• Journal of Ubiquitous Convergence Technology
• /
• 제1권1호
• /
• pp.9-17
• /
• 2007

Feature based stereo matching is an effective way to perform 3D building reconstruction. However, in urban scene, the cluttered background and various building structures may interfere with the performance of building reconstruction. In this paper, we propose a novel method to robustly reconstruct buildings on the basis of rectangle regions. Firstly, we propose a multi-scale linear feature detector to obtain the salient line segments on the object contours. Secondly, candidate rectangle regions are extracted from the salient line segments based on their local information. Thirdly, stereo matching is performed with the list of matching line segments, which are boundary edges of the corresponding rectangles from the left and right image. Experimental results demonstrate that the proposed method can achieve better accuracy on the reconstructed result than pixel-level stereo matching.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.131-134
• /
• 2009

We have developed a flexible OTFT backplane in which all the dielectrics are formed by solutionprocess in order to achieve low-cost and highthroughput manufacturing. The backplane successfully drives a flexible AM-OLED display with peak brightness of > 200 nit and the contrast ratio of > 1000:1 with great mechanical flexibility.

• 국제초고층학회논문집
• /
• 제2권2호
• /
• pp.115-121
• /
• 2013

The ventilation performance of a street in Bangkok, Thailand, was investigated by performing measurements and conducting a CFD analysis. We focused on a street that was covered by an elevated train station. It was shown that the ventilation efficiency varied drastically depending on the angle between the street and the wind direction. When the wind direction was parallel to the street, the elevated structure had a negative influence, which created higher pollutant concentrations than in locations without elevated structures. However, when the wind direction was perpendicular to the street, the pollutant concentrations in the two situations were similar. Using a CFD analysis and ventilation performance indexes, it was shown that the elevated structure directed the wind flow and enhanced the ventilation efficiency, which positively affected ventilation performance. These kinds of knowledge can lead us to optimize city planning including high-rise buildings with high ventilation efficiency.

• 국제초고층학회논문집
• /
• 제2권2호
• /
• pp.97-104
• /
• 2013

Recently, the demand for Building Information Modeling (BIM) construction drawings and specifications has increased rapidly. Many countries have also started to implement BIM. The BIM implementation can change the design flow of buildings including high-rise buildings. Against this background, many companies are focusing on the development of BIM software. BIM involves a three-dimensional CAD program that can examine the placement of ductwork and machinery. It significantly increases the efficiency of a mechanical design through data unification using standard Industry Foundation Classes (IFC). In addition, BIM functions as a database to simplify the use of simulation technology for designing air-conditioning systems. To further develop BIM, it is important to know the expectations of mechanical engineers who will become frequent users of BIM in the future. A survey was conducted among Japanese mechanical engineers using a questionnaire to analyze the expectations of mechanical design using BIM. The results show that many respondents strongly recognize BIM as a three-dimensional CAD program. However they also expect that BIM can help the optimization of their design works and enhance design functionality by running simulations utilizing BIM.

• 천문학논총
• /
• 제30권2호
• /
• pp.121-123
• /
• 2015

We report our measurements of the trigonometric distance and proper motion of IRAS 20056+3350, obtained from the annual parallax of $H_2O$ masers. Our distance of $D=4.69^{+0.65}_{-0.51}kpc$, which is 2.8 times larger than the near kinematic distance adopted in the literature, places IRAS 20056+3350 at the leading tip of the Local arm and proximal to the Solar circle. We estimated the proper motion of IRAS 20056+3350 to be (${\mu}_{\alpha}cos{\delta}$, ${\mu}_{\delta}$) = ($-2.62{\pm}0.33$, $-5.65{\pm}0.52$) $mas\;yr^{-1}$ from the group motion of $H_2O$ masers, and use our results to estimate the angular velocity of Galactic rotation at the Galactocentric distance of the Sun, ${\Omega}_0=29.75{\pm}2.29km\;s^{-1}kpc^{-1}$, which is consistent with the values obtained for other tangent points and Solar circle objects.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.32-37
• /
• 2007

This paper proposes a dual-mode ultra precision positioning system for machine tools and measuring machines. The objective was to position a machine table with a picometer order of resolution, i.e., pico-positioning. A twist-roller friction drive (TFD) was used in coarse-mode positioning. The TFD, which was driven by an AC servomotor, is a kind of lead screw in mechanical terms, and several centimeters of machine table movement was controlled with a nanometer order of positioning resolution. To eliminate lateral vibration caused by the TFD, an active aerostatic coupling driven by piezoelectric actuators was inserted between the TFD and the machine table. This active aerostatic coupling was also applied as a feed drive device for fine-mode positioning; in the fine mode, the positioning resolution was 50 pm. Factors influencing pico-positioning, such as how noise from displacement sensors and vibrations in the aerostatic guideway affect positioning resolution, are discussed.

