• The korean journal of orthodontics
• /
• v.47 no.1
• /
• pp.21-30
• /
• 2017

Objective: The aim of this study was to investigate the three-dimensional (3D) position of the center of resistance of 4 mandibular anterior teeth, 6 mandibular anterior teeth, and the complete mandibular dentition by using 3D finite-element analysis. Methods: Finite-element models included the complete mandibular dentition, periodontal ligament, and alveolar bone. The crowns of teeth in each group were fixed with buccal and lingual arch wires and lingual splint wires to minimize individual tooth movement and to evenly disperse the forces onto the teeth. Each group of teeth was subdivided into 0.5-mm intervals horizontally and vertically, and a force of 200 g was applied on each group. The center of resistance was defined as the point where the applied force induced parallel movement. Results: The center of resistance of the 4 mandibular anterior teeth group was 13.0 mm apical and 6.0 mm posterior, that of the 6 mandibular anterior teeth group was 13.5 mm apical and 8.5 mm posterior, and that of the complete mandibular dentition group was 13.5 mm apical and 25.0 mm posterior to the incisal edge of the mandibular central incisors. Conclusions: Finite-element analysis was useful in determining the 3D position of the center of resistance of the 4 mandibular anterior teeth group, 6 mandibular anterior teeth group, and complete mandibular dentition group.

• Journal of Technologic Dentistry
• /
• v.13 no.1
• /
• pp.21-26
• /
• 1991

The mesiodistal crown diameters and crown length of the permanent anterior teeth have been studied and analyzed about the mean size, S.D, S.E etcs from stone models of 100 Korean male and 74 female. From the study, the following conclusions were made : 1. Statistical differences of left and right teeth were not found in the mesio distal crown diameters and crown length of the permanent anterior teeth. 2. The mean values of mesiodistal crown diameters of permanent anterior teeth were slightly larger in male than in females and statistical differences of males and females were found in maxillary right central incisor, mandibular left canine, mandibular right lateral incisor and mandibular right canine. 3. The mean values of crown length of permanent anterior teeth were slightly larger in male than in female and statistical differences of males and females were found in mandibular left canine, mandibular right canine. 4. Mesiodistal crown diameters and crown length of maxillary left lateral incisors and right lateral incisors of female are larger than that of male.

• The Journal of the Korean dental association
• /
• v.14 no.10
• /
• pp.841-843
• /
• 1976

The author observed the eruption pattern of mandibular anterior teeth by orthopantonography taken by children who came to pedodontic department, school of dentistry, S.N.U. and then got the following results. 1) In the degree of eruption pattern of anterior teeth, female is slightly faster than male. 2) Eruption pattern of central incisors was similar to lateral incisor, but the degree of lateral incisors movement was more severe. 3) Eruption pattern of canine was out of normal process when the adjacent teeth were abscence and there was not distal movement such as in maxillary canine.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.17-24
• /
• 1976

The primary objective of this study was to define the differences that exist. between different sexes on the dentoskeletal framework and the soft tissue profile around the mouth. For the purpose of this study, cephalometric radiographs were obtained from the centric occlusion with closed lip position, through the research on each 42 males and females aged from 17 to 22 years with normal occlusion and acceptable facial appearence. The results were as follows: 1. Maxillary to mandibular relationships. Among the angles formed by the long axis of the maxillary and mandibular anterior teeth, the maxillary and mandibular anterior alveolar bone, and the lower and upper lips (Fig.2), only the angle formed by the lips was more acute in males than in females. The males have a more rounded profile, and the females have a flatter profile in the lower third of the face. The differences is statistically significant for the angle formed by the lips. The fact that the lips have a difference greater than that of teeth or the alveolar bone indicates that the lip position is not entirely due to tooth and bony support. Possibly the thickness of the lips has an influence. 2. Occlusal plane. The occlusal plane was related to the anterior tooth inclination, anterior alveolar bone profile, and the lip contour, both maxillary and mandibular (Fig.3). Only the angle related to lower lip was statistically significant. The females again had the more obtuse angle, indicating a flatter profile than that of the males. 3.Skeletal planes. The angles formed by the anterior maxillary lips, teeth, and alveolar bone with the Frankfort plane and the angles of the mandibular lips, teeth, and, alveolar bone and the mandibular plane were investigated (Fig.4). Results were similar to those from maxillary to mandibular relationships. The results were statistically significant for the upper lip and the lower lip, only. 4. Esthetics. The facial line and the mandibular plane were compared with the esthetic line. These angles were different for the different sexes, but only the latter was statistically significant. This difference may be due to the profile contour of the nose.

• Restorative Dentistry and Endodontics
• /
• v.29 no.6
• /
• pp.515-519
• /
• 2004

Straight access cavity design allows the operator to locate all canals, helps in proper cleaning and shaping, ultimately facilitates the obturation of the canal system. However, change in the fracture strength according to the access cavity designs was not clearly demonstrated yet. The purpose of this study was to determine the influence of different access cavity designs on the fracture strength in endodontically treated mandibular anterior teeth. Recently extracted mandibular anterior teeth that have no caries, cervical abrasion, and fracture were divided into three groups (Group 1 : conventional lingual access cavity, Group 2 : straight access cavity, Group 3 : extended straight access cavity) according to the cavity designs. After conventional endodontic treatment, cavities were filled with resin core material. Compressive loads parallel to the long axis of the teeth were applied at a crosshead speed of 2mm/min until the fracture occurred. The fracture strength analyzed with ANOV A and the Scheffe test at the 95% confidence level. The results of this study were as follows: 1. The mean fracture strength decrease in following sequence Group 1 (4558.90{\;}\pm{\;}77.40{\;}N$), Group 2 ($494.07{\;}\pm{\;}123.98{\;}N) and Group 3 ($267.33{\;}\pm{\;}27.02{\;}N). 2. There was significant difference between Group 3 and other groups (P = 0.00). Considering advantage of direct access to apical third and results of this study, straight access cavity is recommended for access cavity form of the mandibular anterior teeth.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.72-75
• /
• 2012

