• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.4
• /
• pp.361-368
• /
• 1998

Acid rainwater samples were collected during 4 years from 1992 in Pusan area nearby seaside. Ionic composition of early and succeeding rainwater were investigated to identify emission sources. pH and Electronic Conductivity of samples were measured immediately after sampling. Major ion concentrations of rain samples were Na+, Ca2+, Mg2+, K+, NH4+, SO42-, NO3-, Cl- which were analyzed by ion Chromatography. 55% of early rainwater and 90% of succeeding rainwater were identified below pH 5.6. Because, Na+, K+, Ca2+ were washed mostly in early rainwater, as a result, pH values were increased by increasing rainfall amounts. It was studied that pH value was varied from ambient ion component, rainfall, and rain intensity. From the principal component analysis result, the dominant components of acid rainwater were Na+, K2+, Mg2+, Ca2+, the elements were contributed soil and marine source, the second components nuts -SO42-, SO4a-, NO3-, nuts -Ca2+ originated from man - made source.

• Journal of Korean Society on Water Environment
• /
• v.23 no.2
• /
• pp.222-227
• /
• 2007

The adsorption features of fluoride ion on the oyster shell have been investigated for the purpose of the employment of waste oyster shell as an adsorbent for the treatment of fluoride ion-containing wastewater. The major component of oyster shell was examined to be Ca with minor components of Na, Si, Mg, Al, and Fe. As the initial concentration of fluoride ion was raised, its absorbed amount was enhanced at equilibrium, however, the adsorption ratio of fluoride ion compared with its initial concentration was shown to be decreased. Also, adsorption of fluoride ion onto the oyster shell resulted in the formation of $CaF_2$ in the morphological structure of adsorbent. Kinetic analysis showed that the adsorption reaction of fluoride ion generally followed a second order reaction with decreasing rate constant with the initial concentration of adsorbate. Freundlich model agreed well with the adsorption behavior of fluoride ion at equilibrium and the adsorption reaction of fluoride ion was examined to be endothermic. Several thermodynamic parameters for the adsorption reaction were calculated based on thermodynamic equations and the activation energy for the adsorption of fluoride ion onto oyster shell was estimated to be ca. 13.589 kJ/mole.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.2
• /
• pp.179-184
• /
• 1995

This study was carried out to characterize sources of suspended particulate matter(SPM) in Mt. Soback area from January to Novembver in 1993. The collection and major water soluble ion analysis of SPM were conducted by using a High Volumn Air Sampler(HVAS; W&A Inc., PM-10) and ion chromatograph(DIONEX 4000i), respectively. The variations of SPM and major ion concentrations were found to be 9. sim. 156.mu.g/ $m^{3}$, $F^{-10}$ 0.00 .sim. 0.15.mu.g/ $m^{3}$, C $l^{-10}$ 0.06 .sim. 3.79.mu.g/ $m^{3}$, N $O_{3}$$^{-10}$ 0.90 .sim. 6.85.mu.g/ $m^{3}$, S $O_{4}$$^{2-}$ 1.99 .sim. 9.36.mu.g/ $m^{3}$ N $a^{+}$0.00 .sim. 0.27.mu.g/ $m^{3}$, N $H_{4}$ $^{+}$0.72 .sim. 5.77.mu.g/ $m^{3}$, $k^{+}$0.03 .sim. 0.88.mu.g/ $m^{3}$ and $Ca^{2+}$0.12 .sim. 2.76.mu.g/ $m^{3}$. Tree sources were identified by Principal Component Amalysis(PCA) using a SPSS/P $C^{+}$. The explanation ability of forst, second and third Principal Component were 60.8%, 13.6%, 8.2%, of total variance. The sources classfied by PCA were found to be secondary aerosol/fuel combustion, soil dust related cement production/yellow sand and aerosol related waste burning.related waste burning.g.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.6
• /
• pp.589-598
• /
• 1998

