• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1991년도 춘계학술대회논문집; 한국해사기술연구소, 대전; 1 Jun. 1991
• /
• pp.31-39
• /
• 1991

When predicting shipboard noise levels, the accuracy depends largely on the value of the structureborne noise transmission loss. Although empirical formulars are frequently used because of their simplicities, researches on the analytical methods to estimate the transmission loss of structureborne noise such as wave guide theory and SEA has long been one of the major topics in shipboard acoustics to overcome the inherent limitations of empirical ones. This paper describes an application of SEA to predict the transmission loss of the structurebornenoise of a simple ship-like structural model consisted of 22 flat plates. The result shows that discrepancies between experimental and theoretical transmission losses are less than 3 dB.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2009년도 학술발표회 초록집
• /
• pp.2184-2189
• /
• 2009

China is one of the countries in which flood occurs most frequently in the world and with the current economic growth; flood disaster causes more and more economic losses. Chinese government pays more attention to flood monitoring and assessment by space technology. Since1983, NOAA(AVHRR), Landsat-TM, LANDSAT-ETM+, JERS-1, SPOT, ERS-2, Radarsat-1, CBERS-1, Envisat have been used for flood monitoring and assessment. Due to the bad weather conditions during flood, microwave remote sensing is the major tools for flood monitoring. Envisat is one of the best satellite with powerful SAR. Its application for flood monitoring has been studied and its near real time(NRT) application can be realized on the basis of real-time delivery of image. During the 2005, 2006 and 2007 flood seasons, over the 31 NRT flood monitoring based on Envisat, had been carried out in Yangtze, Songua, Huaihe, pearl river basin. The result shows that Envisat SAR is very useful data source for flood disaster monitoring and assessment.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.341-344
• /
• 2005

Mobile IPv6(MIPv6) allows a Mobile Node to talk directly to its peers while retaining the ability to move around and change the currently used IP address. One of the major issues regarding the basic Mobile IPv6 protocol is related to the handover management of a mobile node. This paper proposes efficient approach for adaptation of MIPv6 sing context information in roaming environments. To investigate on a efficient and secure handover procedure, proposed approach method will give us the following advantages: (l)the intention of context is to reduce latency, packet losses and avoid re-initiation of signaling to and from mobile nodes,(2) FMIPv6 aims to reduce handover latency due to IP protocol operations as small as possible in comparison to the inevitable link switching latency.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.301-304
• /
• 2002

The EPIC model was applied to assess the environmental impacts of two contrasting tillage systems (conventional versus ridge tillage). The model was calibrated with field data and validated with another set of data. The errors between the 12-year predicted and observed means or medians were less than 10% for nearly all of the environmental indicators, with the major exception of a nearly 44% over prediction of the N surface runoff loss for Watershed 2. The predicted N leaching rates, N losses in surface runoff, and sediment loss clearly showed that EPIC was able to simulate the long-term impacts of tillage and residue cover on these processes.

• 산업공학
• /
• 제16권2호
• /
• pp.248-257
• /
• 2003

In a heated rolling process of a steel mill where steel plates are pressed to a sheet coil by spreading and expanding, an irregularly-shaped head portion as well as a tail portion of the sheet coil need to be cropped. Any crop which is not clearly cut and separated from the sheet coil may cause critical damages to the facilities of the following processes. As the cropping process is performed very fast, human eyes are not proper for continuous monitoring of the cropping process. To solve this problem, we have developed a machine-vision based crop-drop detection system. The system also measures lengths of major and minor axes for the crops and thereby determines the proper crop size to minimize steel sheet losses.

• Advances in Energy Research
• /
• 제4권2호
• /
• pp.163-176
• /
• 2016

Rapid depletion of fossil based oil, coal and gas reserves and its greater demand day by day necessitates the search for other alternatives. Severe environmental impacts caused by the fossil fire based power plants and the escalating fuel costs are the major challenges faced by the electricity supply industry. Integration of Distributed Generators (DG) especially, wind and solar systems to the grid has been steadily increasing due to the concern of clean environment. This paper focuses on a new simple and fast load flow algorithm named Backward Forward Sweep Algorithm (BFSA) for finding the voltage profile and power losses with the integration of various sizes of DG at different locations. Genetic Algorithm (GA) based BFSA is adopted in finding the optimal location and sizing of DG to attain an improved voltage profile and considerable reduced power loss. Simulation results show that the proposed algorithm is more efficient in finding the optimal location and sizing of DG in 15-bus radial distribution system (RDS).The authenticity of the placement of optimized DG is assured with other DG placement techniques.

• Wind and Structures
• /
• 제13권2호
• /
• pp.207-220
• /
• 2010

The 'chain reaction' effect of the interaction between wind pressure and windborne debris is likely to be a major cause of damage to residential buildings during severe wind events. The current paper (Part II) concerns the quantification of such pressure-debris interaction in an advanced vulnerability model that integrates the debris risk model developed in Part I and a component-based wind-pressure damage model. This vulnerability model may be applied to predict the cumulative wind damage during the passage of particular hurricanes, to estimate annual hurricane losses, or to conduct system reliability analysis for residential developments, with the effect of windborne debris fully considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.660-662
• /
• 2001

This paper describes the problems generated with the use of PWM ASDs with induction motors. The major effect of harmonic voltages and currents in induction motors is increased the heating due to iron and copper losses at harmonic frequencies. The harmonic components thus affect the motor efficiency and developed the torque. In order to investigate the effect of harmonics which is caused by using of nonlinear load at the low voltage system, we set up simple load system and measured the voltage and current. Measurement results show that additional operation of induction motor at the parallel bus in using nonlinear load such as ASD is helpful to the reduction of harmonic current.

• 천문학회지
• /
• 제24권1호
• /
• pp.95-105
• /
• 1991

In the presence of synchrotron losses, diffusion of an ensembel of relativistic particles in an intraculster medium is investigated. The diffusion coefficient in the medium is found to be constrained by $28.8\;{\pm}\;0.4\;{\leq}\;Log\;D\;{\leq}\;30.5\;{\pm}\;0.4\;cm^2s^{-1}$ with the energy dependency of $D_0{\varepsilon}^{\mu}$ of ${\mu}=0.4{\pm}0.2$ as the previous observations suggested. As an important implication of the result, the brightest head-tail radio source NGC 4869, whose radio tail structure is indicative for its orbit within the cluster core, is considered to be the major contributor of particles for the formation of the Coma radio halo.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권12호
• /
• pp.573-577
• /
• 2002

We designed wideband HTS antennas which consists of two triangle -radiation patches using a $YBa_2Cu_3O_{7-X}$ (YBCO) superconducting thin film. The major limitation of high-Tc superconducting (HTS) microstrip antennas is the narrow bandwidth due to the high Q and thin substrate. Defining bandwidth as the frequency range over which standing wave ratio (SWR) 2:1 or less, HTS antenna bandwidths are typically 0.85 % to 1.1 %. Thus considerable effort has been focused on developing antennas for broadband operation. To calculate input impedance and design of the broadband HTS antennas a moment method technique was used. The HTS antenna fabricated in this work was designed for K-band, which is useful band for satellite to satellite communications. The bandwidth obtained was a significant 6.7 % and the other measured performance of our HTS antenna, including the bandwidth, radiation Pattern, efficiency, standing wave ratio (SWR) and return losses was reported.