• The korean journal of orthodontics
• /
• v.45 no.6
• /
• pp.275-281
• /
• 2015

Objective: To assess the accuracy of anterior tooth movement using clear aligners in integrated three-dimensional digital models. Methods: Cone-beam computed tomography was performed before and after treatment with clear aligners in 32 patients. Plaster casts were laser-scanned for virtual setup and aligner fabrication. Differences in predicted and achieved root and crown positions of anterior teeth were compared on superimposed maxillofacial digital images and virtual models and analyzed by Student's t-test. Results: The mean discrepancies in maxillary and mandibular crown positions were $0.376{\pm}0.041mm$ and $0.398{\pm}0.037mm$, respectively. Maxillary and mandibular root positions differed by $2.062{\pm}0.128mm$ and $1.941{\pm}0.154mm$, respectively. Conclusions: Crowns but not roots of anterior teeth can be moved to designated positions using clear aligners, because these appliances cause tooth movement by tilting motion.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.5
• /
• pp.242-245
• /
• 2013

Impacted mandibular third molars are located between the second mandibular molar and mandibular ramus. However, ectopic mandibular third molars with heterotopic positions are reported in the subcondylar or pterygomandibular space. The usual cause of malposition is a cyst or tumor, and malposition without a pathology is rare. This case report described an impacted mandibular third molar in the pterygomandibular space without any associated pathology.

• Journal of Oral Medicine and Pain
• /
• v.21 no.1
• /
• pp.55-65
• /
• 1996

This study was performed to investigate the effects of head posture and occlusal splint on the vertical dimension in mandibular rest position and swallowing. Thirty health dental students ware selected lot this study and BioEGNⓡ(Bioresearch Inc., USA) was used for measuring interocclusal distance during rest - swallowing - rest - tapping movement. This swallowing movements were observed in both normal head posture(NHP) and forward head posture (FHP). Thickness of occlusal splint was about 2mm at posterior molar area and even tooth contact were achieved on light biting. The four mandibular positions at which interocclusal distance measured were swallowing position, after swallowing position in which interocclusal distance was maximum, rest position follows swallowing, and tapping position after rest. Changes of distance in each position were measured for three mandibular planes, that is, sagittal, frontal, and horizontal plane, respectively. The results obtained were as follows : 1. In normal head posture, the mandible was raised 1.03mm without splint, and 0.77mm with splint on swallowing, and there was no significant difference between the two. In horizontal plane, however, mandible was displaced more anteriorly in both swallowing position and tapping position with splint. 2. In forward head posture, the mandible was less raised with splint on swallowing, but features in horizontal plane were almost same as those in normal head posture. 3. In natural dentition, significant difference between NHP and FHP were observed in horizontal plane trajectory for swallowing and tapping position. But the difference for same positions were observed in frontal trajectory with splint. 4. Total amount of mandibular movement of two groups classified with sagittal interocclusal distance of swallowing position generally showed significant difference between the higher and the lower height group in head posture without splint. 5. Correlationship among total amount of mandibular movement for three mandibular planes were observed between sagittal plane and horizontal plane, and between sagittal plane and frontal plane in head posture without splint.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.159-169
• /
• 1995

The purpose of this study was investigating the effects of pivot splint on width of the temporomandibular joint space in order to get the basic data for clinical applications. Pivot splint could be used for treating the patients with temporomandibular disorders, especially for chronic closed lock which would not be reduced by joint manipulation or with other methods. So it is necessary to have a lot of underlying data for using pivot splint, but there is few available reports related to mechanical principle or clinical results of the splint. Healthy twenty dental students wee collected for this study and pivot splint with 2.5mm high right-side pivot was used. Next, transcanial projection was taken and width of joint space at there mandibular positions were measured : habitual occlusion position, clenching position with splint, and clenching position with splint and mandibular force. The data were processed with SAS statistical program. The obtained results were as follows : 1. Ipsilateral posterior joint space width was increased on clenching the pivot splint, but joint space widths of contralateral side were not significantly changed. 2. Superior and posterior joint space width were increased on clenching the pivot splint with mandibualr force on both ipsilateral and contralateral side. 3. Ipsilateral joint space widths were not significantly changed from habitual occlusion position to clenching the pivot splint with active mandibular force, but in case of with passive mandibular force, posterior joint space width was significantly increased. 4. Correlationships between mandibular positions were more significant at anterior joint space than at superior or posterior joint space. But the correlation between clenching and clenching with mandibular force was significant at all the three joint space.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.6
• /
• pp.278-284
• /
• 2014

