• The korean journal of orthodontics
• /
• v.40 no.5
• /
• pp.304-313
• /
• 2010

Objective: The aim of this study was to evaluate the occlusal force and contact area and to find its associating factors in Koreans. Methods: Occlusal force and contact area in maximum intercuspation were measured using the Dental $Prescale^{(R)}$ system in 651 subjects (15 with normal occlusion, 636 with various malocclusions divided into subgroups according to the skeletal pattern, Angle's molar relationship, age and gender). Results: Occlusal force of the normal occlusion group ($744.5{\pm}262.6N$) was significantly higher than those of the malocclusion group ($439.0{\pm}229.9N$, $p$ < 0.05). Occlusal force was similar regardless of differences in ANB angle or Angle's molar classification, however the increase in vertical dimension significantly reduced occlusal force ($p$ < 0.05). Conclusions: Occlusal force was significantly lower in the malocclusion group compared to the normal occlusion group, and in females compared to males, but it was not affected by age, antero-posterior skeletal pattern or molar classification. Although a hyperdivergent facial pattern indicated lower occlusal force compared to a hypodivergent facial pattern, the differences in skeletal pattern were not the primary cause of its decrease, but a secondary result induced by the differences in occlusal contact area according to the facial pattern.

• The korean journal of orthodontics
• /
• v.37 no.3 s.122
• /
• pp.212-219
• /
• 2007

Objective: The purpose of this study was to provide an anatomical reference for cortical bone and soft tissue thickness, and the attached gingiva width in the mandible. Methods: Fifteen males and fifteen females participated in this study. An acrylic template was fabricated and the radiopaque markers were bonded on the estimated alveolar crest to take measurements of the hard and soft tissue thickness at the same locations. CT images were taken in samples wearing an acrylic template. Cortical bone and soft tissue thickness were measured at 2, 4, 6 and 8 mm from the alveolar crest in interradicular spaces from central incisor to first permanent molar. The attached gingival width was calibrated. Results: Cortical bone thickness was $1.33{\pm}0.38mm$ and soft tissue thickness was $1.49{\pm}0.54mm$. Cortical bone thickness was increased in the posterior area, while it was not the case for the soft tissue thickness. In addition, the total thickness was $2.82{\pm}0.70$. The attached gingival width was wider in the anterior area compared to that in posterior area. Conclusion: These results suggest that the attached gingiva width should be considered upon placement of mini-implants in the mandibular posterior area for orthodontic anchorage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.244-250
• /
• 2017

The most important aspect determining the completeness of aprosthesis is itsmarginal and internal fit. Alloysare processed using a softening/hardening heat treatment methodin order to improve their mechanical, physical properties and polishing properties. To examinehow the heat treatment method affects the marginal and internal fit of the Ni-Cr alloy core,thirty dental stone models of the abutment of the mandibular left molar were manufactured.The Ni-Cr alloy coreswere manufactured by the dipping method for the experiment and dividedinto three groups; A for no heat treatment, B for softening heat treatment and C for hardening heat treatment. The marginal and internal fitsof all of the groups were measured by the silicone replica technique. A statistical analysis was performed using one-way ANOVA(${\alpha}=0.05$) in order to examine whether there is a significant difference in the average values of the marginal and internal fits among the three groups and it was found that themarginal fits (1, 6) were significantly different (p<0.05), but the internal fits (2, 3, 4, 5) were not significantly different (p>0.05). These results show that Ni-Cr alloys should not be processed bythe heat treatmentmethod.However, they need to be confirmed in further clinical application studies.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.316-323
• /
• 2017

Objectives: This study compared the amount of apically extruded bacteria during the glide-path preparation by using multi-file and single-file glide-path establishing nickel-titanium (NiTi) rotary systems. Materials and Methods: Sixty mandibular first molar teeth were used to prepare the test apparatus. They were decoronated, blocked into glass vials, sterilized in ethylene oxide gas, infected with a pure culture of Enterococcus faecalis, randomly assigned to 5 experimental groups, and then prepared using manual stainless-steel files (group KF) and glide-path establishing NiTi rotary files (group PF with PathFiles, group GF with G-Files, group PG with ProGlider, and group OG with One G). At the end of canal preparation, 0.01 mL NaCl solution was taken from the experimental vials. The suspension was plated on brain heart infusion agar and colonies of bacteria were counted, and the results were given as number of colony-forming units (CFU). Results: The manual instrumentation technique tested in group KF extruded the highest number of bacteria compared to the other 4 groups (p < 0.05). The 4 groups using rotary glide-path establishing instruments extruded similar amounts of bacteria. Conclusions: All glide-path establishment instrument systems tested caused a measurable apical extrusion of bacteria. The manual glide-path preparation showed the highest number of bacteria extruded compared to the other NiTi glide-path establishing instruments.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.13-18
• /
• 1995

