• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.158-166
• /
• 1999

The purpose of this study was to investigate the correlation between airborne total dust and man-made mineral fibers (MMMF), and to estimate total dust concentration to maintain below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV$^{(R)}$) for the MMMF. The regression coefficients between airborne total dust concentrations and fiber concentrations determined in the industries producing glass fibers, rock wool. refractory ceramic and continuous filament glass fibers products were 0.41, 0.42, 0.20 and 0.19, respectively. The size characteristics of fibers as well as the amounts of contaminated non-fibrous dusts could affect the correlation intensities. When total dust and fiber exposure data were compared with the occupational exposure limits, there was a large gap between two evaluation results. The regression coefficient between total dust and fiber data was increased ($r^2=0.88$) in the process of insulation installation generating in the higher levels of glass or rock wool fibers. In this case, an estimated total dust concentration of glass wool or rock wool fibers complying with the ACGIH TLV (1 f/cc) was $1.7mg/m^3$. In conclusion, the total dust and fibers concentrations was highly correlated at the higher exposure levels so that total dust-monitoring data could be used to control simply and economically and to estimate worker's exposure to fibers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.2
• /
• pp.134-139
• /
• 2012

Objectives: This study was conducted to study the analytical variability of A & B counting rules in counting using a phase contrast microscope airborne fibers collected on filters in man-made mineral or vitreous fibers (MMMFs) industries. Methods: Fibers in filters were counted using A & B rules of NIOSH Method 7400. Intra-counter and inter-counter variations by fiber type and density were obtained. The types of MMMFs analyzed were glass wool fiber, rock wool fiber, slag wool fiber, and refractory ceramic fibers. The densities of fibers classified were <20 $fibers/mm^2,$ 20 - <50 $fibers/mm^2$, 50 - <100 $fibers/mm^2,$ and ${\geq}100$ $fibers/mm^2,$ respectively. Results: Intra-counter relative standard deviations by rule A were 0.084, 0.102, 0.071 for glass wool fibers, rock wool fibers and refractory ceramic fibers, and those by rule B were 0.139, 0.120 and 0.142, respectively. Inter-counter relative standard deviations by rule A were 0.281, 0.296, 0.180 for glass wool fibers, rock wool fibers and refractory ceramic fibers, and those by rule B were 0.396, 0.337 and 0.238, respectively. Conclusions: Intra-counter variation was not different significantly among fiber types (p>0.05), but B rule variation for ceramic fibers approximately 2 times greater than corresponding A rule estimates, and intra-counter and inter-counter variations were higher in the low fiber density.

• Journal of Radiation Protection and Research
• /
• v.8 no.2
• /
• pp.8-14
• /
• 1983

The doses to Korean adult by a single and chronic intake of tritiated water are determined using a three compartment model, which describes the retention of tritium radionuclide in body water and in bound organic form in the body. The results show that the total dose of a single intake, using retention half-time for the three-compartment of 9, 30, and 450 days, is 17.64 mrads ($176.4{\mu}Gy$) per 1mCi/kg ($3.7{\times}10^7Bq/kg$) intake, 97% of which is due to tritium in body water and 3% to bound tritium in tissue. In the chronic intake of 1mCi/day($3.7{\times}10^7Bq/day$) tritiated water, the total dose is 85.5 mrad/day(0.855mGy/day). Furthermore, in this study (MPC) a and (MPC)w values of tritium for Korean man are calculated by using the modified formula originated from ICRP Publication-2. From the results, we found that the (MPC) a, w values of ICRP underestimated approximately 50%, the (MPC)a, w values of Korean man must be elevated as high as approximately 50% than that of ICRP.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.04a
• /
• pp.63-69
• /
• 2000

Korea Institute of Geology Mining and Materials(KIGAM) cooperating with Southern Methodist University(SMU) has been operating seismo-acoustic array in Chul-Won area to discriminate man-made explosions from natural earthquakes since at the end of July 1999. In order to characterize propagation parameters of detected seismo-acoustic signal and to associate these signals as a blast event accompanying seismic and acoustic signals simultaneously it is necessary to understand infrasound wave propagation in the atmosphere. Two comparable Effective Sound Velocity Structures(ESVS) in atmosphere were constructed by using empirical model (MSISE90 and HWM93) and by aerological observation data of Korea Meteorological Administration (KMA) at O-San area. Infrasound propagation path computed by empirical model resulted in rare arival of refracted waves on ground less than 200km from source region. On the other hand Propagation paths by KMA more realistic data had various arrivals at near source region and well agreement with analyzed seismo-acoustic signals from Chul-Won data. And infrasound propagation in specific direction was very influenced by horizontal wind component in that direction. Linear travel time curve drawn up by 9 days data of the KMA in autumn season showed 335.6m/s apparent sound velocity in near source region. The propagation characteristics will be used to associate seismo-acoustic signals and to calculate propagation parameters of infrasound wave front.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.195-197
• /
• 2007

