• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1970-1971
• /
• 2007

The efficiency of such work highly depend on the worker's safety, who is protected by tools such as gloves, sleeves, blankets and flexible coverings among other manufactured natural-rubber goods. Use, storage and maintenance of these tools guarantee the quality and durability of the material. However, it might be observed that good tools made of such material are disapproved of when received from manufacturers or when they are removed from the warehouse for replacement. This work shows the experimental results obtained from ageing at a temperature of $100^{\circ}C$ for 48, 70 and 312 h, although the application of AC electrical tension in samples and the measuring of current leakage are presented. The measurements in samples were carried out with samples prepared from the deformulated commercial materials and respectively reformulated into thin films. The obtained results showed the mechanisms of conduction of samples in low and high electric fields. It was also identified an electric tension transition showing that in low fields it prevails the Ohm's law conduction, and in high electric fields it prevails the conduction of space charge limited current (SCLC). These results can support the natural rubber formulation process having as their main objective the reducing of the mechanisms that occur under high conduction current in high electric fields, which leads the material to a dielectric breakdown. It is necessary to research this raw material from different internationally standard clones to characterize dielectric and electric properties for industrial applications. Moreover, this natural material has a low commercial price when compared to the synthetic ones.

• 원예과학기술지
• /
• 제33권5호
• /
• pp.697-704
• /
• 2015

본 연구는 절화 국화 'Baekma'를 일본으로 선박 수출 시 수송 환경을 분석하였으며, 절화 국화의 선도를 유지하기 위한 최적 전처리제를 구명하고자 하였다. 그 결과 일본으로 절화 국화를 수출시 약 3일~5일이 소요되었으며, 국내 이동, 선박 운송 및 일본 내에서 이동은 저온이 유지되었으나, 일본에서 검역시 상온에 노출되는 것으로 조사되었다. 이는 품질의 손상을 야기하는 것으로 수송 전체 기간동안 저온조건을 유지해야 할 것으로 판단되었다. 또한, 전처리제는 Chrysal RVB, NaOCl 처리구가 절화수명 연장에 효과적이었으며, Chrysal RVB 전처리는 절화 국화가 끝까지 만개하여 화형이 유지되었다. 박테리아 검정 결과 NaOCl, $ClO_2$ 처리구의 박테리아가 검출되지 않아 살균 성분이 세균증식을 막아준 것으로 판단되었다. 그러나 $ClO_2$처리구는 수확 후 초기 생육에 영향을 미치는 것으로 사료되었다. Chrysal RVB 처리 및 NaOCl 처리구의 엽록소 함유량이 가장 높은 것으로 조사되었다.

• 한국화재소방학회논문지
• /
• 제23권3호
• /
• pp.110-120
• /
• 2009

터널의 경우 타구조물에 비해 화재빈도가 상대적으로 높지는 않으나, 밀폐된 공간이라는 특성상 5분 이내 $1000^{\circ}C$ 이상으로 급격한 온도상승이 발생할 수 있으므로, 화재발생시 대형 인명피해 및 화재 후 막대한 보수 보강비용이 파생된다. 이러한 터널화재로 인한 구조적 손상을 규명하기 위해, KS F 2257-1과 EFNARC 규정에 부합하고 터널 콘크리트 라이닝의 화재손상평가가 가능한 가열로를 개발하였다. 개발된 가열로를 실증실험에 사용하여 터널화재 시나리오(ISO, $1^{\circ}C$/SEC, MHC, RWS)에서의 콘크리트 PC패널라이닝의 폭렬특성과 화재손상범위를 ITA기준을 적용하여 평가하였다. 실증실험결과 ISO 화재조건에서는 30mm, $1^{\circ}C$/SEC에서는 20mm, MHC에서는 100mm, RWS에서는 50mm로 화재손상범위가 평가되었으며, 폭렬깊이는 RWS와 MHC 화재조건에서 30mm가 발생하는 것으로 나타났다.

