bone and osseointegrated prosthesis. The 3-dimentional finite element mandibular models were made, in which the first and second molars were removed and the two osseointegrated implants were placed in the first and second molar sites and implant supported fixed prostheses were constructed. Analysis of equivalent stress and displacement induced by strong occlusion or infraocclusion was performed under vertical or inclined distributed loads. The results were as follows; 1. Under vertical load of 50N or 500N, the model in which infraocclusion had not been allowed showed greater stress on implants and the supporting bone than on natural teeth. 2. In the model in which infraocclusion of $30{\mu}m$ had been allowed, implant-prosthesis on the molars had no contact with opposing teeth under vertical load of 50N, However with the same allowed infraocclusion and the model under vertical load of 500N, implant prosthesis on the second molar had contact with opposing teeth, and stress distribution occured properly on natural teeth and implants. 3. Under $45^{\circ}$ inclined load, the model in which infraocclusion had not been allowed showed greater stress on implants and the supporting bone than on natural teeth. There was greater stress in the case of $45^{\circ}$ inclined load than in the case of vertical load. 4. Under $45^{\circ}$ inclined load of 50N or 500N, the model in which infraocclusion of $30{\mu}m$, had been allowed showed no occlusal contact on the implants and occlusal contact on the natural teeth. 5. In partially edentulous cases with implant supported prosthesis, we can prevent excessive load on implants by allowing infraocclusion.

• 대한치과기공학회지
• /
• 제38권3호
• /
• pp.203-208
• /
• 2016

Purpose: This study introduces the production process of dog's dental prosthesis using an automated dental prosthetics technology. The occlusal interaction of dog's dental prosthesis was observed. Methods: This study was proceeded with dog's the mandibular first molar teeth. The 3D CAD designed to 3D model specimens was observed by CAD software. and The specimens designed to 3D model specimens was observed occlusal interaction by using articulator. Results: Occlusal contact point in prosthetic specimens were observed in buccal surface. and 98% of the size of the crown is the best occlusal relationship. Conclusion: Observation of occlusal relations result to 98% of the size of the crown is the best.

• 대한치과의사협회지
• /
• 제56권5호
• /
• pp.263-276
• /
• 2018

Long-term survival and prognosis of narrow-diameter implants have been reported to be adequate to consider them a safe method for treating a deficient alveolar ridge. The objective of this study was to perform case report of narrow-diameter implants with a trapezoid-shape in anterior teeth alveolar bone. A 50-year-old male patient presented with discomfort due to mobility of all of the maxillary teeth and mandibular incisors. Due to destruction of alveolar bone, four anterior mandibular teeth were extracted. Soft tissue healing was allowed for approximately 3 months after the extraction, and a new design of implant placement was planned for the mandibular incisor area, followed by clinical and radiological evaluation. Implant placement was determined using an R2GATE surgical stent. The stability of the implants was assessed by ISQ measurements at the first and second implant surgery and after prosthetic placement. At 1 and 3 months and 1 year after implantation of the prosthesis, clinical and radiological examinations were performed. Another 50-year-old male patient presented with discomfort due to mobility of the mandibular central incisors. For the same reason as in the first patient, implant placement was carried out in the same way after extraction. ISQ measurements and clinical and radiological examinations were performed as in the previous case. In these two clinical cases, 12 months of follow-up revealed that the implant remained stable without inflammation or additional bone loss, and there was no discomfort to the patient. In conclusion, computer-guided implant surgery was used to place an implant in an optimal position considering the upper prosthesis. A new design of a narrow-diameter implant with a trapezoid-shape into anterior mandibular alveolar bone is a less invasive treatment method and is based on the contour of the deficient alveolar ridge. Through all of these procedures, we were able to reduce the number of traumas during surgery, reduce the operation time and total treatment period, and provide patients with more comfortable treatment.

