• 폴리머
• /
• 제30권4호
• /
• pp.318-325
• /
• 2006

아미노 실란이 도입된 기능성 클레이를 제조하고, 이를 폴리프로필렌과 상용화제인 무수 말레인산이 그래프트 중합된 폴리프로필렌과 함께 용융 혼합법으로 공유 결합이 형성된 폴리프로필렌/클레이 나노복합체를 제조하였다. 아미노 실란으로 개질된 클레이의 구조 및 표면 특성은 각각 엑스선 회절 분석, 적외선 분광 분석, 그리고 고체상태 핵자기 공명 분석 결과를 통해 확인하였다. 아미노 실란을 이용한 클레이의 개질은 약 $19.8{\AA}$ 의 실리케이트 층간 거리를 증가시켰으며, 클레이 층상에 존재하는 히드록시기의 $3650cm^{-1}$ 에 존재하는 피크의 강도가 약해지는 것을 확인하였으며, 아민 그룹이 치환된 Si를 의미하는 -69 ppm 부근의 시그널도 확인하였다.

• 폴리머
• /
• 제29권3호
• /
• pp.248-252
• /
• 2005

다양한 조성을 갖는 폴리프로필렌(PP)/몬모릴로나이트(MMT) 나노복합체를 이축압출기를 이용하여 용융혼합 법으로 제조하였다. 본 연구에서는 MMT의 박리를 위하여 MAH-g-PP를 상용화제로 사용하였고, 제조된 나노복합체를 X-ray 회절(X-ray diffraction, XRD)과 투과전자현미경(Transmission Electron Microscope, TEM)을 통해 MMT가 박리된 것을 확인하였다. PP/MMT 나노복합체의 제조에 사용한 MMT는 난연제와 상승효과를 발휘하여 난연제의 양을 절반가까이 줄였을 경우에도 우수한 난연효과를 나타내었다. PP/MMT 나노복합체는 순수 PP보다 기계적 물성과 열적 물성이 증가하였고, 난연성은 UL 94 V-0로 매우 우수하였다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제16권2호
• /
• pp.145-151
• /
• 2012

In the present work, we studied the structure-activity relationship (SAR) of tautomycetin (TMC) and its derivatives. Further, we demonstrated the correlation between the immunosuppressive fuction, anticancer activity and protein phosphatase type 1 (PP1) inhibition of TMC and its derivatives. We have prepared some TMC derivatives via combinatorial biosynthesis, isolation from fermentation broth or chemical degradation of TMC. We found that the immunosuppressive activity was correlated with anticancer activity for TMC and its analog compounds, indicating that TMC may home at the same targets for its immunosuppressive and anticancer activities. Interestingly, TMC-F1, TMC-D1 and TMC-D2 all retained significant, albeit reduced PP1 inhibitory activity compared to TMC. However, only TMC-D2 showed immunosuppressive and anticancer activities in studies carried out in cell lines. Moreover, TMC-Chain did not show any significant inhibitory activity towards PP1 but showed strong growth inhibitory effect. This observation implicates that the maleic anhydride moiety of TMC is critical for its phosphatase inhibitory activity whereas the C1-C18 moiety of TMC is essential for the inhibition of tumor cell proliferation. Furthermore, we measured $in$ $vivo$ phosphatase activities of PP1 in MCF-7 cell extracts treated with TMC and its related compounds, and the results indicate that the cytotoxicity of TMC doesn't correlate with its $in$ $vivo$ PP1 inhibition activity. Taken together, our study suggests that the immunosuppressive and anticancer activities of TMC are not due to the inhibition of PP1. Our results provide a novel insight for the elucidation of the underlying molecular mechanisms of TMC's important biological functions.

