• Archives of Craniofacial Surgery
• /
• v.16 no.2
• /
• pp.96-98
• /
• 2015

Maxillomandibular fractures usually require intermaxillary fixation as a means to immobilize and stabilize the fracture and to re-establish proper occlusion. Arch bars or intermaxillary fixation screws cannot be used for edentulous patients or for patients who have poor dental health. Here, we present a case of repeated intermaxillary fixation failure in a patient weak alveolar rigidity secondary to multiple dental implants. Because single-point fixation screws were not strong enough to maintain proper occlusion, we have used Y-shaped plates to provide more rigid anchoring points for the intermaxillary wires. We suggest that this method should be considered for patients in whom conventional fixation methods are inappropriate or have failed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.36 no.4
• /
• pp.168-172
• /
• 2014

Bilateral coronoid hyperplasia causes painless progressive trismus, resulting from coronoid process impingement on the posterior aspect of the zygomatic bone. The etiology of coronoid hyperplasia is unclear, with various theories proposed. An endocrine stimulus, increased temporalis activity, trauma, genetic inheritance and familial occurrence have all been proposed, but no substantive evidence exists to support any of these hypotheses. Multiplanar reformatting of axial scans and 3-dimensional reconstruction permit precise reproduction of the shape and size of the coronoid and malar structures, and relationships of all structures of the temporal and infratemporal fossae. This case shows remarkably increased mouth opening by coronoidectomy in a patient who complained of trismus due to hyperplasia of coronoid process.

• The Journal of the Korean dental association
• /
• v.15 no.2
• /
• pp.127-132
• /
• 1977

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.36.1-36.5
• /
• 2020

Background: Different genioplasty techniques are applied for the adjustment of chin area deformities such as chin deviation. Results: Thirty patients with simple facial asymmetry due to chin deviation underwent computer-assisted horizontal translational osseous genioplasty. In this technique, a surgical guide was used to cut a bone strip from the side where the chin should be transferred to; then, the same bone strip was used for the filling of the gap that was formed on the opposite side. Conclusion: According to the experience gained from this study, the authors believe that computer-assisted horizontal translational osseous genioplasty is a simple and reliable technique for patients with facial asymmetry due to chin deviation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.195-201
• /
• 2022

Hemimandibulectomy and free fibular flap (FFF) in patients with squamous cell carcinoma could disturb the functional movement of the mandible. The muscular function in the sectioned side was compromised because of the incompetency of the muscle attachment to the mandible, leading to the unstable occlusal contact in the centric and eccentric occlusion. In this report, we present a case of a 63-year-old male who underwent cancer surgery and reconstruction with fibular graft, and he needed a fixed dental prosthesis to restore tooth loss in the anterior region. Occlusal contact change and instability were found according to the bite force in the centric relation and eccentric movement. This case report aimed to present the prosthetic procedure for fabricating the functionally optimized fixed prosthesis wherein the functionally generated path (FGP) technique and digital imaging method were applied to replicate mandibular movement and vertical dimension of the patient.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.2
• /
• pp.138-141
• /
• 2006

Introduction : In recent years, vascularized, i.e., living bone grafts, have been widely applied in the field of oral and maxillofacial surgery, as a method of treatment of congenital or acquired non-unions, and a large defects in mandible. The vascularized fibular graft has been especially used for this purpose because of its shape and mechanical strength. The postoperative hypertrophy of grafted fibula is of particular interest to us. Material and methods : This study was undertaken to determine the volume change(indirect methods) and radiographic appearance of a free vascularized fibular graft as it responds to the mechanical and physiologic features of its new environment. In order to elucidate the long term effect on fibular mass after mandibular reconstruction, change in various method of volume change was utilized as indirect measure of change in long-term. Results : The younger the patient, the more prominent and rapid the hypertrophy of the graft. the hypertrophy of the graft never exceeded the diameter of the recipient bone, except for callus enlargement after stress fracture of the grafted bone. Conclusion : Etiologic explanations for this phenomenon have not been clarified in the previeous literature. some of the factors implicated include a periosteal reaction or new bone formation, as seen at the onset of bone union after a fracture in a child, a reaction to the mechanical loading on the graft and a reaction to the circulatory changes resulting from the grafting procedure.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.4.1-4.4
• /
• 2018

Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.39.1-39.6
• /
• 2016

Background: Temporomandibular joint (TMJ) ankylosis in children often leads to facial deformity, functional deficit, and negative influence of the psychosocial development, which worsens with growth. The treatment of TMJ ankylosis in the pediatric patient is much more challenging than in adults because of a high incidence of recurrence and unfavorable growth of the mandible. Case report: This is a case report describing sequential management of the left TMJ ankylosis resulted from trauma in early childhood. The multiple surgeries including a costochondral graft and gap arthroplasty using interpositional silicone block were performed, but re-ankylosis of the TMJ occurred after surgery. Alloplastic TMJ prosthesis was conducted to prevent another ankylosis, and signs or symptoms of re-ankylosis were not found. Additional reconstruction surgery was performed to compensate mandibular growth after confirming growth completion. During the first 3 years of long-term follow-up, satisfactory functional and esthetic results were observed. Conclusions: This is to review the sequential management for the recurrent TMJ ankylosis in a growing child. Even though proper healing was expected after reconstruction of the left TMJ with costal cartilage graft, additional surgical interventions, including interpositional arthroplasty, were performed due to re-ankylosis of the affected site. In this case, alloplastic prosthesis could be an option to prevent TMJ re-ankylosis for growing pediatric patients with TMJ ankylosis in the beginning.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.6
• /
• pp.586-589
• /
• 2006

Deep circumflex iliac artery (DCIA) flap can be harvested as a composite free flap and is often used to adequately reconstruct wide mandibular defects. However, the harvesting of this DCIA flap can result in severe osseous defect of the donor site causing a morphologic defect in the iliac crest. To reconstruct this defect of the iliac donor site, several innovative techniques using bioactive ceramic spacers, autogenous rib bone, polylactic acid mesh, or titanium plates have been introduced. Nonetheless, these methods have not been widely used due to high cost, secondary donor site morbidity, difficulty of use, and postoperative dissatisfaction. We used two titanium plates to reconstruct the donor iliac site defect at the harvesting time of primary DCIA flap surgery in the 30-year old female with an ameloblastoma in the left mandible. Postoperatively, both iliac sites were relatively balanced and there were few complications. At the 2 years follow-up, there were no specific abnormal radiographic findings and the patient was very satisfied with her esthetic iliac contouring. In our report, we evaluate the effect of two titanium plates on the reconstruction of the iliac donor site in the aspects of esthetics and usefulness. This technique has many advantages, such as reduced cost, simplicity, decreased postoperative pain or discomfort, and improved bilateral balance of both anterior iliac crest contours, especially in young female patients.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.1
• /
• pp.36-42
• /
• 2009

We have developed software for converting the volumetric voxel data obtained from X-ray computed tomography(CT) into computer-aided design(CAD) data. The developed software can used for non-destructive testing and evaluation, reverse engineering, and rapid prototyping, etc. The main algorithms employed in the software are image reconstruction, volume rendering, segmentation, and mesh data generation. The feasibility of the developed software is demonstrated with the CT data of human maxilla and mandible bones.