• 대한치과보철학회지
• /
• 제51권3호
• /
• pp.214-220
• /
• 2013

무치악 환자의 임플란트 보철 치료는 지지, 유지, 안정성, 발음 등의 측면에서 더 우수한 결과를 보인다. 임플란트를 이용한 무치악 환자의 치료는 다양하며, 크게 가철성과 고정성으로 나눌 수 있다. 가철성 치료에는 임플란트 유지 및 지지 피개의치가 있으며, 고정성 보철치료에는 ceramo-metal 보철물과 임플란트 하이브리드 보철물(implant hybrid prosthesis)이있다. 치료계획의 수립은 잔존 치조제, 연조직, 악간 관계, 환자의 경제적 상황 등을 종합적으로 고려하여 수립해야 한다. 임플란트를 이용한 하이브리드 보철물은 고정성 치료를 통해 환자에게 적절한 교합력을 제공하고 심리적인 안정감을 주는 동시에 적절한 연조직의 회복을 통한 심미적인 결과를 얻을 수 있다. 본 증례는 73세 여환으로 상악 Kennedy Class I 부분 무치악과 하악 무치악 상태로 내원하였다. 상악에는 우측 견치부터 좌측 제1소구치까지 7개의 잔존치를 이용한 가철성 국소의치, 하악은 양측 측절치와 제1소구치 부위에 4개의 임플란트 고정체를 이용한 하이브리드 보철물로 최종 치료 진행하였으며 치료 후 기능적, 심미적으로 만족스러운 결과를 얻었기에 이를 보고하고자 한다.

• 대한치과보철학회지
• /
• 제58권3호
• /
• pp.228-238
• /
• 2020

환자의 교합에 맞춰 적절한 고정성 보철물을 성공적으로 제작 및 수복하기 위해서 필요한 다양한 고려사항이 있다. 그 중 환자가 갖고 있는 교합의 형태를 파악하여 고정성 보철물에 부여하는 것은 필수적이라 할 수 있다. 견치 유도 교합, 군 기능 교합 등 여러가지 교합 형태를 파악하는데 있어서 하악의 운동을 기록하는 것이 중요한데, 1933년 Meyers에 의해 소개된 Functionally generated path (FGP) technique은 구내에서 왁스 등의 재료를 이용하여 교두가 지나가는 하악 운동로를 기록한 후 보철물 제작에 적용하는 치료 술식이다. 본 증례에서는 두 명의 환자에 있어서 상악 구치부에 이차 우식 혹은 치주염으로부터 기원한 치수 유래 병소가 있어, 근관 치료 및 치주 치료 완료 후 고정성 보철물 수복이 필요하였다. 장기적인 예후가 좋지 않은 치아이기에 측방 간섭을 최소화하기 위해 FGP technique을 이용하여 하악 운동을 기록하였다. 통상적인 석고 인상 방법이 아닌 구내 디지털 스캔을 시행함으로써 더 효율적으로 보철물을 제작하였다. 치료 후 환자와 술자 모두 기능적으로 만족할 만한 결과를 얻었기에 이를 보고하는 바이다.

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.448-455
• /
• 2019

법랑모세포종은 치성 상피성 양성 종양으로 재발률이 높아 주변 조직의 광범위한 절제 및 결손부의 재건을 필요로 한다. 술 후 치아 결손 부위의 보철치료 시에 재건 부위의 해부학적 한계로 인해 임플란트 식립을 동반한 보철 치료가 추천된다. 본 증례에서는 법랑모세포종으로 인해 하악골 분절 절제술 및 장골을 이용한 하악골 재건술을 시행한 환자에서 재건 부위 상실치를 임플란트 고정성 보철물로 수복하였고 임플란트 보철물을 장착 완료 한 14개월 뒤 원인 미상의 인접치 정출로 인해 임플란트를 포함한 전방부 치아에서 1 mm 가량의 개방 교합이 발생하였다. 성인에서 상악 전치부 임플란트 식립 후 잔존 성장으로 인해 임플란트 저위 교합이 발생하는 경우는 보고된 바 있으나 본 증례는 구치부에서 인접한 자연치의 정출로 인해 임플란트 보철물을 포함한 전방 치열의 개방 교합이 발생한 것으로 그 유사 보고가 흔하지 않다. 이에 정출된 치아를 압하 하는 교정 치료를 동반한 전체 치료 과정을 보고하고 원인 미상의 자연치 정출이 발생한 원인에 대해 고찰해보고자 한다.