• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.98-107
• /
• 2020

Objective: The aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions. Methods: Transverse skeletal parameters and posterior tooth inclinations were evaluated using cone beam computed tomography images, and occlusal force as well as contact area were assessed using pressure-sensitive films in 124 normodivergent adults. A linear mixed model was used to cluster posterior teeth into maxillary premolar, maxillary molar, mandibular premolar, and mandibular molar groups. Differences among Class I, II, and III groups were compared using an analysis of variance test and least significant difference post-hoc test. Correlations of posterior dental inclinations to occlusal function were analyzed using Pearson's correlation analysis. Results: In male subjects, maxillary premolars and molars had the smallest inclinations in the Class II group while maxillary molars had the greatest inclinations in the Class III group. In female subjects, maxillary molars had the smallest inclinations in the Class II group, while maxillary premolars and molars had the greatest inclinations in the Class III group. Occlusal force and contact area were not significantly different among Class I, II, and III groups. Conclusions: Premolar and molar inclinations showed compensatory inclinations to overcome anteroposterior skeletal discrepancy in the Class II and III groups; however, their occlusal force and contact area were similar to those of Class I group. In subjects with normodivergent facial patterns, although posterior tooth inclinations may vary, difference in occlusal function may be clinically insignificant in adults with Class I, II, and III malocclusions.

• The korean journal of orthodontics
• /
• v.46 no.5
• /
• pp.280-289
• /
• 2016

Objective: The aim of this study was to analyze tooth movement and arch width changes in maxillary dentition following nonextraction treatment with orthodontic mini-implant (OMI) anchorage in Class II division 1 malocclusions. Methods: Seventeen adult patients diagnosed with Angle's Class II division 1 malocclusion were treated by nonextraction with OMIs as anchorage for distalization of whole maxillary dentition. Three-dimensional virtual maxillary models were superimposed with the best-fit method at the pretreatment and post-treatment stages. Linear, angular, and arch width variables were measured using Rapidform 2006 software, and analyzed by the paired t -test. Results: All maxillary teeth showed statistically significant movement posteriorly (p < 0.05). There were no significant changes in the vertical position of the maxillary teeth, except that the second molars were extruded (0.86 mm, p < 0.01). The maxillary first and second molars were rotated distal-in ($4.5^{\circ}$, p < 0.001; $3.0^{\circ}$, p < 0.05, respectively). The intersecond molar width increased slightly (0.1 mm, p > 0.05) and the intercanine, interfirst premolar, intersecond premolar, and interfirst molar widths increased significantly (2.2 mm, p < 0.01; 2.2 mm, p < 0.05; 1.9 mm, p < 0.01; 2.0 mm, p < 0.01; respectively). Conclusions: Nonextraction treatment with OMI anchorage for Class II division 1 malocclusions could retract the whole maxillary dentition to achieve a Class I canine and molar relationship without a change in the vertical position of the teeth; however, the second molars were significantly extruded. Simultaneously, the maxillary arch was shown to be expanded with distal-in rotation of the molars.

• The korean journal of orthodontics
• /
• v.51 no.6
• /
• pp.407-418
• /
• 2021

Objective: To investigate differences in the heritability of skeletodental characteristics between twin pairs with skeletal Class I and Class II malocclusions. Methods: Forty Korean adult twin pairs were divided into Class I (C-I) group (0° ≤ angle between point A, nasion, and point B [ANB]) ≤ 4°; mean age, 40.7 years) and Class II (C-II) group (ANB > 4°; mean age, 43.0 years). Each group comprised 14 monozygotic and 6 dizygotic twin pairs. Thirty-three cephalometric variables were measured using lateral cephalograms and were categorized as the anteroposterior, vertical, dental, mandible, and cranial base characteristics. The ACE model was used to calculate heritability (A > 0.7, high heritability). Thereafter, principal component analysis (PCA) was performed. Results: Twin pairs in C-I group exhibited high heritability values in the facial anteroposterior characteristics, inclination of the maxillary and mandibular incisors, mandibular body length, and cranial base angles. Twin pairs in C-II group showed high heritability values in vertical facial height, ramus height, effective mandibular length, and cranial base length. PCA extracted eight components with 88.3% in the C-I group and seven components with 91.0% cumulative explanation in the C-II group. Conclusions: Differences in the heritability of skeletodental characteristics between twin pairs with skeletal Class I and II malocclusions might provide valuable information for growth prediction and treatment planning.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.135-145
• /
• 2000

