• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.4
• /
• pp.431-441
• /
• 2021

Full-mouth rehabilitation with increasing vertical dimension can be used for patients with severely worn teeth. In severely worn teeth also, the alveolar process can be elongated to compensate for the reduced vertical dimension, and the patient's vertical dimension of occlusion can be kept constant. However, full-mouth rehabilitation with increasing vertical dimension must be carefully chosen, because the vertical dimension can be reduced by tooth wear. It is important to establish a treatment plan with the systematic diagnosis of the change in the vertical dimension and gain space for the prosthesis. It is necessary to change the vertical dimension to secure the restoration space and select the minimum vertical dimension elevation for the esthetic and functional goal. In this case report, the patient complained of difficulty during chewing due to a worn dentition and wanted esthetic improvement of the short mandibular anterior teeth. After systematic evaluation and diagnosis, we performed full-mouth rehabilitation with minimum vertical dimension elevation to obtain the space for restoration. This resulted in a stable and harmonious occlusion, and the functional and esthetic problems of the patient were solved after treatment. The patient was satisfied with the results of the treatment and maintained stable occlusion during the follow-up period.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.32.1-32.4
• /
• 2020

Background: Le Fort I osteotomy is a highly effective treatment for skeletal jaw deformities and is commonly performed. High Le Fort I osteotomy is a modified surgical procedure performed for improving the depression of the cheeks by setting the osteotomy higher than the conventional Le Fort I osteotomy. Developments in three-dimensional (3D) technology have popularized the use of 3D printers in various institutions, especially in orthognathic surgeries. In this study, we report a safe and inexpensive method of performing a high Le Fort I osteotomy using a novel 3D device and piezosurgery, which prevent tooth root injury without disturbing the operation field for patients with a short midface and long tooth roots. Results: A 17-year-old woman presented with facial asymmetry, mandibular protrusion, a short midface, and long tooth roots. We planned high Le Fort I osteotomy and bilateral sagittal split ramus osteotomy. Prevention of damage to the roots of the teeth and the infraorbital nerve and accurate determination of the posterior osteotomy line were crucial for clinical success. Le Fort I osteotomy using 3D devices has been reported previously but were particularly large in size for this case. Additionally, setting the fixing screw of the device was difficult, because of the risk of damage to the roots of the teeth. Therefore, a different surgical technique, other than the conventional Le Fort I osteotomy and 3D device, was required. The left and right parts of the 3D device were fabricated separately, to prevent any interference in the surgical field. Further, the 3D device was designed to accurately cover the bone surface from the piriform aperture to the infra-zygomatic crest with two fixation points (the anterior nasal spine and the piriform aperture), which ensured stabilization of the 3D device. The device is thin and does not interfere with the surgical field. Safe and accurate surgical performance is possible using this device and piezosurgery. The roots of the teeth and the infraorbital nerve were unharmed during the surgery. Conclusions: This device is considerably smaller than conventional devices and is a simple, low-cost, and efficient method for performing accurate high Le Fort I osteotomy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.146-156
• /
• 2024

Implant assisted removable partial denture (IARPD) has been practiced in various forms for a long time, and among them, implant surveyed crown RPD is gaining predictability as well as being considered as a treatment option for patients with anatomical and financial disadvantages. The position of implant could be divided as posterior placement or anterior placement according to the purpose of the treatment and should be planned in consider to the alveolar ridge of patient, anticipated prognosis of remaining teeth, and opposing dentition. This case report describes a treatment for mandibular Kennedy class I partial edentulous patient with two implant-supported surveyed crown and implant assisted removable partial denture. Given the difficulty of posterior placement in this patient and the prognosis of the residual teeth, the plan was to place two implants in close proximity to the residual teeth, which were placed in the planned position, angle, and depth using guided surgery. The process of fabricating the fixed prosthesis was carried out in parallel with the maxillary edentulous tooth arrangement process to increase predictability, and when fabricating the localized tooth, the implant was designed in a form that allows the patient to perform functional movements by preventing excessive loading as the last supporting tooth, and was fabricated through a secondary impression process. Each treatment procedure was proceeded as planned, with aesthetically and functionally satisfactory results for both patient and operator.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.3
• /
• pp.207-217
• /
• 2014