Objectives: This study used cone-beam computed tomography (CBCT) images to categorize the relationships between the mandibular canal and the roots and investigated the prevalence of nerve damage. Materials and Methods: Through CBCT images, contact and three-dimensional positional relationships between the roots of the mandibular third molar and the mandibular canal were investigated. With this data, prevalence of nerve damage according to the presence of contact and three-dimensional positional relationships was studied. Other factors that affected the prevalence of nerve damage were also investigated. Results: When the mandibular third molar and the mandibular canal were shown to have direct contact in CBCT images, the prevalence of nerve damage was higher than in other cases. Also, in cases where the mandibular canal was horizontally lingual to the mandibular third molar and the mandibular canal was vertically at the cervical level of the mandibular third molar, the prevalence of nerve damage was higher than in opposite cases. The percentage of mandibular canal contact with the roots of the mandibular third molar was higher when the mandibular canal was horizontally lingual to the mandibular third molar. Finally, the prevalence of nerve damage was higher when the diameter of the mandibular canal lumen suddenly decreased at the contact area between the mandibular canal and the roots, as shown in CBCT images. Conclusion: The three-dimensional relationship of the mandibular third molar and the mandibular canal can help predict nerve damage and can guide patient expectations of the possibility and extent of nerve damage.

• The korean journal of orthodontics
• /
• v.35 no.1 s.108
• /
• pp.82-89
• /
• 2005

Mandibular widening is one method of mandibular distraction osteogenesis, which has anatomic limitations such as curved surface, mandibular condyle and narrow arch. The purpose of this study was to understand the biomechanics of various mandibular widening procedures Experimental models consisted of 6 groups according to different osteotomy hues and distractor positions. The results of this study showed different expansion patterns. which meant the feed for proper approaches in mandibular widening.

• Imaging Science in Dentistry
• /
• v.32 no.2
• /
• pp.67-73
• /
• 2002

Purpose: To examine the possible relationship between condylar position and disk displacement in the temporomandibular joint. Materials and Methods: 79 temporomandibular joints in 40 patients having temporomandibular disorders were classified into three categories: no disk displacement (NDD) , disk displacement with reduction (DDWR), and disk displacement without reduction (DDWOR). Disk positions were assessed from clinical and MRI findings. The relationship between the three categories and condylar positions was evaluated using lateral individualized corrected tomography. Results: Clinical findings regarding the relationship between condyle and disk positions having anterior, centric, and posterior positions were 27%, 27%, and 46%, respectively, in NDD, 43%, 17%, and 40%, respectively, in DDWR, and 44%, 22%, and 34%, respectively, in DDWOR. There were no significant differences in condylar positions between each of the groups (P>0.05). In the relationship between condyle and disk positions with MRI findings, anterior, centric, and posterior positions were 38%, 38%, and 24%, respectively, in NDD, 29%, 21%, and 50%, respectively, in DDWR, and 44%, 9%, and 47% respectively, in DDWOR. There were significant differences in the condylar positions when MRI was utilized (P<0.05) Conclusion: There was a significant correlation between the condyle and disk positions with MRI findings on lateral individualized corrected tomography.