It is well known that there are different craniofacial skeletal groups in the same malocclusion types. The present study was performed to determine morphologic sub-groups in Korean children with Class III malocclusions, and to find out morphological differences between subgroups by means of a cross-sectional longitudinal cephalometric study. In this study, 135 children aged 6 to 14 year-old with untreated Class III malocclusions were selected. The samples were divided into two groups depending on the angulation of middle cranial fossa (MCF). That is, when the MCF of an individual was measured smaller than 40.3, he/she was tossed into mandibular protrusive-effect group(MREG), while when an individual was measured larger than 40.3, he/she was tossed into mandibular retrusive-effect group(MREG). Thereafter, the grouped samples were divided into 4 age groups(7, 9, 11 and 13 year-old). Thirty four linear and angular measurements on the tracings of lateral cephaloradiographs were measured, and the morphological characteristics and differences were compared and analysed by means of Wilcoxon test. It was found that Korean children with Class III malocclusions were divided into two groups, in which 39.3% were belonged in the MREG and 60.7% were in the MREG. In the MREG, anterior-posterior length of cranial base, nasomaxillary complex, maxilla and mandible were larger than the MREG. And although there was no difference in the total length of mandible (Co-Gn), mandibular body length (Go-Gn) was larger in the MREG during the majority of the observed periods. These results would suggest that a majority of the samples, 60.7%, demonstrated many of configurations of craniofacial skeletal relationships that can be found in the leptoprosopic faceform.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.599-612
• /
• 2007

The present study was designed to compare the morphological and structural differences of craniofacial structures among 146 children with Class I and Class III malocclusions. The results below were obtained from the study. 1. Sphenoethmoidal synchondrosis continues to grow later in Class III. 2. Anteroposterior length of the nasomaxillary complex was significantly shorter in Class III, but the height of the nasomaxillary complex was similar. 3. Mandibular length and mandibular body length were longer in Class III, but had no statistical significance. Lower anterior facial height was shorter in Class III, but had no statistical significance. 4. Dentoalveolar height was similar between Class I and Class III. 5. In Class I, anterior cranial base took part in the anteroposterior length of the nasomaxillary complex and the mandible. 6. In Class III, anterior cranial base and middle cranial base had higher correlation with the mandible with aging. These results suggest that there exist a little differences between Class I and Class III malocclusions at age $7{\sim}11$, but growth patterns are mostly similar. Therefore it is necessary to correct Class III malocclusions at an early age before skeletal differences appear.

• The korean journal of orthodontics
• /
• v.19 no.1 s.27
• /
• pp.153-167
• /
• 1989

This study was undertaken to analyze the growth of mandible in surgically repaired unilateral cleft lip and palate. The subjects consisted of 63 unilateral cleft lip and palate individuals, 60 class III malocclusions and 60 normal occlusions ranging from 6 to 15 years old. Each group was divided into two age groups. (6-10 Y and 11-15 Y) The results obtained from UCLP compared with other groups were as follows: 1. The anteroposterior position of the chin was similar to that of the normal occlusions. 2. The shape of the mandible was similar to that of the class III malocclusions. 3. In mandibular size, ramus height was the smallest among three groups, but body length and overall mandibular length were similar to those of the normal occlusions. 4. The lower border of the mandible was the steepest among three groups and strong vertical or clockwise growth tendency was indicated. 5. The position of condyle in relation to the cranial base showed little difference in three groups. 6. In older age group , vertical growth tendency of the mandible decreased more or less.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.907-915
• /
• 2000