The purpose of the present study was to evaluate the relationship between the malocclusion and dental caries in adolescents with permanent dentition. The subjects of the study were 385 adolescents aged 12 to 15 years. Dental Aesthetic Index (DAI) and DMFT index were recorded as clinical indicators of malocclusion and dental caries. The mean Dental Aesthetic Index (DAI) score of the subjects was 12.42 and the mean DMFT index of the subjects was 2.89. Four students (1.04%) were included in the group of orthodontic treatment mandatory, which signifies the handicapping malocclusion. Moreover, the result of gender-specific analysis of the DAI components observed that the prevalence of midline diastema and mandibular overjet were significantly higher among boys (p < 0.05). In 7 components (missing teeth, incisal segment crowding, maxillary anterior irregularity, mandibular anterior irregularity, mandibular overjet, anterior openbite, antero-posterior molar relationship) among the 10 DAI components, abnormal groups showed significantly higher DMFT index than normal groups (p < 0.05). The subjects in the group of definite to handicapping malocclusion (DAI ${\geq}$ 26) showed significantly higher DMFT index than the subjects in the group of minor or no malocclusion (p < 0.01). In addition, the DAI score had significant positive linear correlation with the DMFT index (r = 0.584, p < 0.01). Consequently, the current findings suggested a positive relationship between the malocclusion and caries prevalence. And several specific types of malocclusion were supposed to be significantly correlated with dental caries.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.413-424
• /
• 2002

Preadolescent children with deficient maxillae are suitable candidates for the maxillary protraction appliance(MPA). The theoretical effect of the MPA is protraction or anterior displacement of the maxilla. However, it is known that complex effects such as anterior displacement of the maxillary teeth, downward and backward rotation of the mandible, linguoversion of the mandibular anterior incisors, are known to play a role in improving the Cl III malocclusion. There have been much studies with regard to maxillary protraction, but the different effects of MPAs depending on the vertical facial pattern are not known precisely. This study was based on 67 patients (31 males, 36 females) aged from 6 years 6 months to 13 years 3months, who visited the Dept. of Orthodontics at Yonsei Univ., Dental Hospital and diagnosed as skeletal Class III with maxillary deficiency. They were divided into 3 groups (low, average, high angle groups) depending on genial angle and the SNMP (Go-Gn) angle, respectively. Pretreatment and post-treatment lateral cephalograms were used to compare the effects of MPA and the following conclusions were obtained: 1) A significantly large amount of backward movement of the B point was observed in patients with a low SNMP angle. Those with a high SNMP angle had significant forward movement at A point. 2) The patients with low genial angle had the least forward movement at the A point, and those with a high angle had more forward movement. 3) In comparing the arcTan of the A point, the high angle group showed more horizontal movement while the low angle group showed more vertical movement. 4) There was no significance between the treatment duration of the SNMP and the Genial angle groups.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.248-261
• /
• 1999

In order to define a current set of Korean children norm with mixed dentition, following study was done. The subjects were 102 healthy dentition contestants(48boys, 54girls). Standardized lateral head roentgenograms were taken, and Ricketts analysis was done. Results were as follows: 1. Length of anterior cranial base, posterior facial height, corpus length were longer in male than in female(p<0.05), and Porion was located posteriorly in male than in female(p<0.01). 2. Through facial depth, Pogonion of male was more forwardly positioned(p<0.05), mandible was significantly steeper in female, and maxillary anterior teeth were significantly tipped forward in male(p<0.05). 3. Variables such as length of anterior cranial base, upper molar position(p<0.01) and corpus length(p<0.05) were significantly changed by age. 4. Maxillary height, facial depth, mandibular plane angle, convexity were changed by age, but not significantly(p>0.05).

• The korean journal of orthodontics
• /
• v.34 no.2 s.103
• /
• pp.109-119
• /
• 2004

This study aimed at investigating the skeletal, dentoalveolar, and soft tissue changes of Class III malocclusion cases treated by second molar extraction. The lateral cephalograms of 15 subjects with moderate Class III malocclusion by average ANB $-1.4^{\circ}\;and\;IMPA\;85^{\circ}$ were traced and the computerized superimposition of average craniofacial change was made. The data was gathered and statistically analyzed. The results were as follows: 1 Lower anterior facial height/anterior facial height increased by 0.6%(P<0.01), mandibular plane increased by $1.5^{\circ}$(P<0.05). 2. There was a slightly downward & backward rotation of the mandible. 3. Lower first molar tipped distally by 4.nm(P<0.001), lower anterior teeth lingually tipped by $3.2^{\circ}$(P<0.05). 4. Retracted lower lip improved facial profile. This study may suggest that second molar extraction could be effective for a moderate Class III malocclusion to make distalization of the lower first molar easier and avoid severe lingual tipping of the lower incisor, if the lower third molar has a normal shape, good direction of eruption and adequate time for lower second molar extraction

