• 대한소아치과학회지
• /
• 제45권3호
• /
• pp.386-392
• /
• 2018

터너 증후군이란 한 개의 X 염색체와 전부 혹은 부분이 결여된 X 염색체를 나타내는 염색체 이상 질환이다. 치근 형태 이상이 터너 증후군 환자에서 정상에서보다 호발한다고 보고되었는데, 치근의 이러한 특징은 근관치료를 까다롭게 만들고, 특수한 처치를 요하기도 한다. 또한 터너 증후군 환자들은 종종 심장 또는 신장의 기형과 같은 전신적인 문제를 동반하기도 하므로, 임상의는 터너 증후군의 특징적인 구내 소견을 인지하고, 사전에 구내 합병증을 예방하기 위해 환자들이 정기적으로 치과 검진을 받을 수 있게 해야 한다. 10세 때에 터너증후군 진단을 받은 12세 여자 환자가 하악 양측 소구치 부위의 불편감을 주소로 내원했다. 특징적으로 하악의 모든소구치에서 우상치와 치외치가 관찰되었다. 하악 양측 제1소구치는 세 개의 치근을, 근단부 병소를 보이는 하악 양측 제2소구치는 두 개의 치근을 가지고 있었다. 근관의 복잡한 해부학적 특징 때문에 치과 현미경을 이용한 적절한 시야를 확보하여 근관치료를 마무리 했다. 2년간의 정기적인 관찰 결과 해당치아와 관련된 임상적 징후나 증상, 치근단 병소는 관찰되지 않았다. 본 증례 보고를 통해 터너 증후군 환자의 구강내 특징과 이의 치과적 관리에 대해 보고하고자 하였다.

• 대한치과교정학회지
• /
• 제7권1호
• /
• pp.31-39
• /
• 1977

The patient, 18-year-old girl, had a class III malocclusion with the lateral compression of the maxilla due to the premature loss of the canines, mild mandibular prognathism, and mouth breathing habit. The treatment plan consisted of 1) rapid maxillary expansion 2) a period of retention 3) extraction of the first mandibular premolars instead of surgical correction 4) completion of orthodontic treatment with multibanded system. The maxilla was separated in the midline by the application of orthopedic forces via a cemented rapid maxillary expansion device. After 18 months, She gained functional overbite-overjet relationship, good interdigitation of buccal segments, and facial harmony due to the retraction of lower anterior teeth.

• Journal of Periodontal and Implant Science
• /
• 제40권5호
• /
• pp.220-226
• /
• 2010

Purpose: This study was performed to evaluate the periodontal wound healing effect of particulate equine bone mineral on canine alveolar bone defects. Methods: Twelve adult male beagle dogs were used as study subjects. The mandibular second and fourth premolars were extracted prior to the experimental surgery, and the extraction sites were allowed to heal for 8 weeks. After periodontal probing, two-walled defects were created at the mesial and distal sides of the mandibular third premolars bilaterally, and the defects were filled with equine particulate bone with collagen membrane or bovine particulate bone with collagen membrane, or collagen membrane alone. The defects without any treatment served as negative controls. After probing depth measurement, animals were sacrificed at 10, 16, and 24 post-surgery weeks for micro-computed tomographic and histomorphometric analysis. Results: The equine particulate bone-inserted group showed significantly decreased values of probing depth and first bone contact compared to the negative control and collagen membrane alone groups at weeks 10, 16, and 24 (P<0.05). There were no significant differences in the new cementum length, newly-formed bone area, or newly-formed bone volume between equine particulate bone- and bovine particulate bone-inserted groups, both of which showed significantly increased values compared to the negative control and collagen membrane alone groups (P<0.05). Conclusions: Equine particulate bone showed significant differences in probing depth, first bone contact, new cementum length, newly formed bone area, and bone volume fraction values when compared to the negative control and collagen membrane alone groups. There were no significant differences between equine and bovine particulate bone substitutes in these parameters; therefore, we can conclude that equine particulate bone is equivalent to bovine bone for periodontal regeneration.

