• Imaging Science in Dentistry
• /
• v.39 no.2
• /
• pp.89-92
• /
• 2009

Purpose: To assess the angle between mandibular canal and occlusal plane at each posterior tooth region and location of mental foramen on the panoramic radiographs. Materials and Methods: This study analysed 46 half-mandibles of panoramic radiographs. Inferior border of mandibular canal was traced. Occlusal plane was drawn from lingual cusp tip of the first premolar to distolingual cusp tip of the second molar. Perpendicular line from occlusal plane was drawn at each tooth region and then tangential lines were drawn from the crossing points at canal. the angle between occlusal plane and tangential line was measured. The location of mental foramen was also studied. According to the location of mental foramen, radiographs were divided into M (mesial) group and D (distal) group on the basis of the second premolar. and then inter-group analysis about mandibular canal angle was done. Results: The angles of mandibular canals were -17.7$^{\circ}$, -9.5$^{\circ}$, 8.2$^{\circ}$, 22.3$^{\circ}$, and 39.2$^{\circ}$at first premolar, second premolar, first molar, second molar, and third molar, respectively. The commonest position of the mental foramen was distal to the second premolar. Inter-group comparison showed statistically significant difference at the second premolar and the first molar(p<0.001). Conclusion: The knowledge of mandibular canal angle and location of mental foramen can help understanding the course of mandibular canal. (Korean J Oral Maxillofac Radiol 2009; 39: 89-92)

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.154-163
• /
• 2006

Tooth morphology is the most important scientific aspect of dental medicine in regards to the treatment and study of teeth attrition relating to the absence of teeth due to dental caries or the occlusion of teeth due to external force. Most of the studies have focused on the external morphology in cutting teeth regardless of sex and age. However, the importance of internal morphology in the treatment of damaged teeth has been increased. Therefore, this study established the measurement criteria for the morphology of the mandibular first premolar which had never been presented, in order to investigate the external and internal morphologies of mandibular first premolars, and introduced a non-destructive method such as a microcomputed tomogrphy. Mandibular first premolars in superlative state were taken from molars of middle aged males and females and used as specimens for this study. Criteria relating to the internal and external morphology measurements were established to quantify the length of the teeth in identical state. Two dimensional image data for the selected mandibular first premolar were obtained by taking the image of each O.022mm section, which is perpendicular to the vertical direction using the microcomputed tomography. The Vworks program was applied to measure the length of each morphological part according to the set measurement criteria. These measured data were compared with the data presented by G. V. Black and the internal and external morphologies of the teeth of middle aged Koreans were also compared according to gender. In addition, the methodology for measurement of the mandibular first premolar was presented and according to this, the standardized mandibular first premolars of middle aged Korean males and females were made by using a rapid prototyping system.

• The korean journal of orthodontics
• /
• v.46 no.3
• /
• pp.171-179
• /
• 2016

Objective: The primary aim of the study was to generate new prediction equations for the estimation of maxillary and mandibular canine and premolar widths based on mandibular incisors and first permanent molar widths. Methods: A total of 2,340 calculations (768 based on the sum of mandibular incisor and first permanent molar widths, and 1,572 based on the maxillary and mandibular canine and premolar widths) were performed, and a digital stereomicroscope was used to derive the the digital models and measurements. Mesiodistal widths of maxillary and mandibular teeth were measured via scanned digital models. Results: There was a strong positive correlation between the estimation of maxillary (r = 0.85994, $r^2=0.7395$) and mandibular (r = 0.8708, $r^2=0.7582$) canine and premolar widths. The intraclass correlation coefficients were statistically significant, and the coefficients were in the strong correlation range, with an average of 0.9. Linear regression analysis was used to establish prediction equations. Prediction equations were developed to estimate maxillary arches based on $Y=15.746+0.602{\times}sum$ of mandibular incisors and mandibular first permanent molar widths (sum of mandibular incisors [SMI] + molars), $Y=18.224+0.540{\times}(SMI+molars)$, and $Y=16.186+0.586{\times}(SMI+molars)$ for both genders, and to estimate mandibular arches the parameters used were $Y=16.391+0.564{\times}(SMI+molars)$, $Y=14.444+0.609{\times}(SMI+molars)$, and $Y=19.915+0.481{\times}(SMI+molars)$. Conclusions: These formulas will be helpful for orthodontic diagnosis and clinical treatment planning during the mixed dentition stage.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.340-347
• /
• 2022

Distal displacement of the tooth germ of the mandibular second premolar (MnP2) leads to its impaction and obturation of the eruption path of the mandibular first molar delaying its eruption. The present case report describes the treatment of 2 cases of eruption guidance for distally displaced developing MnP2 that caused delayed eruption of the mandibular first molar. Intentional extraction of primary predecessor results in the mesial shift of the displaced MnP2. However, unfavorable distal ectopic eruption of the mandibular first premolar after the premature loss of primary second molar has been previously reported. Hemisection and sequential extraction of the mandibular primary second molar were performed to mesially shift the distally displaced MnP2, while preventing unfavorable distal ectopic eruption of the mandibular first premolar.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.13 no.1
• /
• pp.117-126
• /
• 1983

