• Journal of Environmental Policy
• /
• v.12 no.1
• /
• pp.37-58
• /
• 2013

In recently, the low impact development(LID) is discussed at various fields being related to urban stormwater, non-point source pollution, and quality of life. It is understood as an integrated development tool to induce sustainable development with various value-social, economic, and aesthetic. As concerning the development of waterfront area, the low impact development is interested in environmental planning. But the planning process and factors are not considered in precedent research. This study has two purposes. The one is to understand the planning process and factors of low impact development from literature review. The other is to apply the planning factors using case study and to know the effect of low impact development as the simulation plan. The simulation plan is based on some landuse planning. It is divided into the setting the region for environmental protection and the function of public facilities, spatial planning for enlarging permeable area, and spatial planning for circulation of water. The simulation model uses the LIDMOD2. The 14 planning factors of low impact development is applied to case region. And the effect is about 7~10 percent in reduction of nonpoint source pollution and surface runoff.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.7
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.9
• /
• pp.755-764
• /
• 2009

To estimate the pollutant removal efficiency by surface sediment, matter content within surface sediment and its release from the sediment were investigated at 12 sites in the Sihwa constructed wetland. The content of COD, TOC, IL, TN, and TP within sediment varied temporally and spacially, showing ranges of 4.1~7.7 mg/g, 0.29~2.81%, 1.88~8.15%, 0.03~0.35%, 362~1,150 ${\mu}g$/g, respectively. The contents of organic matter and TN were significantly highest in March and decreased towards fall (March${\geq}$May${\geq}$July${\geq}$September, p=0.003 for COD, p=0.001 for TOC, p=0.017 for IL, p=0.015 for TN), whereas TP content was not significant statistically in difference between sampling times. The contents of heavy metals also varied largely with sampling sites and times (As:3.5~3.9 ${\mu}g$/g, Cd:0.08~0.38 ${\mu}g$/g, Cr:51.8~107.0 ${\mu}g$/g, Cu:16.4~81.8 ${\mu}g$/g, Pb:26.~81.8 ${\mu}g$/g, Zn:85~559 ${\mu}g$/g). As compared with sediment quality guideline, the content of organic matter within surface sediment of the Sihwa constructed wetland was classified as unpolluted level. In contrast, the contents of TN, TP and heavy metals were classified as medium or severe pollution state, except some heavy metals (Cu and Pb). From the results of release experiment, TN, Pb, and Zn tend to be removed by surface sediment, but TP, Cd, and Cu have a tendency to released from sediment. Therefore, a relevant plan to improve the removal efficiency of pollutant (especially phosphorus) by surface sediment in the Sihwa constructed wetland is needed.

• Journal of Bio-Environment Control
• /
• v.29 no.1
• /
• pp.89-95
• /
• 2020

Livestock facilities in Korea are on their way of enlargement resulting in increment of livestock manure. When the livestock manure treated inappropriate way during application to the agricultural area, environmental damage can be occurred such as bad smell, water and air pollution. Therefore it is important to make a good management plan for livestock manure treatment. In order to effectively apply organic fertilizer made by livestock manure in terms of quantity and quality, the current status of nutrient in agricultural land should be calculated quantitatively by scientific way. The OECD suggest member countries to calculate the nutrient balance as an agricultural environment indicator which represents the difference between nutrient inputs and outputs of the amount of nutrients in various ways. In this paper, we calculated the nutrient balances according to three cities which have different characteristics such as urban or rural areas. To reduce the nutrient balance, we considered how to reduce the amount of chemical fertilizer by using organic fertilizer made by livestock manure. And public treatment facilities for livestock manure can be a good solution except civil complaints for location selection. Among the options, manure fertilizer application to the agricultural area for cultivation of forage crops was mainly considered to reduce the nutrient balance by decreasing input of chemical fertilizers and increasing output of crop production. Using the field monitoring data, it can be calculated that the daily nitrogen reductions by 116.5 kg/ha and the daily phosphorus increments by 2.7 kg/ha.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.55-61
• /
• 2009

This paper describes a point of production(POP) system which collects and manages real-time shop floor machining information in a wafer dicing process. The system are composed of POP terminal, line controller and network. In the configuration of the system, LAN and RS485 network are used for connection with the upper management system and down stratum respectively. As a bridge between POP terminal and server, a line controller is used. The real-time information which is the base of production management are collected from information resources such as machine, product and worker. The collected information are used for the calculation of optimal cutting condition. The collection of the information includes cutting speed, spout of pure water, accumulated count of cut in process for blade and wafer defect. In order to manage machining information in wafer dicing process, production planning information is delivered to the shop floor, and production result information is collected from the shop floor, delivered to the server and used for managing production plan. From the result of the system application, production progress status, work and non-working hour analysis for each machine, and wafer defect analysis are available, and they are used for quality and productivity improvements in wafer dicing process. A case study is implemented to evaluate the performance of the system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.1
• /
• pp.18-24
• /
• 2007

Paddy fields are apparently nonpoint source pollution and influence water environment. In order to improve water quality in rivers or lakes, to low nutrient load from paddy fields are required. To establish comprehensive plan to control agricultural non-point source pollution, it is imperative to get a quantitative evaluation on pollutants and pollution load from paddy fields. A field monitoring study was carried out to investigate the water balance and losses of nutrients from fields in Sumjin river basin. The size of paddy fields was 115 ha and the fields were irrigated from a pumping station. The observed total nitrogen loads from paddy fields were larger than those of the unit loads determined by Ministry of Environment data (MOE). It is because the nitrogen fertilization level at the studied field was higher than the recommended rate and the high irrigation and subsequent drainage amount. On the contrary, total phosphorus loads were less than those addressed by MOE since phosphorus fertilization level was lower than that of standard level. Therefore, it was found that fertilization, irrigation, and drainage management are key factors to determine nutrient losses from paddy fields. When the runoff losses of nutrients were compared to applied chemical fertilizer, it was found that 42 to 60% of nitrogen lost via runoff while runoff losses of phosphorus account for 1.3 to 7.6% of the total applied amount during the entire year.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.2
• /
• pp.271-277
• /
• 2011

