• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.9
• /
• pp.1214-1218
• /
• 2004

Data on 958 Karan Fries (KF) and 780 Karan Swiss (KS) cows, born during 1974 to 1992 at National Dairy Research Institute, Karnal were evaluated for causes of culling and their impact on milk performance and herd strength. Causes of culling were classified as voluntary culling (low milk yield) and involuntary culling (other than milk yield). The milk yield of cows was evaluated inretrospectively by estimating expected breeding value (EBV) on the basis of first lactation yield (FLY) and all available lactation yield (ALY). The culling rate of KF cows over the years varied from 10.89 (1988) to 33.92% (1991) with an overall average of 20.96% and in KS from 19.91 (1984) to 33.74% (1989) with an overall average of 25.01%. Reproductive disorders, teat and udder problems, low milk production, health and locomotive disorders were the major reasons of culling accounted respectively for 5.56, 4.97, 4.61, 3.18 and 2.24% of herd strength in KF cows. The corresponding causes of culling were 6.20, 6.26, 7.69, 1.49 and 2.67% of herd strength in KS cows. The involuntary culling of cows accounted for 82.4% in K F and 76.1% in KS cows of total culling. The average annual disposal rate in KF and KS was 26 and 30% whereas annual replacement rate was 24 and 26% respectively. The EBV of involuntary culled cows on the basis of FLY and ALY was 3,111 and 3,515 kg in KF; and 2,669 and 2,940 kg in KS cows respectively. The EBV of selected cows on the basis of FLY and ALY was 3,242 and 3,549 kg in KF and 2,893 and 3,245 kg in KS cows respectively. The average breeding value of involuntary culled cows was not significantly different from selected cows in both the herds. The high rate of involuntary culling of potential cows might be major factor responsible for declined performance and size in these herds. The results indicated that higher genetic gain (2.14% of herd average in KF and 3.49% of herd average in KS) could be obtained by restricting the involuntary culling (50% of total culling) through improved management practices and increasing replacement rate.

• Environmental and Resource Economics Review
• /
• v.25 no.4
• /
• pp.545-564
• /
• 2016

Recently as fine and ultra fine particles become major environmental issues in Korea, it is very important to develop effective solutions to air pollution. Accordingly this study aims at detecting causes of air pollution by using models and examining if diesel price increases contribute to reduction of diesel consumption and air pollution. TSP, PM10, $NO_X$, $SO_X$, CO, and VOC are included as major air pollutants. As a result, we found invert U shape curve between pollution and income for all air pollutants except CO. Consumer price index, coal power capacity, diesel consumption, frequency of yellow dust, number of natural gas buses, number of transport business, annual average temperature, number of manufacturing businesses are also influential in explaining causes of air pollution. As diesel price increases by 1%, air pollutants decline between 0.07~0.12% in the short run. Simultaneously, the additional revenue from increases in diesel prices might be transferred to support expansion of biofuel market. Also, stronger policy should be developed to mitigate the current air pollution problem.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.653-664
• /
• 2021

As the construction standards for energy-saving eco-friendly housing have recently been strengthened, the proportion of window work has increased with the demand for high-efficiency housing. Windows have high frequency of use, and there is the potential for many defects to occur depending on the characteristics of construction. According to a government agency's survey of defects in public rental apartment housing, defects in the windows work accounted for the highest portion of complaints received. Accordingly, related previous studies were considered, and it was found that the existing studies in Korea lacked research that reflected the construction characteristics of window work and the importance of maintenance. In addition, existing overseas studies considered both the constructor and the resident's position, considering the cost aspect together, and showed a trend of structuring the relationship between defects and causes. Therefore, this study will analyze the causes of defects that can occur in the construction phase of the windows work, reflect the construction characteristics, and derive major factors that consider the importance of maintenance based on the possibility of recurrence after repairing defects. Ultimately, this research will contribute to preventing defects in the construction phase and reducing maintenance costs by presenting a highly effective defect management plan through selecting the major factors for each defect type that can be intuitively judged by analyzing the causal relationship between defect types and causes.

• Korean Journal of Acupuncture
• /
• v.30 no.4
• /
• pp.230-242
• /
• 2013

Objectives : DongUiBoGam is a representative medical literature in Korea. This research intends to structurally grasp how DongUiBoGam understands the human body and review the methods of acupuncture and moxibustion in the NaeGyeong chapter of it using text mining. Methods : The structure of DongUiBoGam was analyzed with specific parts of the book that described contents, major premises of understanding the human body, and processes of treatment. We analyzed characteristics of each acupoints in a relationship with causes of diseases & symptoms in the NaeGyeong chapter using a Term Frequency - Inverse Document Frequency(TFIDF). Results : Three different categories of pattern identification(PI) were formed after structural analysis of DongUiBoGam. Every causes of diseases & symptoms were transformed according to the three categories of PI. After analyzing the relationship between acupoints and causes of diseases & symptoms, 114 acupoints were visualized with TFIDF values of three PI categories. Conclusions : The selection of acupoints in NaeGyeong chapter of DongUiBoGam were linked to causes of diseases & symptoms based on the three PI categories. Through visualization of bipartite relationships between acupoints and causes of diseases & symptoms, we could easily understand characteristics of each acupoint.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.54-59
• /
• 2023

The relationship between near misses and major accidents can be confirmed using the ratios proposed by Heinrich and Bird. Systematic reviews of previous national and international studies did not reveal the assessment process used in near-miss management systems. In this study, a model was developed for assessing near misses and major factors were derived through case application. By reviewing national and international literature, 14 factors were selected for each dimension of the P2T (people, procedure, technology) model. To identify the causal relationship between accidents and these factors, a near-miss assessment model was developed using a Bayesian network. In addition, a sensitivity analysis was conducted to derive the major factors. To verify the validity of the model, near-miss data obtained from the ethylene production process were applied. As a result, "PE2 (education)," "PR1 (procedure)," and "TE1 (equipment and facility not installed)" were derived as the major factors causing near misses in this process. If actual workplace data are applied to the near-miss assessment model developed in this study, results that are unique to the workplace can be confirmed. In addition, scientific safety management is possible only when priority is given through sensitivity analysis.