• The Korean Journal of Physiology
• /
• 제9권1호
• /
• pp.1-11
• /
• 1975

The present experiments were carried out to investigate the active center of sodium and potassium ion activated adenosine triphosphatase. An ATPase, activated by sodium ion Plus potassium ion in the presence of magnesium ion, and inhibited by ouabain, has been obtained from rabbit red cell ghosts. The ATPase activity was measured by inorganie phosphate released from ATP. From this values of the measured inorganic phosphate, the activity of ATPase was calculated. The following results were observed. 1. The activity of $(Na^++K^+)-ATPase$ is inhibited by ouabain. This effect may not be due to an effect on sulfhydryl groups, amino groups, carboxyl groups, imidazole groups and hydroxyl groups. 2. The $(Na^++K^+)$-activated enzyme system is inhibited by p-chloromercuribenzoate and by d nitroflurobenzene, and this effect may be due to an effect on sulfhydryl groups. These results indicate that the sulfhydryl groups is attached to sodium-potassium dependent adenosine triphosphate, an aspect of the pump. 3. The $(Na^++K^+)-activated$ enzyme system is inhibited by maleic anhydride and this inhibition is reversed by lysine. This Seems to indicate that the active center of this enzyme is the amino groups. 4. The $(Na^++K^+)$-activated enzyme system is inhibited by iodoacetamide and this inhibition is reversed by the simultaneous present of cysteine and aspartic acid in the suspension medium. This result indicates that this enzyme contains sulfhydryl groups and carboxyl groups. 5. The $(Na^++K^+)-ATPase$ activity is accelerated by adrenaline and this effect is abolished by aspartic acid. This effect of aspartic acid indicate that carboxyl group might be involved in the hydrolysis of ATP by the enzyme system. On the hydrolysis of ATP by the enzyme system. On the basis of these experiments it f·as suggested that the active center of $(Na^++K^+)-activated$ ATPase contains sulfhydryl groups, amino groups and carboxyl groups.

• 접착 및 계면
• /
• 제10권1호
• /
• pp.23-29
• /
• 2009

두 종류의 천연섬유, 즉 면섬유와 목분을 이용하여 제조한 폴리프로필렌 - 천연섬유 복합재료의 혼합가공시 유변학적 특성과 열적특성에 미치는 상용화제의 영향을 고찰하였다. 상용화제로는 무수말레인산이 그래프팅된 폴리프로필렌 공중합체를 사용하였다. 천연섬유의 종류에 관계없이 상용화제를 첨가할 때, 전반적으로 상용화제의 함량이 증가함에 따라 토오크 값이 상승함이 확인되었다. 또한, 시차 주사 열량계(DSC)와 X선 회절분석(XRD)을 통해 상용화제의 첨가시 복합재료의 결정화도가 약간 상승함이 확인되었다. 섬유의 종류에 따른 영향은 거의 관찰되지 않았으나, 혼합시 유변학적 물성, DSC 및 XRD 결과에 의하면, 면섬유의 경우가 목분보다는 PP-g-MAH와 더 나은 상호작용을 보이는 것으로 생각된다.

• 폴리머
• /
• 제25권3호
• /
• pp.441-449
• /
• 2001

폴리페닐렌 에테르(PPE)/폴리아미드(PA)를 근간으로 하는 블렌드를 상용화하기 위하여 부타디엔 고무에 스티렌이 그라프트된 공중합체 (g-BS)를 합성하고 여기에 폴리아미드의 말단기인 아민기와 반응성이 높은 무수말레인산기를 그라프트시킨 g-BS*를 도입하여 블렌드의 형태학과 기계적 성질의 변화를 조사하고 상용화제로서의 성능을 평가하였다. 폴리아미드 연속상에 분산되어 있는 PPE상의 크기와 이에 따른 기계적 성질의 변화는 사용된 g-BS의 구조와 관능기의 함량과 밀접한 관계를 나타내었다. 블렌드의 내열성과 내충격성의 균형을 위하여 g-BS성분을 PPE상에 내재시키는 것이 중요하고, 이러한 상구조의 형성은 g-BS에 포함된 폴리스티렌의 함량과 분자량이 적절하게 유지될 때 가능하였다. 고무함량과 그라프트된 폴리스티렌의 분자량이 일정하게 고정된 상태에서, g-BS*에 존재하는 무수말레인산의 함량이 낮거나, 고무입자의 크기가 커질 경우에는 연속상과 분산상의 계면 보강이 효과적으로 이루어지지 못하여 기계적 성질이 저하되었다. 본 연구에서 적용한 g-BS*를 사용하면, 폴리페닐렌 에테르에 관능기를 도입하여 상용화하는 기존의 방법과 동등한 정도의 물성이 달성될 수 있으며, 자연 색상이 보다 우수한 수지의 제조가 가능함을 확인하였다.