This study was conducted to investigate the chemical characteristics of Precipitation at Seoul, Yangpyong, Hongchon and Inje in the central part of Korean peninsula during the period from March 1994 to November 1997. The precipitation samples were collected by automatic wet-only sampler. The samples were analyzed for major anions (SO42-, NO3-, Cl-, F-) and cations(NH4+, Ca2+, Mg+, Na+, K+), in addition to acidity and electrical conductivity. The analytical instrument for water soluble ionic components was ion chromatography. The volume - weighted mean PH were 4.73, 4.87, 4.89 and 4.81 at Seoul, Yangpyong, Hongchon and Inje, respectively. The sums of cation concentrations was slightly greater than the sums of anion concentrations. Also, the highest ion component was SO42- in anions and NH4+ in cations. The mean equivalent ratios of SO42- to NO3- were found by 2.96, 2.71, 2.43 and 2.25 at Seoul, Yangpyong, Hongchon and Inje, respectively. The factor analysis was conducted in order to make the large and diverse data set as manageable levels and to qualitatively examine the relationship between the variables. It showed that major sources of pollutants in precipitation were from the anthropogenic in Seoul, the natural in Hongchon, and the anthropogenic and natural in Yangpyong and Inje.

• Environmental Engineering Research
• /
• v.15 no.2
• /
• pp.93-98
• /
• 2010

This study aims to determine the chemical composition and seasonal variation of atmospheric acid deposition in order to identify possible sources contributing to precipitation. Sampling and analysis of 132 wet deposition samples were carried out from January to December 2008 at Mae Hia Research Center, Chiang Mai University, Chiang Mai Province. Total precipitation was 1,286.7 mm. Mean electro-conductivity and pH values were 0.94 mS/m and 6.27, respectively. Major cations ($Na^+$, ${NH_4}^+$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) and major anions ($HCOO^-$, $CH_3COO^-$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$) were determined by Ion Chromatography. The relative volume weight mean concentrations of anions, in descending order, were ${SO_4}^{2-}$ > ${NO_3}^-$ > $Cl^-$ > $CH_3COO^-$ > $HCOO^-$ and those of cations were $NH_4^+$ > $Ca^{2+}$ > $Mg^{2+}$ > $K^{+}$ > $Na^+$. Results of a principle component analysis highlighted the influence of various possible sources of ions such as agricultural activity, fuel combustion, marine sources, soil resuspension, and biomass burning.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.83-91
• /
• 2005

Pyrolysis-mass spectrometry has been used to characterize the 17 biological materials including bacteria and proteins. In this study, an in situ thermal-hydrolysis methylation(THM) procedure using tetramethylammonium hydroxide(TMAH) was employed. The biological materials are ionized using chemical ionization(CI) method with ethanol by ion trap mass spectrometer(ITMS), which attached with our own made pyrolyzer module, and then their pyrolysis mass spectra were obtained. The major distinct characteristic peaks were selected from all the range of mass spectra, and analyzed using principal component analysis(PCA) method to assess the classification/identification possibility of biological materials.

• Journal of Environmental Health Sciences
• /
• v.36 no.1
• /
• pp.61-71
• /
• 2010

Intensive measurements of airborne respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were conducted in the downtown area of Iksan city. The $PM_{2.5}$ and $PM_{2.5}$ samples were collected twice a day in the Iksan city of Korea from October 17 to November 1, 2004. The purpose of the study was to determine the inorganic water-soluble components and trace elements of $PM_{2.5}$ and $PM_{2.5}$ in the atmospheric environment and estimate the contribution rate of major chemical components from a mass balance of all measured particulate species. The chemical analysis for PM samples was conducted for water-soluble inorganic ions using ion chromatography and trace elements using PIXE analysis. The mean concentrations of respirable $PM_{2.5}$ and inhalable $PM_{2.5}$ were $51.4{\pm}29.7$ and $79.5{\pm}39.6\;{\mu}g/m^3$, respectively, and the ratio was 0.62. The ion species of $NO_3$, $SO_4^2$, and $NH_4^+$ were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These components predominated in respirable $PM_{2.5}$ fraction, while $Na^+$, $Mg^{2+}$, $Ca^{2+}$ mostly existed in coarse particle mode. Elemental components of S, Cl, K, and Si were abundant in both $PM_{2.5}$ and $PM_{2.5}$. These elements, except for Si, were considered to be emitted from anthropogenic sources, while Si, Al, Fe, Ca existed mainly in coarse particle mode and were considered to be emitted from crustal materials. The averaged mass balance analysis showed that ammonium nitrate, ammonium sulfate, crustal component, and other trace elements were composed of 18.4%, 13.2%, 4.8%, 3.5% for PM2.5 and 17.0%, 11.6%, 13.7%, 4.4% for $PM_{2.5}$, respectively.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.47-56
• /
• 2008