• 한국건설관리학회논문집
• /
• 제9권3호
• /
• pp.85-94
• /
• 2008

건설산업은 기획단계에서 설계, 시공, 유지관리 및 철거단계에 이르기까지 다양한 특성을 가진 프로세스로 구성되어지며, 각 프로세스에는 다양한 업무주체가 참여하고 있다. 최근 건축이 복잡화, 다양화 되어감에 따라 각각의 업무주체들 협업과정상에서 생성되는 다양한 건설정보의 교환표준화에 대한 연구가 활발히 논의되고 있다. 그러나 국제데이터교환 표준인 IFC에 관한 국내 연구로는 IFC의 2D기반확장에 관한 연구, 3D, 4D에 관한 연구가 이루어지고 있으나, 기존 연구에서는 이론적인 방향 제시 및 모델제시에 그치고 있는 실정이다. 따라서, 본 연구의 목적은 3D CAD Model을 이용하여 국제 건설데이터 교환표준인 IFC의 호환성을 테스트하고, IFC를 이용한 호환성 확보의 문제점을 도출하고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.1103-1107
• /
• 2009

최근에는 선박의 교통을 관리하는 관할구역이 항계내에서 연안해역으로 확대되는 개념으로 변해가고 있는 추세로 연안해역의 교통량과 해운, 수산 및 해양산업의 발전에 따른 해난사고로 인한 인명 및 환경피해의 심각성이 증대되고 있다. 따라서 선박의 안전항해와 항만 입출입 선박의 안전확보를 위한 원조시설로 AIS를 육상국, 무인등대, 부표, 해상시설물 등에 설치하는 항로표지용 AIS 시설을 도입하여 관리.운영 및 유지보수에 있어서 보다 효율적인 방법이 요구되고 있다. 이러한 현실에서 해양 선진국에서는 관련된 장비인 AtoN AIS(Aids to Navigation AIS : 항로표지 AIS) 설비를 개발하여 항로에 적용하였다. 실제로 무인화에 따른 운용, 유지.관리 및 확인 등이 어려운 항로표지 및 항해안전 시설에 적용하여 실시간으로 해양환경 및 해상교통 상황에 대한 정보를 육상에 제공하며, 시설의 원격관리는 물론 주변을 항해하는 선박들에게는 안전정보를 제공하는 AtoN AIS 장비를 개발하고자 제어.감시용 인터페이스 모듈 및 정보교환을 위한 통신프로토콜을 구현하였다.

• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.325-333
• /
• 2021

A 3 kW grid-tied PV inverter with Gallium nitride high-electron mobility transistor (GaN HEMT) for domestic commercialization was developed using boost converter and full-bridge inverter with LCL filter topology. Recently, many GaN HEMTs are manufactured as surface mount packages because of their lower parasitic inductance characteristic than standard TO (transistor outline) packages. A surface mount packaged GaN HEMT releases heat through either top or bottom cooling method. IGOT60R070D1 is selected as a key power semiconductor because it has a top cooling method and fairly low thermal resistances from junction to ambient. Its characteristics allow the design of a 3 kW inverter without forced convection, thereby providing great advantages in terms of easy maintenance and high reliability. 1EDF5673K is selected as a gate driver because its driving current and negative voltage output characteristics are highly optimized for IGOT60R070D1. An LCL filter with passive damping resistor is applied to attenuate the switching frequency harmonics to the grid-tied operation. The designed LCL filter parameters are validated with PSIM simulation. A prototype of 3 kW PV inverter with GaN HEMT is constructed to verify the performance of the power conversion system. It achieved high power density of 614 W/L and peak power efficiency of 99% for the boost converter and inverter.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.21.1-21.6
• /
• 2020

Background: Fibula free flap mandible reconstruction is the standard procedure after wide resection of the mandible. Establishment and maintenance of normal occlusion are important in mandible reconstruction both intraoperatively and after surgery. However, scar formation on the surgical site can cause severe fibrosis and atrophy of soft tissue in the head and neck region. Case presentation: Here, we report a case of severe soft tissue atrophy that appeared along with scar formation after mandibular reconstruction through the fibular free flap procedure. This led to normal occlusion collapse after it was established, and the midline of the mandible became severely deviated to the affected side that was replaced with the fibula free flap, leading to facial asymmetry. We corrected the malocclusion with a secondary operation: a sagittal split ramus osteotomy on the unaffected side and a sliding osteotomy on the previous fibula graft. After a healing time of 3 months, implants were placed on the fibula graft for additional occlusal stability. Conclusion: We report satisfactory results from the correction of malocclusion after fibula reconstruction using sliding fibula osteotomy and sagittal split ramus osteotomy. The midline of the mandible returned to its original position and the degree of facial asymmetry was reduced. The implants reduced difficulties that the patient experienced with masticatory function.

