• Journal of Korean Society of Transportation
• /
• v.28 no.4
• /
• pp.177-186
• /
• 2010

The principal objective of this paper is to develop road design guidelines, especially for managed lane access spacing between the expressway on-ramp (or off-ramp) and managed lane access point. Managed lanes are typically located in the expressway median and are accessed by weaving across the mainlines. The high level of lane-changing activity present in weaving areas affects capacity significantly. One promising tool for the analysis of lane-changing activity is "gap acceptance theory." This paper estimates the capacity of weaving areas based on the estimated degree of traffic turbulence using gap acceptance theory. The degree of traffic turbulence is represented by a function of the probability that lane-changing vehicles can complete their maneuvers successfully in a given weaving distance. In developing road design guidelines based on the developed gap acceptance model, the minimum managed lane access spacing is determined where the capacity with respect to the managed lane access spacing becomes stable.

• Journal of Construction Engineering and Project Management
• /
• v.7 no.1
• /
• pp.30-36
• /
• 2017

Most local agencies such as counties and small cities continuously express difficulties in making technically and financially defensible decisions on their pavement infrastructure maintenance and rehabilitation. Unlike pavement systems managed by state highway agencies, the total lane-miles of many local pavements are significantly short and they are managed by a limited number of staff who typically have multiple responsibilities. Most local agencies also do not have historical pavement performance data and the lack of a systematic decision making framework exacerbates the problem. A structured framework and an easily accessible decision support tool that reflects their local requirements, practices and operational conditions would greatly assist them in making consistent and defensible decisions. This study fills this gap by developing a systematic pavement treatment selection framework and a spreadsheet based tool for local agencies. It is expected that the proposed framework will significantly help local agencies to improve their pavement asset management practices at the project level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.23-35
• /
• 2017

Work zone traffic control is of keen interest because both traffic operations and safety performances are directly affected by traffic management methods. In particular, work zone traffic on two-lane roads needs to be managed in more efficient and safer manners due to its unique characteristics of alternative right-of-way assignment. This study developed a dynamic control algorithm that can be used for real-time operations of two-lane work zone traffic. The performance of the developed algorithm was evaluated by VISSIM microscopic traffic simulator. An applied programming interface (API) based program was developed to plug-in the control algorithm onto the simulator. The results demonstrated the feasibility of the proposed control algorithm for two-lane work zone.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.4
• /
• pp.136-147
• /
• 2021

Autonomous driving-related technologies are developing step by step by applying the degree of driving. It is essential that operational management technology for roads where autonomous vehicles move should also develop in line with autonomous driving technology. However, in the case of road operation management, it is currently managed using only two-dimensional information, showing limitations in the systematic operation management of lane and facility information and maintenance. This study proposed a plan to construct an operation management system architecture capable of 3D spatial information-based operation management by designing a convergence database that can process real-time big data with high-definition road map data. Through this study, when using a high-definition road map based operation management system for lane and facility maintenance in the future, it is possible to visualize and manage facilities, edit and analyze data of multiple users, link various GIS S/W and efficiently process large scale of real-time data.

• International Journal of Highway Engineering
• /
• v.16 no.1
• /
• pp.99-109
• /
• 2014

PURPOSES : Climbing lanes on expressways managed by the Korea Expressway Corporation (KEC) have been hot potatoes due to conflicts between slow-moving vehicles such as trucks and other vehicles at the merging section as well as the less popularity with the slow-moving vehicles. In order to resolve such problems, KEC has altered existing climbing lanes to passing-type climbing lanes in 1999. The new type of climbing lanes showed an apparent improvement in mobility. For example, the speeds of vehicles using both climbing lane and other lanes improved a lot. However, there has been no clear evidence about improved safety. METHODS : This research effort was initiated to evaluate the safety of the new passing-type climbing lanes using the comparison-group(CG) method based on three-year-long traffic accident data sets before and after the change, respectively. RESULTS : The passing-type climbing lanes showed twice increased traffic accidents even though the traffic accidents on old type climbing lanes increased 1.1% during the same periods. In addition, in-depth study, the merging area of the passing-type climbing lanes was found out to be the weakest section where 43.8% traffic accidents out of total traffic accidents happened. It is noted that the merging area of the old type climbing showed only 25.0% traffic accidents. CONCLUSIONS : The new passing-type climbing lanes were found to be weak in terms of safety when compared with the old type climbing lanes. Especially, the merging area should be improved to reduce the risk of traffic conflicts between slow-moving vehicles and other vehicles.