To improve the quality of water from water supply source and to establish the management plan of dead plants in flood control reservoir around Juam Lake, the effect of water quality by dead plant in column with passing time was investigated. In column test, the amounts of release by Carex dimorpholepis were $7,893-7,917mg\;m^{-2}\;month^{-1}$ COD, $2,711-2,816mg\;m^{-2}\;month^{-1}$ T-N and $342-547mg\;m^{-2}\;month^{-1}$ T-P. The amounts of release by Miscanthus sacchariflorus were $6,487-6,507mg\;m^{-2}$ COD, $1,813-1,868mg\;m^{-2}$ T-N and $226-405mg\;m^{-2}\;month^{-1}$ T-P in column. Therefore, the release of COD, T-N and T-P by Carex dimorpholepis were more than those by Miscanthus sacchariflorus Benth in column.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.1
• /
• pp.40-53
• /
• 2021

Research vessels(R/Vs) used for ocean research move to the planned research area and perform ocean observations suitable for the research purpose. The five research vessels of the Korea Institute of Ocean Science & Technology(KIOST) are equipped with global positioning system(GPS), water depth, weather, sea surface layer temperature and salinity measurement equipment that can be observed at all times during cruise. An information platform is required to systematically manage and utilize the data produced through such continuous observation equipment. Therefore, the data flow was defined through a series of business analysis ranging from the research vessel operation plan to observation during the operation of the research vessel, data collection, data processing, data storage, display and service. After creating a functional design for each stage of the business process, KIOST Underway Meteorological & Oceanographic Information System(KUMOS), a Web-Geographic information system (Web-GIS) based information platform, was built. Since the data produced during the cruise of the R/Vs have characteristics of temporal and spatial variability, a quality management system was developed that considered these variabilities. For the systematic management and service of data, the KUMOS integrated Database(DB) was established, and functions such as R/V tracking, data display, search and provision were implemented. The dataset provided by KUMOS consists of cruise report, raw data, Quality Control(QC) flagged data, filtered data, cruise track line data, and data report for each cruise of the R/V. The business processing procedure and system of KUMOS for each function developed through this study are expected to serve as a benchmark for domestic ocean-related institutions and universities that have research vessels capable of continuous observations during cruise.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.699-709
• /
• 2017

We measured the grain size, total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in order to understand the spatial distribution and pollution level of organic matter and metals in surface sediment around Goseong Bay, a shellfish farming area, Korea. The surface sediments were composed of finer sediments such as mud and clay. The concentration of TOC, TN, and heavy metals were much higher in the innermost bay than in the mouth and outside of bay. The spatial distribution of organic matter and heavy metals and C/N ratio (5-10) in sediment showed that the organic matter and heavy metals in sediment of the study region were significantly influenced by oceanic origin organic matter and anthropogenic sources, respectively. Based on the results of four assessment techniques (sediment quality guideline, geoaccumulation index, pollution load index, ecological risk index), the sediments around the Goseong Bay were a little polluted for heavy metals and the high metal concentrations in the northern region of bay could adverse impact on benthic organisms in sediment. Thus, the systematic management plan for the improvement of water and sediment environment and the concentrated monitoring of pollutants for sustainable aquaculture and seafood safety around Goseong Bay are necessary in the future.

• Journal of Korean Society of Forest Science
• /
• v.76 no.3
• /
• pp.243-248
• /
• 1987

The U.S. Forest Service administers the world's largest forestry research organization. From its modest beginning in 1876, some 30 years before the United States national forest system was established, the research branch has devoted its effort to meet current and future information needs of the forestry community of the United States, not just for the U.S. Forest Service. The research branch is one of three major administrative units of the U.S. Forest Service. The others being the National Forest System and State and Private Forestry. Currently the National Forest System comprises 155 national forests, 19 national grasslands, and 18 utilization projects located in 44 states. Puerto Rico, and the Virgin Islands. The National Forest System manages these areas for a large array of uses and benefits including timber, water, forage, wildlife, recreation, minerals, and wilderness. It is through the State and Private Forestry branch that the U.S. Forest Service cooperates and coordinates forestry activities and programs with state and local governments, forest industries, and private landowners. These activities include financial and technical assistance in disease, insect, and fire protection ; plan forestry programs ; improve harvesting and marketing practices ; and transfer forestry research results to user groups. Forestry research is carried out through eight regional Forest Experiment Stations and the Forest Product Laboratory. Studies are maintained at 70 administrative sites, and at 115 experimental forest and grasslands. All of the current sciences that composed modern forestry are included in the research program. These range from forest biology (i. e. silviculture, ecology, physiology, and genetics) to the physical, mathematical, engineering, managerial, and social sciences. The levels of research range from application, developmental, and basic research. Research planning and priority identification is an ongoing process with elements of the research program changing to meet short-term critical information needs(i. e. protection research) to long-term opportunities(i. e. biotechnology). Research planning and priority setting is done in cooperation with National Forest Systems, forest industries, universities, and individual groups such as environmental, wilderness, or wildlife organizations. There is an ongoing review process of research administration, organization, and science content to maintain quality of research. In the U.S. Forest Service the research responsibility is not completed until the new information is being applied by the various user group : I. e. technology transfer program. Research planning and development in the U.S. Forest Service is a dynamic activity. Porgrams for the year 2000 and beyond are now in the planning stage.