• 한국지반환경공학회 논문집
• /
• 제9권4호
• /
• pp.47-52
• /
• 2008

본 연구는 안동지역에 소재하는 안동 임하호 저니토가 호소수에 미치는 영향을 조사하기 위하여 안동호와 임하호 6개 지역에서 채취한 저니토의 토양성분과 중금속 용출 특성을 분석하였다. 대부분의 저니토는 illite(I), kaolinite(Ka), quartz(Q) 및 feldspar(F)로 구성되어 있다. 저니토에 포함된 중금속 중 아연(Zn), 비소(As), 크롬(Cr), 구리(Cu), 납(Pb)의 농도는 임하호에 비하여 안동호에서 상대적으로 높게 나타났다. 특히 안동호의 저니토에서는 다른 중금속들에 비해 비소(As)와 아연(Zn)의 용출이 크게 나타났다. 저니토를 이용한 흡착실험에서는 아연(Zn), 카드늄(Cd) 및 구리(Cu)의 흡착은 적게 일어난 반면 납(Pb)과 크롬(Cr)은 높은 흡착력을 보여주었다.

• 대한화학회지
• /
• 제35권6호
• /
• pp.645-652
• /
• 1991

몇 가지 전이금속이온(Co(Ⅱ), Ni(Ⅱ), Cu(Ⅱ), Zn(Ⅱ)) 및 후전이금속이온(Cd(Ⅱ), Hg(Ⅱ), Pb(Ⅱ))과 $N_2O_3$계 거대고리 리간드인 1,15-diaza-3,4 : 12,13-dibenzo-5,8,11-trioxacyclooctadecane 사이에 형성되는 착물의 안정도 상수를 수용액에서 전위차 적정법으로 결정하였다. 각 착물의 안정도 상수$(logK_f)$는 $25^{\circ}$C에서 Co(Ⅱ): 3.83, Ni(Ⅱ) : 4.56, Cu(Ⅱ) : 7.74, Zn(Ⅱ) : 4.98, Cd(Ⅱ) : 3.91, Hg(II) : 14.87, Pb(Ⅱ) : 6.65이었다. 전이금속착물의 안정도 순위는 Williams-Irving 서열인 Co(Ⅱ) < Ni(Ⅱ) < Cu(Ⅱ) < Zn(Ⅱ)와 일치하였고, 후전이금속착물의 안정도는 Cd(Ⅱ) < Pb(Ⅱ) < Hg(Ⅱ)이 순위이었다. 한편 메탄올 용액에서 자외-가시선이온과 리간드가 1:1인 조성을 가졌으나, Ni(Ⅱ), 착물은 1:1과 1:2 두 가지 조성을 가질 수 있음을 알았으며, 또 디메틸술폭시드 용액에서 $^1H-$와 $^{13}C-$핵자기공명스펙트럼을 분석하여 후전이금속이온 착물은 주로 리간드의 질소원자가 결합에 기여함을 알았다. Cu(Ⅱ)와 Zn(Ⅱ)이 고체착물은 원소분석, 전기전도도, 자화율 측정, 자외-가시선 및 적외선 스펙트럼분석 등으로 Cu(Ⅱ) 착물은 일그러진 팔면체, 그리고 Zn(Ⅱ) 착물은 사면체 구조를 이루고 있는 것으로 예측되었다.

• 한국식품과학회지
• /
• 제21권3호
• /
• pp.391-398
• /
• 1989

Capillary column GLC를 사용하여 트리글리세리드를 분리하고 분리된 각 peak를 GC/MS의 selected ion monitoring 분석을 통하여 동정하는 트리글리세리드 분자종 분석방법의 적용 타당성을 검토하기 위하여 표준 트리글리세리드 및 옥수수유, 홍화유, 면실유의 트리글리세리드를 시료로 하며 실험하였다. 그 결과 시료유 트리글리세리드는 capillary column GLC(65% methylphenylsilicone)상에서 acyl기의 총탄소수별 및 이중결합수에 따라 분리되고, acyl기의 총탄소수와 이중결합수가 같을 경우는 구성 지방산의 극성차에 따라 분리되는 특성을 보였다. 그리고 분리된 각 분자종 peak의 동정을 위해 트리글리세리드의 GC/MS상의 질량 spectrum중 $RCO^+$와 $[M-OCOR]^+$를 선택차여 사용하였는데, 시료별 트리글리세리드의 주요 분자종은 옥수수유의 경우 OLL, LLL, SLL, PLL, PLO이었고, 홍화유의 경우는 LLL, OLL, PLL이었고, 면실유의 경우는 PLL, PLO, SOO, OLL이었다.