• Macromolecular Research
• /
• 제14권2호
• /
• pp.179-186
• /
• 2006

In the present work, low density polyethylene (LDPE)/aliphatic polyester (APES)/organoclay ternary nanocomposites were prepared. In particular, the effect of a compatibilizer, polyethylene-graft-maleic anhydride (PE-g-MAH), on the morphology and properties of the ternary nanocomposites was investigated. LDPE/APES/organoclay nanocomposites were prepared through melt intercalation method using two different kinds of organoclay. The dispersibility of silicate clays in the nanocomposites was investigated by X-ray diffraction and atomic force microscopy. The ternary nanocomposites showed higher tensile properties than the LDPE/APES blend did. The dispersibility and properties of nanocomposites containing Cloisite 30B were better than those of the nanocomposites containing Cloisite 20A. Unlike Cloisite 20A, hydroxyl groups in the intercalants in Cloisite 30B interlayer underwent a certain polar interaction with the carboxyl group of APES, favoring the intercalation of APES chains and the formation of LDPE/APES/Closite 30B nanocomposites. However, the introduction of the polar hydroxyl groups also enhanced the interaction with the silicate surface at the same time, thereby rendering somewhat difficult the replacement of the surface contacts by LDPE chains, and impeding the extensive intercalation and further exfoliation of Cloisite 30B in the LDPE/APES matrix. The compatibilizer enhanced the intercalation of the polymer chain inside the clay gallery and thus improved the mechanical properties of the ternary nanocomposites. Rheological measurements of the nanocomposites via frequency sweep experiment indicated a certain interaction between the clay platelet and the polymer molecules in the melted state.

• 청정기술
• /
• 제10권4호
• /
• pp.195-201
• /
• 2004

기능성 고분자와 셀룰라아제가 화학적으로 결합된 수식 셀룰라아제를 이용하여 폐신문용지(Old Newsprint, ONP)의 탈묵공정에 적용하였다. 수식 셀룰라아제 중의 셀룰라아제는 섬유의 피브릴화(fibrillation)를 촉진시켜 잉크입자의 박리를 향상시켰으며, 수식 셀룰라아제 중의 수식 고분자가 탈묵공정에서 분리된 잉크입자를 부상제거하는 새로운 탈묵 공정이 완성되었다. 수식 셀룰라아제를 이용한 공정은 극소량의 수식 셀룰라아제의 사용으로 인장강도, 백감도(brightness), 백색도(whiteness)를 포함한 물리적 성질을 기존 탈묵공정에서의 그것보다 향상시켰다. 잉크와 섬유의 결합은 저장 기간이 증가함에 따라 더욱 강해지고, 기존의 방법으로는 잉크입자 제거가 어려운 반면, 수식 셀룰라아제를 이용한 공정은 잉크입자 제거에 매우 탁월한 효과를 나타내었고, 약 1년간의 보존 기간을 가진 폐신문용지의 탈묵 효과를 41% 향상시켰다. 또한 이 공정은 황변현상을 제거했으며, 섬유의 피브릴화를 촉진시켜 재생지의 물리적 성질인 인장강도와 내부결합도를 향상시켰다.

• 한국염색가공학회지
• /
• 제27권3호
• /
• pp.175-183
• /
• 2015

Weight loss treatment of a fiber leads an improvement of its handle and drape properties. Hydrolysis of a fiber is commonly known as a method to reduce its weight of 5-40%. Most of the studies on the weight loss treatment are mainly based on polyester fibers and there has been almost no study on the weight reduction of nylon fibers. In this study, however, in order to develop a use of nylon 6 fiber for the industrial applications such as toothbrush, underwear, carpet and more, weight loss treatment of a nylon 6 fiber was carried out. Under various treatment conditions, morphological analysis were done to observe the change in the structure of the surface and analysis. From the observation of formic acid treated nylon 6 fiber, there were many etched and deformed morphologies. Thermal and crystalline properties were analyzed to find the changes in the crystal structure caused by the weight loss treatment. There were little differences in the crystalline properties of nylon 6 fiber by formic acid treatment. Tensile strength of nylon 6 fiber decreases with acid concentration. The FITR peak intensity of the amide bond decreases with formic acid concentration.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.76-86
• /
• 1998

Effects of processing variables and MAPP (maleic anhydride polypropylene) coupling agent on the properties of composite were discussed for turbulent-air-mixed woodfiber-polypropylenefiber composites. In this research, density, composition ratio, and mat moisture content were established as processing variables, and emulsified MAPP prepared by direct pressure method was incorporated as the coupling agent. And the turbulent air mixer, which was improved in function through alteration of our previous fiber mixer, was used to mix wood fibers and polypropylene fibers. At the addition level of 1% MAPP, based on oven-dried wood fiber weight, woodfiber-polypropylenefiber composites generally showed enhanced the physical and mechanical properties. And composites with low to medium densities of 0.6 to 0.8g/$cm^3$ greatly increased in these property values than with high densities of 1.0g/$cm^3$ or more by adding 1 % MAPP. Thus, MAPP addition was thought to be an effective way of enhancing properties for nonwoven web composites. At the mat moisture contents of 5 to 20%, however, the physical and mechanical properties were not enhanced by adding 1% MAPP. In the composites containing 15% polypropylene fibers, the lowest thickness swelling and water absorption values were observed at the 1% MAPP level. The addition of more than 1% MAPP had the adverse effect on the physical and mechanical properties of composites.