pH and Eh were measured at 25 points in the abandoned Dalcheon mine. And, major ion components $(Na^+,\;K^+,\;Ca^{2+},\;Mg^{2+},\;Cl^-,\;SO_4^{2-},\;CO_3^{2-},\;HCO_3^-)$ were analyzed through groundwater sampling at 41 points. pH and Eh were measured the highest concentration in serpentinite area. And, pH was between weak alkaline and intermediate values in study area. Groundwater in study area was dominated oxidation-reduction environment caused by reaction with carbonate rock. Because sulfur components contained in carbonate, serpentinite, arsenopyrite and pyrite was dissolved by groundwater, $SO_4^{2-}$ component was high in study area. And $Ca^{2+},\;Mg^{2+}$ of cations were high. Correlation coefficients of ion components in tailing dumps were 0.95 between $Ca^{2+}\;and\;SO_4^{2-}$, 0.86 between $Ca^{2+}\;and\;Mg^{2+}$, 0.85 between $Mg^{2+}\;and\;SO_4^{2-}$. Correlation coefficients of ion components in bedrock were 0.86 between $Mg^{2+}\;and\;SO_4^{2-}$, 0.68 between $Ca^{2+}\;and\;SO_4^{2-}$. Concentration range of $Ca^{2+}$ in tailing dumps was $6.85{\sim}323.58mg/L,\;and\;3.18{\sim}207.20mg/L$ in bedrock. Concentration range of $SO_4^{2-}$ in tailing dumps was $21.54{\sim}1673.17mg/L,\;and\;2.04{\sim}1024.64mg/L$ in bedrock. By the result of Piper diagram analysis with aquifer material, groundwater in tailing dumps was $Ca-SO_4$ type. Groundwater quality types with bedrock material were Mg-$SO_4$ and Mg-$HCO_3$ types in serpentinite area, Ca-$HCO_3$ type in carbonate area, Na-K and $CO_3+HCO_3$ types in hornfels, respectively. As a result of this study, groundwater in tailing dumps were dissolved $Ca^{2+},\;Mg^{2+}\;and\;SO_4^{2-}$ components with high concentration. Also, these ion components were transported into bedrock aquifer.

• Microbiology and Biotechnology Letters
• /
• v.18 no.4
• /
• pp.338-343
• /
• 1990

MB4-03, an $\alpha$-amylase inhibitor was isolated from the culture broth of Streptomyces sp. DMCJ-49 and purified through ion-exchange chromatography, adsorption, and gel filtration. The results of various instrumental analyses showed that the inhibitor was one of oligosaccharides that had glucoses as its major component and that its molecular weight was about 2000. And one methyl group which seemed to be related with the inhibitory activity of this compound was identified. From the CMR spectrum, it was elucidated that this compound was composed of $\alpha$ -D-glucopyranoses which were linked together by $\alpha$ (I -, 4) bond configuration. As the inhibitory effect of this compound was reduced after incubation with $\beta$-amylase, the maltose units was seemed to exist at non-reducing terminal side of it.

• Journal of Environmental Health Sciences
• /
• v.48 no.2
• /
• pp.66-74
• /
• 2022

Background: The health effects of particulate matter (PM_2.5) bonded with various harmful chemicals differ based on their composition, so investigating and managing their concentrations and composition is vital for long-term management. As industrial complexes emit considerable quantities of pollutants, higher PM_2.5 concentrations and chemical component effects are expected than in other places. Objectives: We investigated the concentration distribution ratios of PM_2.5 chemical components to provide basic data to inform future major emissions control and PM_2.5 reduction measures in industrial complexes. Methods: We monitored five sites near the Ansan and Siheung industrial complexes from August 2020 to July 2021. Samples were collected and analyzed twice per week in spring/winter and once per week in summer/autumn according to the National Institute of Environmental Research in the Ministry of Environments' Air Pollution Monitoring Network Installation and Operation Guidelines. We investigated and compared composition ratios of 29 ions, carbon, and elemental components in PM_2.5. Results: The analysis of PM_2.5 components at the five sites revealed that ion components accounted for the greatest total mass at approximately 50% while carbon components and elemental components contributed 23~28% and 8~10%, respectively. Among the ionic components, NO₃^- occupies the greatest proportion. OC occupies the greatest proportion of the carbon components and sulphur occupies the greatest proportion of elemental components. Conclusions: This study investigated the concentration distribution ratios of PM_2.5 chemical components in industrial complexes. We believe these results provide basic chemical component concentration ratio data for establishing future air management policies and plans for the Ansan and Siheung industrial complexes.