• 분석과학
• /
• 제34권2호
• /
• pp.87-98
• /
• 2021

In this study, we developed the nanoparticle multi-generator by 3D printer fusion deposition modeling (FDM) method that can reliably generate and deliver nanoparticles at a constant concentration for inhalation risk assessment. A white ABS filament was used as the test material, and SMPS was used for concentration analysis such as particle size and particle distribution. In the case of particle size, the particle size was divided by 100 nm or less and 100 to 1,000 nm, and the number of particles concentration, mass concentration, median diameter of particles, geometric average particle diameter, etc were measured. The occurrence conditions were the extruder temperature, the extruding speed of the nozzle, and the air flow rate, and experiments were conducted according to the change of conditions including the manufacturer's standard conditions. In addition, the utility of inhalation risk assessment was reviewed through a stability maintenance experiment for 6 h. As a result of the experiment, the size of the nanoparticles increased as the discharger temperature increased, as the discharge speed of the nozzle increased, and as the air flow rate decreased. Also, a constant pattern was shown according to the conditions. Even when particles were generated for a long time (6 h), the concentration was kept constant without significant deviation. The distribution of the particles was approximately 80 % for particles of 60 nm to 260 nm, 1.7 % for 1 ㎛ or larger, 0.908 mg/㎥ for the mass concentration, 111 nm for MMAD and 2.10 for GSD. Most of the ABS particles were circular with a size of less than 10 nm, and these circular particles were aggregated to form a cluster of grape with a size of several tens to several hundred nm.

• 한국융합학회논문지
• /
• 제10권1호
• /
• pp.35-43
• /
• 2019

본 논문은 산업입지정보시스템을 개선하기 위한 연구이다. 산업입지정보시스템 현황 및 문제점을 분석하고 시스템을 개선하기 위한 목표 및 방향을 설정하였으며, 이를 바탕으로 시스템 개선 적용 방안을 마련하여 보았다. 산업입지정보시스템은 현재 노후화된 H/W 및 상용 S/W 사용으로 인한 유지보수 비용 문제, 오래된 개발 프레임워크 사용으로 시스템 문제 발생 시 즉각적인 대응 어려운 문제, 정보검색 및 제공에도 한계가 있는 것으로 분석되었다. 따라서 본 논문에서는 시스템 개선을 위한 전자정부 표준 프레임워크 적용 및 Open Source S/W 도입을 통한 시스템이 가지고 있는 문제점에 대한 해결 방법과 정보 연계 강화 및 시각화 기능 적용을 제시하였으며, 향후 산업입지정보시스템 개선을 위한 시스템 분석/설계 및 개발 시 도움이 될 것으로 판단된다.

• Journal of Gastric Cancer
• /
• 제19권1호
• /
• pp.72-82
• /
• 2019

Purpose: Despite its clinical benefits, enhanced recovery after surgery (ERAS) is less widely implemented for gastric cancer surgery. This nationwide survey investigated the current status of the implementation of ERAS in perioperative care for gastric cancer surgery in South Korea. Materials and Methods: This survey enrolled 89 gastric surgeons from 52 institutions in South Korea. The questionnaire consisted of 24 questions about the implementation of the ERAS protocols in the management of gastric cancer surgery. The survey was carried out using an electronic form sent via email. Results: Of the 89 gastric surgeons, 58 (65.2%) answered that they have knowledge of the concept and details of ERAS, 45 (50.6%) of whom were currently applying ERAS for their patients. Of the ERAS protocols, preoperative education (91.0%), avoidance of preoperative fasting (68.5%), maintenance of intraoperative normothermia (79.8%), thromboprophylaxis (96.5%), early active ambulation (64.4%), and early removal of urinary catheter (68.5%) were relatively well adopted in perioperative care. However, other practices, such as avoidance of preoperative bowel preparation (41.6%), provision of preoperative carbohydrate-rich drink (10.1%), avoidance of routine abdominal drainage (31.4%), epidural anesthesia (15.9%), single-dose prophylactic antibiotics (19.3%), postoperative high oxygen therapy (36.8%), early postoperative diet (14.6%), restricted intravenous fluid administration (53.9%), and application of discharge criteria (57.3%) were not very well adopted for patients. Conclusions: Perioperative management of gastric cancer surgery is largely heterogeneous among gastric surgeons in South Korea. Standard perioperative care based on scientific evidence needs to be established to improve the quality of surgical care and patient outcomes.