The movement of teeth and initial stress associated with the treatment of orthodontics have been successfully studied using the finite element method. To reduce the effort in preprocessing of finite element analysis, we developed two types of three-dimensional finite element models based on the standard teeth model. Individual malocclusions were incorporated in the finite element The movement of teeth and initial stress associated with the treatment of orthodontics have been successfully studied using the finite element method. To reduce the effort in preprocessing of finite element analysis, we developed two types of three-dimensional finite element models based on the standard teeth model. Individual malocclusions were incorporated in the finite element models by considering the measuring factors such as angulation, crown inclination, rotation and translations. The finite element analysis for the wire activation with a T-loop arch wire was carried out. Mechanical behavior on the movement and the initial stress for the malocclusion finite element model was shown to agree with the objectives of the actual treatment. Finite element models and procedures of analysis developed in this study would be suitably utilized for the design of initial shape of the wire and determination of activation displacements.

• The korean journal of orthodontics
• /
• v.41 no.2
• /
• pp.127-137
• /
• 2011

Objective: The aim of the study was to compare the opening and protrusive mandibular movements between Class I and Class II malocclusions in healthy adolescents by clinical and axiographic evaluations. Methods: Mechanical axiography was performed on non-orthodontically treated, temporomandibular disorder (TMD)-free adolescents (12 - 16 years) with Class I (n = 38, 16 boys, 22 girls) or Class II (n = 40, 19 boys, 21 girls) malocclusion. Opening and protrusive movements were measured clinically and axiographically. Intergroup comparisons were evaluated by t-tests. Results: In opening movement, the maximum clinical opening capacity was significantly different (p ${\leq}$ 0.05) between the groups. In protrusive movement, the Class II group had significantly greater maximum clinical protrusion (p < 0.001) and maximum axiographic protrusive length (p < 0.01) than the Class I group. No significant difference in the other opening and protrusive axiographic measurements was observed. Conclusions: TMD-free adolescents with Class II malocclusion have increased protrusive capacity compared with TMD-free adolescents with Class I malocclusion; however, the detected differences could be normal variations during adolescence.

• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.159-168
• /
• 1992

To predict eruptive path of maxillary canine, 13 male and 11 female malocclusions were longitudinally studied for 4 years. And to study frequency and distribution of impaction of maxillary canine, 1500 malocclusions were studied. The path, velocity and duration of maxillary canine eruption were determined by periodic angular and linear measurement using periodic orthopantomograms and cephalograms. The following results were obtained. 1. Maxillary canine was erupted with $14.5^{\circ}$ distal tipping from initial stage $98.1^{\circ}$ to final stage $83.6^{\circ}$ of axial inclination on orthopantomogram. 2. Eruptive velocity of maxillary canine was fastest on stage 4, and mean eruptive velocity was 10.5mm per year on stage 4. 3. Eruption of maxillary canine was completed 12 year 5 months in male and 11 years 8 months in female. 4. To predict the duration for eruption completion by position of maxillary canine on cephalogram, regression equation was obtained. 5. Frequency of impaction of maxillary canine was 1.47% in malocclusion and more frequent in male. Distribution of buccal and palatal, right and left impaction was no different, but unilateral impaction was more frequent.

• The korean journal of orthodontics
• /
• v.15 no.1
• /
• pp.75-84
• /
• 1985

By observing the correlationships between the characteristics of the facial pattern and the methods of establishing the position of the lower central incisor to the five reference lines on the lateral roentgenocephalograms, the author tried to find the most useful method of them, the criteria of which were the independence of a variation according to facial patterns, the close relationships with soft tissue and lip balance, and the simple and consistent usefulness in clinical practice. The subject consisted of forty normal occlusions, forty class II div I malocclusions, forty class III malocclusions, ten treated claas II div 1 cases and ten treated class III cases, all were in 14-17 yrs of age. The findings of this study are as follows: 1. The position of the lower central incisor to EP, OP, MP and NB showed variations according to ANB, FMA, facial convexity and Holdaway angle. 2. The position of the lower central incise. to AP line (A-Pog) was not co..elated with ANB, FMA, facial convexity and Holdaway angle, so it can be used consistently, regardlesss of the facial pattern. 9. The lineal position of the incisal edge of the lower central incisor to AP line has a profound influence on harmonious soft tissue and lip balance.