• 한국조경학회:학술대회논문집
• /
• 한국조경학회 2007년도 Journal of Landscape Architecture in Asia Vol.3
• /
• pp.151-156
• /
• 2007

The Eight Scenery, as a traditional landscape to today, gradually caught the concern of landscape scholars, as well became the mutual cultural wealth of South Korea, China and Japan even of the whole Asia. The Yanjing Eight Scenery firstly originated from the Jin dynasty is an important representation of Eight Scenery culture in Scenic Spots and Historical Sites of China. The transition process of Yanjing Eight Scenery is examined in this thesis, and the cause of such change is also analyzed. Moreover, the landscape content of Yanjing Eight Scenery is classified in detail, and the succession of the landscape architecture of the Yanjing Eight Scenery style under the traditional culture is analyzed from the aspects of rebuilding pavilion, landscape arrangement, building, and new landscape architecture rebuilt followed the religious, the plant landscape and the traditional culture based on the classification. Beijing regional culture has influenced Yanjing Eight Scenery by its classification, the landscape evaluation, and the analysis of the landscape feature, in addition, this paper searches for the model to research the Eight Scenery culture in each country of Asia.

• 패션비즈니스
• /
• 제23권2호
• /
• pp.48-61
• /
• 2019

The objective of this study was to derive a list of creative thinking techniques applied with the requirements of the appropriate technique for the task of fashion design development among the process of fashion product planning. This was done through the analysis of thinking techniques by the type of thinking and idea method. Also, the study presented how each creative thinking technique derived is applied to the task of developing fashion design. The scope of the study was 'Fashion Design Development Task', which corresponds to the design sketch of a fashion item based on the seasonal design concept derived through the fashion design planning stage. Research on the thinking techniques consisted largely of the process of idea thinking, the elements of creative thinking, the patterns and types of thinking. Four studies by Makoto, Michalko, De Bono, and Cox suggesting that the patterns and types of thinking techniques were analyzed for the purpose of this study as empirical studies through FGI of a group of five fashion experts. The analysis results showed that the thinking techniques suitable for the development of fashion design were derived from the technique of fractionation, attributive listing, scamper, morphological analysis, mind mapping, lotus blossom, pattern language, provocative operation, and forced connection. In particular, it can be confirmed that the scamper was treated as an efficient and practical technique in the many studies.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 추계학술발표대회
• /
• pp.634-637
• /
• 2013

개인정보 영향평가(이하 PIA)는 시스템을 가동하기 전에 미리 개인정보 제공자의 프라이버시에 미치는 영향을 평가하여 프라이버시 침해 위험을 감소시키는 평가방법이다. 일본에서는 민간 기업이 중심이 되어 PIA를 실시해왔으며, PIA 보급을 위한 지침과 위험도 평가 방법을 개발하여 유효성 평가에 관한 연구가 이루어지고 있다. 본 발표에서는 일본의 PIA실시 현황과 2016년부터 공공기관에 의무화 될 예정인 마이 넘버(My Number) 제도에 대한 PIA에 관해 발표하겠다.

• 한국주조공학회지
• /
• 제42권1호
• /
• pp.61-66
• /
• 2022

Hydraulic units are important components of agricultural and construction machinery, and thus require high-quality castings. However, gas defects occurring inside the sand cores of the castings due to the resin used is a problem. This study therefore aimed to develop a casting simulation method that can clarify the gas defect positions. Gas defects are thought to be caused by gas generated after the molten metal fills up the mold cavity. The gas constant is the most effective factor for simulating this gas generated from sand cores. It is calculated by gas generating temperature and analysis of composition in the inert gas atmosphere modified according to the mold filling conditions of molten metal. It is assumed that gases generated from the inside of castings remain if the following formula is established. [Time of occurrence of gas generation] + [Time of occurrence of gas floating] > [Time of occurrence of casting surface solidification] The possibility of gas defects is evaluated by the time of occurrence of gas generation and gas floating calculated using the gas constant. The residual position of generated gases is decided by the closed loops indicating the final solidification location in the casting simulation. The above procedure enables us to suggest suitable casting designs with zero gas defects, without the need to repeat casting tests.