The mandibular canal must be considered carefully during surgical treatment, especially surgical extraction of the impacted tooth and intraosseous implant because it contains the important inferior alveolar nerve and vessels. The author investigated the curvatUre of the mandibular canal, the positional frequency of mandibular foramen to the occlusal plane and gonial angle and the positional frequency of the mental foramen to the tooth site using orthopantomograms. The materials consisted of 295 orthopantomograms divided into seven groups ranging from the first decade to 6th. decade. The results were as follows: 1. The position of mandibular foramen was most frequently below occlusal plane in Group Ⅰ (78.6%) and Group Ⅱ (71.2%), above occlusal plane in Group Ⅲ (63.0%), Group IV (71.1%), Group V (57.6%), Group (76.7%) and Group VII (70.0%). 2. The curvature of mandibular canal was 142.8° in Group Ⅰ, 142.09° in Group Ⅱ, 139.34° in Group Ⅲ, 141.48° in Group Ⅳ, 138.45° in Group Ⅴ, 140.77° in Group Ⅵ and 143.89° in Group Ⅶ. 3. The gonial angie was 125.82° in Group Ⅰ, 123.18° in Group Ⅱ, 124.06° in Group Ⅲ, 120.45° in Group Ⅳ, 121.12° in Group Ⅴ, 121.63° in Group Ⅵ and 121.24° in Group Ⅶ. 4. The position of the menta] foramen was most frequently below the apex of mandibular first premolar in Group Ⅰ (57.2%), between the apex of mandibular first and second premolar in Group Ⅱ (59.6%) and Group Ⅲ (48.9%), and below the apex of mandibular second premolar in Group Ⅳ (39.2%), Group Ⅴ (48.5%) Group Ⅵ(46.6%) and Group Ⅶ(56.4%)

• The korean journal of orthodontics
• /
• v.43 no.5
• /
• pp.218-224
• /
• 2013

Objective: To examine the effect of bite force on the displacement and stress distribution of orthodontic mini-implants (OMIs) in the molar region according to placement site, insertion angle, and loading direction. Methods: Five finite element models were created using micro-computed tomography (microCT) images of the maxilla and mandible. OMIs were placed at one maxillary and two mandibular positions: between the maxillary second premolar and first molar, between the mandibular second premolar and first molar, and between the mandibular first and second molars. The OMIs were inserted at angles of $45^{\circ}$ and $90^{\circ}$ to the buccal surface of the cortical bone. A bite force of 25 kg was applied to the 10 occlusal contact points of the second premolar, first molar, and second molar. The loading directions were $0^{\circ}$, $5^{\circ}$, and $10^{\circ}$ to the long axis of the tooth. Results: With regard to placement site, the displacement and stress were greatest for the OMI placed between the mandibular first molar and second molar, and smallest for the OMI placed between the maxillary second premolar and first molar. In the mandibular molar region, the angled OMI showed slightly less displacement than the OMI placed at $90^{\circ}$. The maximum Von Mises stress increased with the inclination of the loading direction. Conclusions: These results suggest that placement of OMIs between the second premolar and first molar at $45^{\circ}$ to the cortical bone reduces the effect of bite force on OMIs.

• The Journal of the Korean dental association
• /
• v.57 no.11
• /
• pp.654-663
• /
• 2019

This case report describes the management of a 30-year-old woman with hopeless mandibular first molars and right maxillary second premolar. The treatment plan included mandibular second and third molar protraction after extraction of mandibular first molars. Mini-implants were placed between roots of first and second premolar. Sliding mechanics with lever arm was used to prevent inclination of molars. A good functional occlusion was achieved in 38 months without clinically significant side effects. Most of the extraction space of mandibular first molar was closed by protraction of second and third molars. The skeletal Class II pattern was improved by counterclockwise rotation of mandible through reduction of wedge effect. Mandibular molar protraction with orthodontic mini-implants in adequate cases would be a great alternative to prosthetic implant and reduce the financial and surgical burden of patients.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.252-255
• /
• 2005

Mandibular first premolars obtained from the middle-aged men about the ages of 50 were scanned using a Micro-CT. A Jig was made for a Micro-CT measurement to get reliable data from irregular teeth shape. Data were measured from the scanned 2-D images by way of measurement software. the methodology fer measurement of the mandibular first premolar was presented and according to this, the standardized mandibular first premolars of middle aged Korean males and females were made by using a rapid prototyping system.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.324-328
• /
• 2014

Aberrant anatomy of mandibular premolars is very rare in Korean, but aberration can contribute the endodontic failure as it makes difficult to remove the irritants during cleaning and shaping procedure. This case report describes the successful root canal treatment of a rare mandibular first premolar with C-shaped root canal as using a cone-beam computed tomography to understand the internal shape of root canal system and a dental operating microscope to improve the magnification and illumination.

• The korean journal of orthodontics
• /
• v.45 no.4
• /
• pp.180-189
• /
• 2015

Objective: To compare the positions of the mandibular premolars in Angle Class I subjects according to vertical facial type. The results will provide a theoretical basis for predicting effective tooth movement in orthodontic treatment. Methods: Cephalometric parameters were determined using cone-beam computed tomography in 120 Angle Class I subjects. Subjects were categorized as short, normal, and long face types according to the Frankfort mandibular angle. Parameters indicating the position of the mandibular right premolars and the mandible were also measured. Results: The angle between the mandibular first premolar axis and buccal cortex, the distance between the root apex and buccal cortex, angle of vestibularization, arc of vestibularization, and root apex maximum movable distance were significantly greater in the short face type than in the long and norm face types. The angle between the mandibular second premolar axis and buccal cortex, the distance from root apex to buccal cortex, and the arc of vestibularization were significantly greater in the short face type than in the normal face type. Conclusions: There are significant differences in the mandibular premolar positions in Class I subjects according to vertical facial type.