Craniofacial asymmetry was analyzed in 39 patients with complete unilateral cleft lip and palate(UCLP). The samples are devided into three groups nine below 9 years, twenty three from 9 years 1 month to 14 years and seven over 14 years group. Seventeen measurements were obtained from the tracing of PA X-ray cephalometric headfilms to evaluate the asymmetric characteristics and changes accdording to aging in UCLP. The obtained results were as follows. 1. Facial asymmetry in UCLP is variable(1.22-3.47 $mm/^{\circ}$) and the length from midsagitta1 reference line to maxillary 1st molar, to upper central incisor and the length of mandibular ramus showed significant asymmetry 2. Nasal septum and anterior nasal spine were deviated In the cleft side and the lower border of nasal cavity was 1ower in cleft side. 3. The deviation of nasal septum was continued significantly till after 14 years old.

• Journal of Periodontal and Implant Science
• /
• v.28 no.4
• /
• pp.785-797
• /
• 1998

This study has been done to prove that keratinized gingiva is required for the periodontal health and to analyse the adequate width that is necessary. Until now, the study on frenum has been documented on changing its location. But the location or the formation of the frenum has not been reported. This experiment has used 173 patients from the department of periodontology of Dankook University to investigate the width of keratinized gingiva, the formation of the frenum and its location for the frequency. This study also looks into the relationship between the gingival recession and the structure of the frenum, and affects they have on periodontal health. The width of the keratinized gingiva in the mandible has been found to be highest in the lateral incisor than in the central incisor. The width decreased from the canine to the first premolar until it reached the molar. The interproximal area of the mandibular frenum was 77.9%, which was greater than the frequency (22.1%) from the midline of the teeth. The highest frequency of frenum was at 30.6% in between the both central incisor then second greatest at 20.6% in between the right canine and the right first premolar. Frenum was not found in between the second premolar and the distal area. In the morphology of the frenum, it was found that 43.4% out of 551 parts were found to be a single narrow frenum, and the double or triple ligamented form of the complex frenum were found in similar frequency of 237 parts, but the broad frenum was rarely frequent. The incisal area was popular mostly with the single narrow frenum, the left premolar area frequented 57.4%, and the right premolar frequented 64.7%. Because the distance between the frenum apex and the gingival margin measured to be about 5mm or greater, the frenum apex started in the mucogingival junction and not just below the keratinized gingiva. In the 551 area investigated, 48.3% of gingiva showed recession, incisal area had recession the least at 44.9%, right buccal side at 47.4%, and right buccal side frequented the highest at 52.1%. The teeth that showed recession recessed at the average of 2.151.0.mm and the left canine showed the greatest amount of gingival recession. In the investigation to find out if the keratinized gingiva and the gingiva recession had mutually related somehow, the width of keratinized gingiva showed no affect on the probing depth, but had affected in the gingiva recession. This investigation showed that the gingival recession and the morphology of the frenum related in that, the single narrow frenum had recessed the least and the broad frenum recessed the most. With this analysis, a conclusion was drawn that the morphology of the frenum had affected in the gingical recession.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.674-688
• /
• 2003