• 한국분말재료학회지
• /
• 제30권4호
• /
• pp.324-331
• /
• 2023

Lithium (Li) is a key resource driving the rapid growth of the electric vehicle industry globally, with demand and prices continually on the rise. To address the limited reserves of major lithium sources such as rock and brine, research is underway on seawater Li extraction using electrodialysis and Li-ion selective membranes. Lithium lanthanum titanate (LLTO), an oxide solid electrolyte for all-solid-state batteries, is a promising Li-ion selective membrane. An important factor in enhancing its performance is employing the powder synthesis process. In this study, the LLTO powder is prepared using two synthesis methods: sol-gel reaction (SGR) and solid-state reaction (SSR). Additionally, the powder size and uniformity are compared, which are indices related to membrane performance. X-ray diffraction and scanning electron microscopy are employed for determining characterization, with crystallite size analysis through the full width at half maximum parameter for the powders prepared using the two synthetic methods. The findings reveal that the powder SGR-synthesized powder exhibits smaller and more uniform characteristics (0.68 times smaller crystal size) than its SSR counterpart. This discovery lays the groundwork for optimizing the powder manufacturing process of LLTO membranes, making them more suitable for various applications, including manufacturing high-performance membranes or mass production of membranes.

• Asian Journal of Atmospheric Environment
• /
• 제10권4호
• /
• pp.208-216
• /
• 2016

This paper reports the results of a field evaluation which used sampling and analytical methods to determine the levels of airborne hexavalent chromium Cr(VI) in major industrial complexes in Korea over a seven year period (2007-2013). Cr(VI) concentrations were determined using cellulose filter sampling and ion chromatography analysis. In order to validate the analytical performance of these methods, studies were also carried out to investigate data quality control (QC) parameters, such as the method detection limit (MDL), repeatability, and recovery efficiencies. The average concentrations of Cr(VI) for the nine industrial complexes in Korea were in the range of 0.09 to $1.40ng/m^3$, which is similar to of the concentrations in other industrial areas around the world. The impacts of Cr(VI) emissions from industrial areas on Cr(VI) concentrations in neighboring-residential areas were considerably low, and the dispersion of Cr(VI) from industrial areas to residential areas was estimated to be 'not-significant'. Cr(VI) levels were not affected by seasonal variation, which suggests that chromium was emitted continuously from the industrial sources throughout the year. The concentration of Cr(VI) measured accounted for 0.7 to 9.4 percent of the total chromium level, which is a low percentage compared to those in other urban areas around the world. This is the first report in an international journal of a field study conducted in Korea to determine the concentration of Cr(VI) in the ambient air of industrial and residential areas.

• 한국대기환경학회지
• /
• 제34권5호
• /
• pp.639-650
• /
• 2018

Identification of the major sources contributing to PM is of importance in order to understand their quantitative contributions to atmosphere. In the viewpoint of the meat cooking in Korea, only a few analyses of organic molecular markers have been conducted due to analytical difficulties. In this study, ten different parts of meat (i.e., blade shoulder, belly, and arm shoulder of pork; ribeye roll, top blade muscle, and short plate of beef; leg quarter, breast, and wing of chicken; duck; mackerel) were pyrolyzed to generate the cooked PM using an electronic heating plate. Generated PM were collected by the pyrolysis sampling system to identify total carbon (TC) using a carbon analyzer and cholesterol using a Liquid chromatography tandem-mass spectrometry (LC-MSMS) based on fragmentor voltage (FV), precursor ion, collision energy, product ion. In addition, oxydative potential (OP) analysis using dithiothreitol (DTT) method were discussed to investigate the toxicity relates. Highly correlated pairwise scatterplots between the cholesterol and TC indicate that oxydative potential was highly associated with different parts of meat. This study provides insight into the meat cooking components of PM, which could be drivers of the oxidative potential relates.

• Carbon letters
• /
• 제10권2호
• /
• pp.114-122
• /
• 2009

Crushed, depitted peach stones were impregnated activated with 50% $H_3PO_4$ followed by pyrolysis at $500^{\circ}C$. Two activated carbons were produced, one under its own evolved gases during pyrolysis, and the second conducted with air flow throughout the carbonization stage. Physicochemical properties were investigated by several procedures; carbon yield, ash content, elemental chemical analysis, TG/DTG and FTIR spectra. Porosity characteristics were determined by the conventional $N_2$ adsorption at 77 K, and data analyzed to get the major texture parameters of surface area and pore volume. Highly developed activated carbons were obtained, essentially microporous, with slight effect of air on the porous structure. Oxygen was observed to be markedly incorporated in the carbon matrix during the air treatment process. Cation exchange capacity towards Cu (II) and Cd (II) was tested in batch single ion experimental mode, which proved to be slow and a function of carbon dose, time and initial ion concentration. Copper was up taken more favorably than cadmium, under same conditions, and adsorption of both cations was remarkably enhanced as a consequence of the air treatment procedure. Sequestration of the metal ions was explained on basis of the combined effect of the oxygen functional groups and the phosphorous-containing compounds; both contributing to the total surface acidity character.