• The Journal of the Korean dental association
• /
• v.53 no.6
• /
• pp.402-410
• /
• 2015

The aims of occlusal adjustment are as follows: to eliminate occlusal interference, to redirect force generated during function to which is favorable for teeth, to improve mastication efficiency and simultaneously establish stable maximal intercuspation or centric occlusion. Also, it should permit mandible to move freely from all positions. The sequence of occlusal adjustment in natural teeth and fixed prosthesis shall be as follows: 1) Eliminate interference that prevent optimal intercuspation and recontouring adjustment 2) Establish maximal intercuspation 3) Eliminate interference in lateral mandibular movement 4) Eliminate interference in anterior mandibular movement 5) Refine occlusal relationships.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.1
• /
• pp.149-160
• /
• 1992

The purpose of this study was to localize the inferior alveolar canals in relation to the root apices of the mandibular third molars, according to their positions and degrees of impaction using vertical tube shift technique. One hundred three mandibular third molars, from 95 persons consisted of 57 males and 38 females, were clinically and radiographically investigated. The mandibular third molars had no pericoronitis and periapical lesions, and showed an evidence of complete root formation. The obtained results were as follows: 1. In localiztion of the inferior alveolar canals in relation to the root apices of the mandibular third molars, the inferior alveolar canal was located at the buccal side of the root apices of mandibular third molar in 77.7%, below the root apices in 16.5%, and the lingual side of root apices in 5.8%. 2. The positions of the mandibular third molars according to the Winter's Classification were as follows; 36.9% in Class Ⅰ, 21.3% in Class Ⅱ, 14.7% in Class Ⅲ, 4.8% in Class Ⅳ, 1.9% in Class Ⅴ, 17.5% in Class Ⅵ, 2.9% in Class Ⅶ. In localization of the inferior alveolar canals in relation to the root apices of the mandibular third molars according to the Winter's Classification, 92.1 % of Class Ⅰ, 86.4% of Class Ⅱ, 80.0% of Class Ⅲ, and 100.0% of Class Ⅳ and Ⅴ were located at the buccal side. In Class Ⅵ, however, 33.3% was located at the buccal side, 44.5% below the root apices, and 22.2% at the lingual side. 3. The degree of impaction was revealed to be 53.4% in Degree Ⅰ, 36.9% in Degree Ⅱ, and 9.7% in Degree Ⅲ. In localization of the inferior alveolar canals in relation to the root apices of mandibular third molars according to degree of impaction, 98.2% of Degree Ⅰ was located at the buccal side. In Degree Ⅱ, 60.5% was located at the bucal side, 31.6% below the root apices, and 7.9% at the lingual side. In Degree Ⅲ, 30.0% was located at the buccal side, 40.0% below the root apices, and 30.0% at the lingual side.

• Imaging Science in Dentistry
• /
• v.44 no.1
• /
• pp.61-65
• /
• 2014

Purpose: This study was performed to evaluate the position of impacted mandibular third molars in different skeletal facial types among a group of Iranian patients. Materials and Methods: A total of 400 mandibular third molars in 200 subjects with different types of facial growth were radiographically investigated for their positions according to their types of facial growth on the basis of the ${\beta}$ angle. The subjects were divided into three groups (class I, II, and III) according to ANB angle, representing the anteroposterior relationship of the maxilla to the mandible. Meanwhile, the subjects were also divided into three groups (long, normal, and short face) according to the angle between the stella-nasion and mandibular plane (SNGoGn angle). ANOVA was used for statistical analysis. Results: The mean ${\beta}$ angle showed no significant difference among class I, II, and III malocclusions (df=2, F=0.669, p=0.513). The same results were also found in short, normal, and long faces (df=1.842, F=2, p=0.160). The mesioangular position was the most frequent one in almost all of the facial growth patterns. Distoangular and horizontal positions of impaction were not found in the subjects with class III and normal faces. In the long facial growth pattern, the frequency of vertical and distoangular positions were not different. Conclusion: In almost all of the skeletal facial types, the mesioangular impaction of the mandibular third molar was the most prevalent position, followed by the horizontal position. In addition, ${\beta}$ angle showed no significant difference in different types of facial growth.