• Journal of radiological science and technology
• /
• v.40 no.1
• /
• pp.143-153
• /
• 2017

As for the current state of college taekwondo athletes' sport injury, times of occurrence and major causes showed differences in weight class and career, while situations of occurrence had differences in grade, weight class, and career. As for the measures to improve their coping ability, first aid showed differences in grade, while prevention of injury had differences in grade and career. Treatment methods turned out to have no differences. For college taekwondo athletes, sport injury occurred during exercise, mostly when they fell. In addition, lack of skill was the greatest major cause of sport injury. As for the sport injury coping ability, ice massage was used as first aid and self-massage was performed. For prevention of injury, sufficient fatigue recovery was considered to be the priority of prevention of injury.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.263-271
• /
• 2013

Change orders have been widespread in both the private and public construction sectors. In particular, in the case of G2B (Government to Business) contracts, adjustment of contract price and/or schedule extension is a frequent occurrence due to change orders. To uncover the causes of change orders and suggest an appropriate strategy, this study analyzed 296 cases of change orders in military facility construction projects from 2008 to 2010. The analysis revealed that the major causes of change orders are users' additional requirements (28.38%), a change of finishing materials (23.99%), and change of footing type (17.57%), in that order. Building on the results of this analysis, the authors suggest plans for practical improvements. Specific recommendations include 1) reflect user requirements at the early stage, 2) minimize the use of additional budget due to change orders, and 3) reduce the process and time for contract amendment, among others. The results of this study may provide significant implications to those involved in military construction projects, particularly project owners (i.e., the Ministry of Defense) and contractors.

• KIEAE Journal
• /
• v.5 no.4
• /
• pp.9-16
• /
• 2005

The purpose of this study is to analyze the safety issues with regard to architectural elements in housing. Causes of accidents and threats to health are reviewed for 'safety' aspects. Threats to health tend to draw more attention due to recent increase of SHS and its public perceptions. The majority of victims by accidents in residential houses are on juveniles aged under 14 in bathrooms and living rooms. Non-slip finish materials are recommended to floors for access and circulation and protective pads to furniture edges. Colored glass may increase the safety of the windows in the living room. Handles and non-slip mats will be a good addition for the safety. Human scale design of the kitchen system is mandatory and appropriate size of storages for hazardous equipment are to be provided. Passive air ventilation for better air quality by dwellers in residence is occasionally used whereas large-scale apartments provide mechanical ventilation to supplement the volume of fresh air. Since the internal air quality is proved one of the major causes of atopic and respiratory diseases, steady effort to achive better air quality utilizing appropriate materials, plants and equipment is mandatory. Frequent cleaning and the use of anti-fungus materials are necessary because House Dust Mites are believed to be one of main causes of such diseases.

• Journal of Environmental Health Sciences
• /
• v.32 no.2 s.89
• /
• pp.192-197
• /
• 2006

This study was performed to investigate anti-microbial activity of soybean extract against oral microbes, and to determine the minimum inhibition concentration (MIC) for microbes causing oral diseases. The soybean extract was prepared using ethyl acetate and it was treated with 16 types of oral microbes at a concentration of 5.00 mg/ml (0.5%). The MIC of soybean extract for three major microbes causing oral diseases was determined. The anti-microbial activity and MIC were measured using broth dilution method. Significant reduction of microbial activities of 9 types oral microbes when the soybean extract was added to the broth compared to the control (p<0.01). The extract showed higher anti-microbial activity against some anaerobic strains (P. gingivalis and P. intermieia). S. mutans, which causes dental caries, showed MIC at a concentration of 40 mg/ml for the soybean extract. P. gingivalis, which causes adult periodontal disease, showed MIC at a concentration of 20 mg/ml for the extract. C. albicans, which causes denture stomatitis and angular stomatitis, showed MIC at a concentration of 20 mg/ml for the extract. These results indicate that soybean extract showed anti-microbial effort against 9 types of oral microbes, and the anti-microbial effect of the extract against oral microbes was stronger against fungi than against bacteria. The anti-microbial mechanism of soybean extract against oral microbes should be investigated, and more research for clinical application is required at a level of actual intake.

• Journal of Korean Institute of Fire Investigation
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2008

The purpose of this paper is to report gas fire accident based on classification of the major gas fire causes (including handling mistakes, inferior goods, etc.), fire classifications (fire, explosion, leakages, etc.), damage levels(1st, 2nd, 3rd, 4th grade levels), casualties (death, serious wound, slight injury) since gas fire has been generated according to growth of gaseous fuel consumption on home and enterprises with various accident causes. Among gaseous fuels, LPG facility can be c1assified as gas container, pressure regulator, gas hose, interim valve, combustion port. Any fire or any explosion can be caused from handling mistakes, inferior goods on each parts as stated above. Exact gas fire causes shall be identified based on previous case studies on similar fires with consideration of lesson learns.