Statement of Problem : With increasing demand of the implant-supported prosthesis, it is advantageous to use the different platform width of the fixture according to bone quantity and quality of the patients. Purpose : The purpose of this study was to assess the loading distributing characteristics of two implant designs according to each platform width of fixture, under vertical and inclined loading using finite element analysis. Material and method : The two kinds of finite element models were designed according to each platform width of future (4.1mm restorative component x 11.5mm length, 5.0mm wide-diameter restorative component x 11.5mm length). The crown for mandibular first molar was made using UCLA abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone. This study simulated loads of 200N at the central fossa in a vertical direction, 200N at the outside point of the central fossa with resin filling into screw hole in a vertical direction and 200N at the buccal cusp in a 300 transverse direction individually Von Mises stresses were recorded and compared in the supporting bone, fixture, and abutment screw. Results : The stresses were concentrated mainly at the cortex in both vertical and oblique load ing but the stresses in the cancellous bone were low in both vertical and oblique loading. Bending moments resulting from non-axial loading of dental implants caused stress concentrations on cortical bone. The magnitude of the stress was greater with the oblique loading. Increasing the platform width of the implant fixture decreased the stress in the supporting bone, future and abutment screw. Increased the platform width of fixture decreased the stress in the crown and platform. Conclusion : Conclusively, this investigation provides evidence that the platform width of the implant fixture directly affects periimplant stress. By increasing the platform width of the implant fixture, it showed tendency to decreased the supporting bone, future and screw. But, further clinical studies are necessary to determine the ideal protocol for the successful placement of wide platform implants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.135-143
• /
• 2017

Purpose: This research was conducted to compare the marginal and internal fit of zirconia prostheses fabricated with the model scan method and the intraoral scan method. Materials and methods: In this study, 20 extracted human mandibular first molar was used in the preparation of abutment tooth for the fabrication of zirconia prostheses. In the first group, the model scan method was applied on 10 prepared teeth. In the other group, the intraoral scan method was used on other 10 prepared teeth. Datum of both groups were transmitted to the software system. Afterwards, 20 zirconia prostheses were fabricated using the Ceramill system. Weight technique was used to evaluate the internal gap of the zirconia prostheses. In the Replica technique, marginal gap of the zirconia prostheses were analyzed by optical microscopy. Statistical analysis was based on one-way ANOVA. Results: Model scan group showed lower average weight than intraoral scan group when weight technique was applied, which has significance (P < .05). Also, model scan group showed significantly lower figures in all 5 measurements of replica technique than intraoral scan group (P < .05). Conclusion: Zirconia prostheses of both groups demonstrated clinically acceptable margin and internal fit. However, model scanned zirconia prostheses showed higher marginal and internal fit than intraoral scanned crowns.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.2
• /
• pp.248-261
• /
• 1999

In order to define a current set of Korean children norm with mixed dentition, following study was done. The subjects were 102 healthy dentition contestants(48boys, 54girls). Standardized lateral head roentgenograms were taken, and Ricketts analysis was done. Results were as follows: 1. Length of anterior cranial base, posterior facial height, corpus length were longer in male than in female(p<0.05), and Porion was located posteriorly in male than in female(p<0.01). 2. Through facial depth, Pogonion of male was more forwardly positioned(p<0.05), mandible was significantly steeper in female, and maxillary anterior teeth were significantly tipped forward in male(p<0.05). 3. Variables such as length of anterior cranial base, upper molar position(p<0.01) and corpus length(p<0.05) were significantly changed by age. 4. Maxillary height, facial depth, mandibular plane angle, convexity were changed by age, but not significantly(p>0.05).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.1
• /
• pp.108-115
• /
• 2017

Numerous therapeutic approaches are available for impacted teeth, including orthodontic retraction, implantation, and autogenous tooth transplantation. Autotransplantation is a promising method, especially for juvenile patients, as it enables preservation of the function of the periodontal tissues, as well as continued alveolar bone growth. This report describes autotransplantation in two cases in which the tooth was fully-ectopically impacted. With case 1, an ectopically impacted premolar was extracted and transplanted in an upright position, and regenerative endodontic treatment was performed using a platelet-rich fibrin clot and mineral trioxide aggregate (MTA). With case 2, a calcifying odontogenic cyst with an impacted left mandibular second molar was treated by enucleation. The tooth was transplanted into the proper position 3 months after enucleation, and endodontic treatment was performed using MTA. In both cases, autotransplantation appeared to provide a simple and rapid treatment option for patients with ectopically impacted teeth. These cases demonstrate that autotransplantation of ectopically impacted teeth is a viable treatment option rather than implant placement or prosthesis, especially in juvenile patients.