• 분석과학
• /
• 제30권6호
• /
• pp.379-389
• /
• 2017

In this study, we set up an analytical method that can be used for rapid and accurate determination of representative isoquinoline alkaloids in medicinal plants using UPLC-ESI-Q-TOF MS (ultra pressure liquid chromatography-electrospray ionization-quadrupole-time-of-flight mass spectrometry). The compounds were eluted on a C18 column with 0.1 % formic acid and acetonitrile, and separated with good resolution within 13 min. Each of the separated components was characterized by precursor ions (generated by ESI-Q-TOF) and fragment ions (produced by collision-induced dissociation, CID), which were used as a reliable database. We also performed method validation: analytes showed excellent linearity ($R^2$, 0.9971-0.9996), LOD (5-25 ng/mL), LOQ (17-82 ng/mL), accuracy (91.6-97.4 %) as well as intra- and inter-day precisions (RSD, 1.8-3.2 %). In the analysis of Chelidonium majus L., magnoflorine, coptisine, sanguinarine, berberine and palmatine were detected by matching retention times and characteristic fragment ion patterns of reference standards. We also confirmed that, among the quantified components, coptisine was present in the highest quantity. Furthermore, alkaloid profiling was carried out by analyzing the fragment ion patterns corresponding to peaks of unknown components. In this manner, protopine, chelidonine, stylopine, dihydroberberine, canadine, and nitidine were tentatively identified. We also proposed the molecular structure of the fragment ions that appear in the mass spectrum. Therefore, we concluded that our suggested method for the determination of major isoquinoline alkaloids by UPLC-Q-TOF can be useful not only for quality control, but also for rapid and accurate investigation of phytochemical constituents of medicinal plants.

• 전력전자학회논문지
• /
• 제21권2호
• /
• pp.175-181
• /
• 2016

In the conventional E-bike, a 42 V/10 A Li-ion battery drives a 24 V/10 A BLDC motor via a 6-switch PWM DC/AC inverter. The major problems of the conventional battery-fed motor drive systems are listed as follows. To charge the battery, an external battery charger (adapter) is required, which degrades the portability of E-bike users. In addition, given the high-frequency operation of the motor drive inverter, the switching losses are significant, which degrades the whole power efficiency. High-voltage batteries (42 V) require a complex battery management system (BMS), which degrades the reliability of the battery pack. In this paper, an embedded boost-converter battery charger for E-bikes is proposed. The variable output boost converter, which converts 16.8 V battery voltage to the required variable voltage of the inverter input, can use a low-voltage battery and thus improve the reliability of batteries. By varying the inverter input voltage via boost converter, a DC link voltage control method can be applied to reduce the switching frequency of the inverter, which improves the whole power efficiency. Given that the function of a flyback charger is integrated in the proposed boost converter, the portability of the E-bike user can be maximized by excluding an external adapter. The validity of the proposed circuit will be confirmed by operation mode analysis and simulation. Moreover, experimental results of integrative charger using Li-ion battery and 200 W motor test will be showed with a prototype sample as well.

• Bulletin of the Korean Chemical Society
• /
• 제12권2호
• /
• pp.130-137
• /
• 1991

The following new cryptand 221 complexes of lanthanides(Ⅲ) and dioxouranium(Ⅵ) nitrate have been synthesized: $(Ln(C_{16}H_{32}N_2O_5)(H_2O)_2(NO_3)_3\ and \((UO_2)_2(C_{16}H_{32}N_2O_5)(H_2O)_4(NO_3)_4$. These complexes have been identified by elemental analysis, moisture titration, conductivity measurements and various spectroscopic techniques. The proton and carbon-13 NMR as well as calorimetric measurements were used to study the interaction of cryptand 221 with La(Ⅲ), Pr(Ⅲ ), Ho(Ⅲ) and $UO_2(Ⅱ)$ ions in nonaqueous solvents. The bands of metal-oxygen atoms, metal-nitrogen atoms and O-U-O in the IR spectra shift upon complexation to lower frequencies, and the vibrational spectra ({\delta}NMN$) of metal-amide complexes in the crystalline state exhibit lattice vibrations below 300 $cm^{-1}$. The NMR spectra of the lanthanides(Ⅲ) and dioxouranium(Ⅵ) nitrate complexes in nonaqueous solvents are quite different, indicating that the ligand exists in different conformation, and also the $^1H$ and $^{13}C-NMR$ studies indicated that the nitrogen atom of the ring has greater affinity to metal ions than does the oxygen atom, and the planalities of the ring are lost by complexation with metal ions. Calorimetric measurements show that cryptand 221 forms more stable complexes with $La^{3+}$ and $Pr^{3+}$ ions than with $UO^{22+}$ ion, and $La^{3+}/Pr^{3+}$ and $UO^{22+}/Pr^{3+}$ selectivity depends on the solvents. These changes on the stabilities are dependent on the basicity of the ligand and the size of the metal ions. The absorption band (230-260 nm) of the complex which arises from the direct interaction of macrocyclic donor atoms with the metal ion is due to n-{\delta}*$ transition and also that (640-675 nm) of $UO^{22+}$-cryptand 221 complex, which arises from interaction between two-dioxouranium(Ⅵ) ions in being out of cavity of the ligand ring is due to d-d* transition.