• Imaging Science in Dentistry
• /
• v.49 no.4
• /
• pp.257-263
• /
• 2019

Purpose: This study was performed to evaluate the dimensional accuracy of digital dental models constructed from cone-beam computed tomographic (CBCT) scans of polyvinyl siloxane (PVS) impressions and cast scan models. Materials and Methods: A pair of PVS impressions was obtained from 20 subjects and scanned using CBCT (resolution, 0.1 mm). A cast scan model was constructed by scanning the gypsum model using a model scanner. After reconstruction of the digital models, the mesio-distal width of each tooth, inter-canine width, and inter-molar width were measured, and the Bolton ratios were calculated and compared. The 2 models were superimposed and the difference between the models was measured using 3-dimensional analysis. Results: The range of mean error between the cast scan model and the CBCT scan model was -0.15 mm to 0.13 mm in the mesio-distal width of the teeth and 0.03 mm to 0.42 mm in the width analysis. The differences in the Bolton ratios between the cast scan models and CBCT scan models were 0.87 (anterior ratio) and 0.72 (overall ratio), with no significant difference (P>0.05). The mean maxillary and mandibular difference when the cast scan model and the CBCT scan model were superimposed was 53 ㎛. Conclusion: There was no statistically significant difference in most of the measurements. The maximum tooth size difference was 0.15mm, and the average difference in model overlap was 53 ㎛. Digital models produced by scanning impressions at a high resolution using CBCT can be used in clinical practice.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.769-779
• /
• 1995

The understanding the nature of occlusal tooth contacts of natural dentition is important for correct diagnosis and treatment of diseases developed in stomatognatic system. Several investigator have studied the distribution of tooth contacts in maximum intercuspation and have repored contact locations with respect to the tooth position. However, there are few report the variation of the occlusal contact point with change in each head position. This study analysed the number of occlusal contact point with change in each head position. 30 subject(male 17, female 13), who ahad natural occlusion and no symptoms of temporomandibular disorder, were selected. The numbers and patterns of tooth contact were recorded by silicone bite registration on stone model at four different head positions with head anguration gauge(from the supine to the upright position). The results obtained were as follows : 1. The numbers of total occlusal contact point on teeth increased to average 25, 29, 35, 42 points as head angulation was changed from the supine to the upright position against the ala-tragus line, and there was significant difference(P<0.05). 2. In the 19 subject(65%)of total 30 subject, the perforated point of the silicone bite indicated that the locus for the prime contact point moved mesially as the head angulation was changed from the supine to the upright position. 3. On the basis of the fact that the anterior occlusal contact point increase as head angulation changed from the supine to the upright position, we could find that the mandibular position is moved anteriorly.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.113-128
• /
• 1995

The purpose of this study was to investigate the effect of stannous fluoride on the dentin bonding with three kinds of commercially available dentin bonding systems containing different adhesive monomers. Dentin specimens with exposed labial dentin prepared from freshly extracted bovine mandibular anterior teeth were divided into experimental and control groups. The specimens of experimental groups were bonded with dentin bonding systems and composite resins including All bond 2 ㅡ& Bisfil, Scotchbond Multi-Purpose & Z100, and Denthesive II Charisma after 2 % stannous& fluorided application for S minutes and washing for 1 minute. The specimens of control groups were bonded with the same dentin bonding systems and composite resins as used in the experimental groups. After bonded specimens were stored in $37^{\circ}C$ distilled water for 24 hours, the tensile bond strength and cohesive failure rate were measured, and then the pretreated dentin surfaces and the fractured dentin surfaces were examined under scanning electron microscope. The results were as follows : Mean bond strength of stannous fluoride applied groups of All bond 2, Scotchbond MP, and Denthesive II were 2.5MPa, 1.1MPa, and 1.1MPa respectively, and those of control groups were 7.5MPa, 8.1MPa, and 4.6MPa. Bond strength values of stannous fluoride applied groups were significantly lower than those of the control groups(p<0.05). SEM findings of dentin surfaces after stannous fluoride application demonstrated an appearance of partially remained smear layer and smear plugs inspite of pretreatment with 10 % phosphoric aicd or maleic acid solution, and an appearance of smear layer covered surface under Denthesive II priming. But those of control groups commonly showed clean dentin surfaces without smear layer and smear plugs. On SEM observation of the fractured dentin-resin interface, while most of the specimens of stannous fluoride applied groups showed adhesive failure mode, those of All bond 2 and Scotchbond MP control groups showed mainly adhesive-cohesive mixed failure mode, and mainly adhesive failure mode in Denthesive II control group.