PURPOSE. This study evaluated the existence of golden proportion between the widths of the maxillary and mandibular anterior teeth in Indian population. MATERIALS AND METHODS. The clinical tooth width measurements were recorded with the digital vernier calipers on 576 patients of both sexes in the age group of 21 - 30 years. Flexible ruler was used to determine the width of maxillary and mandibular anterior teeth on the patients by the same operator. The data obtained was statistically analyzed using paired student t-test (${\alpha}$=.05). RESULTS. The golden proportion was not found between the width of the right central and lateral incisors in 53% of women and 47% of men. The results revealed the golden percentage was rather inconstant in terms of relative tooth width. CONCLUSION. The golden proportion is an inappropriate method to relate the successive widths of the maxillary anterior teeth in Indian population.

• Journal of Periodontal and Implant Science
• /
• v.53 no.6
• /
• pp.453-466
• /
• 2023

Purpose: This study aimed to quantify alveolar bone morphology, demonstrate the relationship between tooth angulation and alveolar bone thickness, and introduce a new classification for anterior mandibular teeth related to immediate implant placement (IIP). Methods: Cone-beam computed tomography (CBCT) images of 211 anterior mandibular teeth were analyzed in sagittal slices to measure the thickness of the facial alveolar bone crest (FAB1) and apex (FAB2), and the lingual alveolar bone crest (LAB1) and apex (LAB2). Tooth angulation was classified as 1°-10°, 11°-20°, and >20° according to the tooth's long axis and alveolar bone wall. Spearman correlation coefficients were used to evaluate correlations between the variables. Results: FAB1 and LAB1 were predominantly thin (<1 mm) (84.4% and 73.4%, respectively), with the lateral incisors being thinnest. At the apical level, FAB2 and LAB2 were thick in 99.5% and 99.1% of cases, respectively. Significant differences were documented in FAB2 (P=0.004), LAB1 (P=0.001), and LAB2 (P=0.001) of all mandibular teeth. At all apical levels of the inspected teeth, a significant negative correlation existed between TA and FAB2. Meanwhile, TA showed a significant positive correlation with LAB2 of the lateral incisors and canines. These patterns were then divided into class I (thick facial and lingual alveolar bone), class II (facially inclined teeth) with subtype A (1°-10°) and subtype B (11°-20°), and class III (lingually inclined teeth) with subtype A (1°-10°) and subtype B (11°-20°). Conclusions: Mandibular anterior teeth have predominantly thin facial and lingual crests, making the lingual bone apical thickness crucial for IIP. Although anchorage can be obtained from lingual bone, tooth angulation and tooth types had an impact on IIP planning. Hence, the new classification based on TA and alveolar bone wall may enable rational clinical planning for IIP treatment.

• The Journal of the Korean dental association
• /
• v.53 no.6
• /
• pp.402-410
• /
• 2015

The aims of occlusal adjustment are as follows: to eliminate occlusal interference, to redirect force generated during function to which is favorable for teeth, to improve mastication efficiency and simultaneously establish stable maximal intercuspation or centric occlusion. Also, it should permit mandible to move freely from all positions. The sequence of occlusal adjustment in natural teeth and fixed prosthesis shall be as follows: 1) Eliminate interference that prevent optimal intercuspation and recontouring adjustment 2) Establish maximal intercuspation 3) Eliminate interference in lateral mandibular movement 4) Eliminate interference in anterior mandibular movement 5) Refine occlusal relationships.

• The Journal of the Korean dental association
• /
• v.53 no.11
• /
• pp.844-854
• /
• 2015

This clinical report describes an orthodontic-prosthodontic interdisciplinary treatment for a patient with multiple missing teeth and unilateral scissors bite. A 47-year-old female presented with multiple missing posterior teeth, anterior large overjet, deep bite, and posterior scissors bite on the right premolar area. Periodontal therapy was performed and followed by orthodontic treatment. The maxillary anterior teeth were initially aligned, then two implants were placed for the left mandibular molars to increase occlusal vertical dimension. The scissors bite between the right maxillary and mandibular premolars were corrected using the miniscrews as an anchorage. Other implants were placed for the right maxillary and mandibular molars after the occlusal planes and occlusal relationship were harmonized. The patient adapted well to altered vertical dimension without any specific problems including peri-implant marginal bone loss. Interdisciplinary approach resolve the complex orthodontic-prosthodontic problems and concluded in successful results.

• The Journal of the Korean dental association
• /
• v.17 no.5 s.120
• /
• pp.345-350
• /
• 1979

The patient, 16 years female, complained of anterior cross-bite and retrusion of maxilla. Mandibular incisors occluded labially to maxillary incisors. Normally developed mandibular arch in normal elation to facial line, S-N-Pog was within normal range. Cross-bite of anterior teeth was corrected by means of Class III elastics under multibanded system. Space for alignment of crowding of upper anterior teeth was regained by means of cervical headgear and sliding yoke. She gained good alignment of anterior teeth and attractive facial profile after 2 years.