• 대한치과교정학회지
• /
• 제48권3호
• /
• pp.153-162
• /
• 2018

Objective: The aim of this trial was to compare the alignment efficiency and intermaxillary arch dimension changes of nickel-titanium (NiTi) or copper-nickel-titanium (CuNiTi) round archwires with increasing diameters applied sequentially to the mandibular arch. Methods: The initial alignment phase of fixed orthodontic treatment with NiTi or CuNiTi round archwires was studied in a randomly allocated sample of 66 patients. The NiTi group comprised 26 women, 10 men, and the CuNiTi ($27^{\circ}C$) group comprised 20 women, 10 men. The eligibility criteria were as follows: anterior mandibular crowding of minimum 6 mm according to Little's Irregularity Index (LII), treatment requiring no extraction of premolars, 12 to 18 years of age, permanent dentition, skeletal and dental Class I malocclusion. The main outcome measure was the alignment of the mandibular anterior dentition; the secondary outcome measure was the change in mandibular dental arch dimensions during 12 weeks. Simple randomization (allocation ratio 1:1) was used in this single-blind study. LII and mandibular arch dimensions were measured on three-dimensional digital dental models at 2-week intervals. Results: No statistically significant difference was observed between NiTi and CuNiTi according to LII (p > 0.05). Intercanine and intermolar arch perimeters increased in the CuNiTi group (p < 0.001). Inter-first premolar width showed a statistically significant interaction in week ${\times}$ diameter ${\times}$ application (p < 0.05). Conclusions: The effects of NiTi and CuNiTi round archwires were similar in terms of their alignment efficiency. However, the intercanine and intermolar arch perimeters, and the inter-first premolar width changes differed between groups.

• Journal of Korean Dental Science
• /
• 제7권2호
• /
• pp.66-79
• /
• 2014

Purpose: To analyze the amount and pattern of tooth movement and the changes in arch dimension of mandibular dentition after orthodontic treatment using a new three-dimensional (3D)-indirect superimposition method. Materials and Methods: The samples consisted of fifteen adult patients with class I bialveolar protrusion and minimal anterior crowding, treated by extraction of four first premolars with conventional sliding mechanics. After superimposition of 3D-virtual maxillary models before and after treatment using best-fit method, 3D-virtual mandibular model at each stage was placed into a common coordinate of superimposition using 3D-bite information, which resulted in 3D-indirect superimposition for mandibular dentition. The changes in mandibular dental and arch dimensional variables were measured with Rapidform 2006 (INUS Technology). Paired t-test was used for statistical analysis. Result: The anterior teeth moved backward, displaced laterally, and inclined lingually. The posterior teeth showed statistically significant contraction toward midsagittal plane. The amounts of backward movement of anterior teeth and forward movement of posterior teeth showed a ratio of 6 : 1. Although the inter-canine width increased slightly (0.8 mm, P<0.05), the inter-second premolar, inter-first molar, and inter-second molar widths decreased significantly with similar amounts (2.2 mm, P<0.05; 2.3 mm, P<0.01; 2.3 mm, P<0.001). The molar depth decreased (6.7 mm, P<0.001) but canine depth did not change. Conclusion: A new 3D-indirect superimposition of the mandibular dentitions using best-fit method and 3D-bite information can present a guideline for virtual treatment planning in terms of tooth position and arch dimension.

• 치과방사선
• /
• 제27권1호
• /
• pp.217-230
• /
• 1997

The location of the mandibular canal and the cortical thickness of the mandible is important in the practice of dentistry. This study was performed on twenty chosen dry mandibles, which were of adults and included fully erupted premolars and molars. The purpose of this study was to evaluate the location of the mandibular canal and the cortical thickness of the mandible on computed tomograms and to aid in the surgical treatment plans. The obtained results were as follows; 1. The horizontal distance between the mandibular canal and the buccal external border was 6.6±0.9mm on Somesial root of the first molar), and it was increased posteriorly. The horiwntal distance between the mandibular canal and the lingual external border was 4.1±1.lmm on S/sub 0/, and it was decreased posteriorly. 2. The vertical distance between the alveolar crest and the mandibular canal was 16.9±1.6mm on S/sub 0/, and it was decreased posteriorly. The vertical distance between the inferior border of mandible and the mandibular canal was 8.8±1.3mm on S/sub 0/, and it was increased anteriorly and posteriorly. 3. The thickness of the buccal cortical plate was 2.2±0.4mm on S/sub 0/. and it was increased posteriorly. But, that of the lingual cortical plate was 2.0±0.6mm on S/sub 0/ and it was decreased posteriorly. 4. The area of the buccal cortical plate was 66.5±1.0mm² on S/sub 0/. and it was increased posteriorly. But, that of the lingual cortical plate was 65.8±0.9mm² on S/sub 0/ and it was decreased posteriorly.