• International Journal of Highway Engineering
• /
• v.19 no.3
• /
• pp.65-70
• /
• 2017

PURPOSES : Pavement Management System contains the data that describe the condition of the road. Under limited budget, the data can be utilized for efficient plans. The objective of this research is to develop a mixed integer program model that maximizes remaining durable years (or Lane-Kilometer-Years) in road maintenance planning. METHODS : An optimization model based on a mixed integer program is developed. The model selects a cluster of sectors that are adjacent to each other according to the road condition. The model also considers constraints required by the Seoul Metropolitan Facilities Management Corporation. They select two lanes at most not to block the traffic and limit the number of sectors for one-time construction to finish the work in given time. We incorporate variable cost constraints. As the model selects more sectors, the unit cost of the construction becomes smaller. The optimal choice of the number of sectors is implemented using piecewise linear constraints. RESULTS : Data (SPI) collected from Pavement Management System managed by Seoul Metropolitan City are fed into the model. Based on the data and the model, the optimal maintenance plans are established. Some of the optimal plans cannot be generated directly in existing heuristic approach or by human intuition. CONCLUSIONS:The mathematical model using actual data generates the optimal maintenance plans.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.75-82
• /
• 2011

There is the uncertain period of the construction in case of the products meeting the quality standard of KS M 6080, the quality is degraded because of the abrasive loss of the paint caused by vehicle tires as the traffic amount increases and of the loss and detachment of the glass beads providing the retroreflective function. The abrupt degradation of visibility causes the high frequency of traffic accidents at night and increases the traffic accident rate. Additional supplementary construction induces the direct material and construction costs. As the more cost induction effect than the direct cost, the traffic jam caused by the additional construction increases the indirect social costs such as time cost and vehicle cost. Hence, the study is concerned with performing the abrasion resistance test based on the EN 1436 standard to check and improve the quality of various road marking materials resulting in improving the durability of road marking materials. However, even though the difference in the durability lifetime of resins(binders) is bibliographically or theoretically clear, there was no difference in the durability lifetime (retroreflectivity aspect) of the road marking paint using these binders. The reason is that the bonding of beads was very insufficient or that the cross density caused by crack or freshness was low. Moreover, the measured wet retroreflectivity was distributed as the Rw3 or higher class in average on the basis of EN 1436 but was very insufficient on the basis of the minimum wet threshold retroreflectivity with 100mcd/($m^2{\cdot}lx$) managed overseas.

• Journal of Korean Society of Transportation
• /
• v.35 no.2
• /
• pp.160-168
• /
• 2017

In the past 10 years, the accidents caused by drowsy driving have occupied about 23% of all traffic accidents in Korea expressway network and this rate is the highest one among all accident causes. Unlike other types of accidents caused by speeding and distraction to the road, the accidents by drowsy driving should be managed differently because the drowsiness might not be controlled by human's will. To reduce the number of accidents caused by drowsy driving, researchers previously focused on the spot based analysis. However, what we actually need is a segment (link) and occurring time based analysis, rather than spot based analysis. Hence, this research performs initial effort by adapting link concept in terms of drowsy driving on highway. First of all, we analyze the accidents caused by drowsy in historical accident data along with their road environments. Then, links associate with driving time are analyzed using digital tachograph (DTG) data. To carry this out, negative binomial regression models, which are broadly used in the field, including highway safety manual, are used to define the relationship between the number of traffic accidents on expressway and drivers' behavior derived from DTG. From the results, empirical Bayes (EB) and potential for safety improvement (PSI) analysis are performed for potential risk segments of accident caused by drowsy driving on the future. As the result of traffic accidents caused by drowsy driving, the number of the traffic accidents increases with increase in annual average daily traffic (AADT), the proportion of trucks, the amount of DTG data, the average proportion of speeding over 20km/h, the average proportion of deceleration, and the average proportion of sudden lane-changing.