This paper presents experimental results on the safety of persons due to a ground fault in 22.9 kV-Y distribution system In order to evaluate the touch voltages due to internal ground faults in a step down transformer based on the newly prescribed KS C IEC 60364 standard series, the verification tests in a 22.9 kV multi-grounded neutral system were carried out From the experimental results, it was found that there will be significant potential rise jeopardizing LV equipment insulation in case of separate grounding between HV and LV system and the effective measures against hazardous touch voltages due to a IN side ground fault in the common grounding system between HV and LV system are proposed. As a consequence, it was found that the equipotential bonding is an important prerequisite for the effectiveness of the protective measures for the safety of persons in the common ground system between 22.9 kV-Y and low-voltage grounding system.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.251-255
• /
• 2008

We have developed an electronic aids, called SmartWand, which can help visually impaired people walk safely and tell them an object's color and environmental brightness SmartWand can inform visually impaired people of the dangerous obstacles around which they can't notice by the white cane such as a large panel with supporting poles on the street. Especially we have lmproved the previous version of SmartWand by reflecting the result of user study.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.335-339
• /
• 2009

The purpose of this study is to propose a new Haptic Dial System (HDS) for Virtual Prototyping by developing upgraded systems and various Haptic effects. The Haptic Effect Design (HED) which gives users sensations like handling actual products has a function of controlling loudness by force and changing Haptic effects on GUI windows in real-time. In addition, the HED has another function of editing intervals to express Haptic effects as graphical force and notch on windows. Many kind of dial knob can be attached and removed easily for testing the performance of actual product designs. The HDS can be remotecontrolled through giving and taking the information between motor part and GUI part with TCP communication. The HDS can be applied to the output devices of Haptic effects as well as input-interfaces.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.295-300
• /
• 2009

This paper presents a context-aware information service system in public places that have complex processes, for the disabled and the elderly. The system infers context of a user which is derived from the user's demand, then it informs to the user -what to do, where to go-according to the context. Our system gets user's context from sensor data and informations from the local information system. The system provides more suitable information with a knowledge model, which organizes location and process data coordinately. The information is provided personally to the user, with mobile devices.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.4
• /
• pp.217-225
• /
• 1994

With the purpose of improving the therapeutic index of $[^3H]$ acyclovir (ACV) in the treatment of chronic hepatitis B infection, asialofetuin (AF) which after selective interaction with Ashwell's receptor specifically enters into hepatocytes, was chosen as a carrier system for hepatic targeting. This drug was first converted to its monophosphate (ACVMP), which was subsequently activated by water soluble carbodiimide to conjugate with ${\varepsilon}-NH_2$ groups of Iysine residues of AF. The molar ratio of ACVMP to AF in the conjugate was 3.9. In rats, elimination of ACVMP-AF conjugate after i.v. injection showed two phase elimination kinetics. Initial apparent elimination rate constant in rats was $0.191\;min^{-1}$ which was greater than that of ACV. The elimination rate constant from terminal phase was $0.021\;min^{-1}$. Area under the total radioactivities versus time curve was found to be several times larger in liver than in other organs (spleen, intestine, lung and kidney) after i.v. administration of the conjugate labelled in the drug moiety. The above results suggested that ACVMP-AF conjugate was rapidly taken up by hepatocytes and could be a useful hepatic targeting system.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.439-446
• /
• 2011

Frequency is an important operating parameter for the protection, control, and stability of a power system. Thus, it must be maintained very close to its nominal frequency. Due to the sudden change in generation and loads or faults in a power system, however, frequency deviates from its nominal value. An accurate monitoring of the power frequency is essential for optimum operation and prevention of wide area blackout. Most conventional frequency estimation schemes are based on the DFT filter. In these schemes, the gain error could cause defects when the frequency deviates from the nominal value. We present an advanced frequency estimation technique using gain compensation to enhance the DFT filter-based technique. The proposed technique can reduce the gain error caused when the frequency deviates from the nominal value. Simulation studies are performed using both the data from EMTP-RV software and the user-defined arbitrary signals to demonstrate the effectiveness of the proposed algorithm. Results show that the proposed algorithm achieves good performance under both steady state tests and dynamic conditions.