• 대한치과기공학회지
• /
• 제34권4호
• /
• pp.473-482
• /
• 2012

Purpose: The purpose of this study was to investigate the stress distribution of the surrounding tissues according to 3 proximal plate types of the RPI clasp. Methods: The removeable partial denture which mandibular right and left second premolars and mandibular molars were lost was attached to a three dimensional photo elastic epoxy resin model. Then 120N of vertical load was applied. After 3-dimensional photoelastic stress analysis was used to record the isochromatic fringe patterns. Results: Kratochvil type guiding plane exhibited little uniform stress distribution on load center and alveolar ridge, but higher stress concentration on buccal surface of second premolar. Krol type guiding plane exhibited the stress concentration on the front of load center and relatively higher stress concentration on buccal surface of first premolar. However, this type had no effect on canine. Researcher type guiding plane showed the stress concentration on second premolar and molar, but the little stress distribution on first premolar. Conclusion: In all types, excessive stress concentration was appeared and three types were not significant different.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.70-86
• /
• 1996

The purpose of this study was to analyze the stress distribution in mandibular second premolars restored with different post and core techniques. Sixteen two-dimensional finite element model of mandibular second premolars restored with post and core and complete crown were developed according to the diameter, length, and material of post and core. Vertical force, 10N in magnitude, was applied first to the central fossa and then $45^{\circ}$ oblique force of same magnitude was applied to the buccal contact surface of buccal cusp. The obtained results were as follows : 1. Stress distribution within the dentin 1) Regardless of the material of the post and core and the diameter and length of the post, the pattern of stress distribution within the dentin was similar. 2) Maximum dentinal stress was observed on the lingual root surface of alveolar crest level with oblique loading and on lingual side of root dentin at the crown margin on vertical loading. 3) Cast post and cores produced the lowest dentinal stress concentrations and the highest stress concentration was observed in composite resin post and cores. 2. Stress distribution within the post and core 1) Within the amalgam and composite resin post and core, the patterns and maximum values of stress were similar. Maximum stress located at the central fossa of core portion on vertical loading and at the lingual junction of post and core with oblique loading. 2) Among the all post and cores, the cast post and core registered the highest stress concentration and maximum stress value within the post. Maximum stress located at the post apex on vertical loading and at lingual half of the post surface with oblique loading. 3) In case of Para-post and amalgam core, maximum stress located at the central fossa of core portion and lingual tip of the post head on vertical loading. With oblique loading, maximum stress located at the lingual half of the post surface.

• Imaging Science in Dentistry
• /
• 제39권1호
• /
• pp.19-25
• /
• 2009

Purpose: To longitudinally observe the healing process of extracted socket and the alterations of the residual ridge in healthy adult dogs using cone beam CT (CBCT). Materials and Methods: The mandibular premolars of two beagle dogs were removed and the extraction sites were covered with the gingival tissue. CBCTs (3D X-ray CT scanner, Alphard vega, Asahi Co.) were taken at baseline and at 1 week interval for 12 weeks. Radiographic density of extracted wounds was measured on normalized images with a custom-made image analysis program. The amount of alveolar crestal resorption after the teeth extraction was measured with a reformatted three-dimensional image using CBCT. Bony healing pattern of extracted wound of each group was also longitudinally observed and analyzed. Results: Dimensional changes occurred during the first 6 weeks following the extraction of dogs' mandibular premolars. The reduction of the height of residual ridge was more pronounced at the buccal than at the lingual aspect of the extraction socket. Radiographic density of extracted wounds increased by week 4, but the change in density stabilized after week 6. New bone formation was observed at the floor and the peripheral side of extracted socket from week 1. The entrance of extracted socket was sealed by a hard-tissue bridge at week 5. Conclusion: The healing process of extracted wound involved a series of events including new bone formation and residual ridge resorption.

• 대한소아치과학회지
• /
• 제35권2호
• /
• pp.243-258
• /
• 2008

본 연구는 성장 중인 부정교합 환자의 진단이나 치료계획의 수립, 치료방법 및 시기, 예후 등을 결정하는데 중요한 판단 지침이 되는 치아 석회화 단계와 경추 및 수완부골 성숙도간의 연관성을 규명하여 개인의 보다 정확하고 효율적인 사춘기 성장 정도를 평가하기 위해 시행하였다. 전신 질환이 없고 교정 치료 경험이 없는 7-16세의 여아 154명, 남아 179명, 총 333명의 파노라마 방사선사진, 측모 두부규격 방사선사진, 수완부 방사선사진을 분석하여 평가하였다. 연구 결과, 파노라마 방사선사진의 치아 석회화 단계를 통하여 사춘기 성장 정도를 평가하는 것은 부정교합 환자의 진단 및 치료계획을 수립하는데 임상적으로 유용한 정보를 제공할 것으로 판단되었다.