• 한국구조물진단유지관리공학회 논문집
• /
• 제24권5호
• /
• pp.61-68
• /
• 2020

본 연구에서는 지하 콘크리트 구조물의 누수 균열에 사용되는 주입형 누수보수재료의 품질관리 방안으로 규격화된 국제표준 ISO TS 16774 ｢Part 3 Test method for water(wash out) resistance｣와 KS F 4935 ｢점착유연형 고무 아스팔트계 누수보수용 주입형 실링재｣를 이용하여 현재 우리나라 누수보수현장에서 사용하고 있는 주입형 누수보수재료 5계열(합성고무계, 시멘트계, 아크릴계, 에폭시계, 우레탄계) 3종류씩, 총 15종류의 보수재료에 대한 지하 콘크리트 구조물이 처한 지하수의 유동성에 관한 유실 대응력의 안정성을 연구·검토하였다. 그 결과, KS F 4935 규격에서 규정하고 있는 "질량 변화율이 -0.1% 이내"의 성능 기준으로 고찰하면 합성고무계 RG-2, 우레탄계의 UG-1을 제외하고 나머지 13Type 보수재료는 다소 지하수의 유동성에 따른 유실 저항력의 안정화 방안 검토가 필요 할 것으로 판단된다. 본 연구 결과는 콘크리트 구조물의 균열 부위에 사용되는 보수재료의 선정에 있어 기본 지표로 사용가능 할 것으로 판단된다. 또한, 추후에 연구 개발 되는 보수재료의 품질 향상에 반영할 수 있는 기준 자료의 활용을 기대할 수 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.706-712
• /
• 2006

The present volume should address the unique method of deterioration analysis tailorly applicable to the study of traction motor, not existent maintenance works system with the time period standard, such as regular inspection works, maintenance works, selection for the repair works. The present volume has executed various field experiments in this method, should propose the procedures and baselines for anticipating the life expansion of traction motor and building precautional maintenance system for it, on the basis of these field experiments. The improvement scheme of traction motor maintenance system in the present volume should be to keep the out-of-order rate from unexpectedly soaring and make the cost-reduction effect through better maintenance work method.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.241-244
• /
• 2006

The basic prediction model was constructed to obtain optimal maintenance method for concrete structure under marine environment by exploring the mechanism of mono and combined deterioration in lab. This model was planned to be upgraded with data acquired from several exposure specimens under same environment as structures. The computer program developed to give useful guidance observer would be improved. Several repair materials and repair construction methods applied to exposure specimens will be tested for its performance of prohibit salt attack and freezing & thawing action during experimental period about ten years. All of these data could be available to complete the prediction system. The manager will be able to use the system for optimal maintenance of marine concrete structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.531-534
• /
• 2005

The basic prediction model was constructed to obtain optimal maintenance method for concrete structure under marine environment by exploring the mechanism of mono and combined deterioration in lab. This model was planned to be upgraded with data acquired from several exposure specimens under same environment as structures. The computer program developed to give useful guidance observer would be improved. Several repair materials and repair construction methods applied to exposure specimens will be tested for its performance of prohibit salt attack and freezing & thawing action during experimental period about ten years. All of these data could be available to complete the prediction system. The manager will be able to use the system for optimal maintenance of marine concrete structures.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.344-349
• /
• 2009

To be Low Carbon and Green Growth, it is necessary that Long-Life Housing based on Green Technology is supplied. The main concern at the moment is developing Sustainable Housing relative to Life-Cycle or Life-Style of the residents, and the resident of Remodeling or Redevelopment. This study is aim to be Development of Maintenance Process in order to make steady dwelling when supplying Long-Life Housing that separates Support(Skeleton) and Infill different from the existing Short-Life Housing, and has durability, alterability, available remodeling, easy maintenance. Long-Life Housing should consider the maintenance about movement and variableness. In contrast, the maintenance of the existing Housing is regular maintenance, change and repair by damage. As well as Long-Life Housing should be demanded proper Development of Maintenance Process because of difference of Housing in concept, design and Construction. Therefore, this study looks into problems when applying Development of Maintenance Process in Long-Life Housing, and shows Development of Maintenance Process about the efficient Long-Life Housing for the manager.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.652-655
• /
• 2004

In these days, repair materials for leakage cannot help but being taken in temporary way without any noticeable countermeasure. This kind of repair is socially criticized many times that is defective construction even if tills costs a lot. It was not arrange the standard for performance evaluation test method and quality maintenance for materials, even it has been used various injection repairing agent. In conclusion, We suggest that the test method for repair materials for leakage to establish the leakage repairing technology as increase of structure demand, so that the necessity of the establishment of the quality control standard and the performance testing way on the relevant water-proof seal is increasing a lot to regulate the water-proof technology and the leakage repair technology.

• 품질경영학회지
• /
• 제31권3호
• /
• pp.185-192
• /
• 2003

In this paper, the properties on the optimal replacement policies for the general failure model are developed. In the general failure model, two types of system failures may occur : one is Type I failure (minor failure) which can be removed by a minimal repair and the other, Type II failure (catastrophic failure) which can be removed only by complete repair. It is assumed that, when the unit fails, Type I failure occurs with probability 1-p and Type II failure occurs with probability p, $0\leqp\leq1$. Under the model, the system is minimally repaired for each Type I failure, and it is repaired completely at the time of the Type II failure or at its age T, whichever occurs first. We further assume that the repair times are non-negligible. It is assumed that the minimal repair times in a renewal cycle consist of a strictly increasing geometric process. Under this model, we study the properties on the optimal replacement policy minimizing the long-run average cost per unit time.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.58-65
• /
• 2017

Different from general operating policies applied for various waiting line situations, two complementary dyadic operating policies are applied alternatingly to a single server maintenance service center model. That is, either of the two dyadic Min (N, T) or Max (N, T) policy is applied to operate such center first and the other operating policy should be applied later, and then the same sequence of both operating policies is followed repeatedly. This operating policy is denoted by the Minimax (N, T) policy. Purpose: Because of the newly introduced operating policy, important system characteristics of the considered service center model such as the expected busy and idle periods, the expected number of customers in the service center and so on should be derived to provide necessary information for determination of the optimal operating policy. Methods: Based on concepts of the newly introduced Minimax (N, T) policy, all necessary system characteristics should be redefined and then derived by constructing appropriate relations between complementary two dyadic operating policies. Results: Desired system characteristics are obtained successfully using simple procedures developed by utilizing peculiar structure of the Minimax (N, T) policy. Conclusion: Applying Minimax (N, T) operating policy is equivalent to applying the simple N and T operating policies alternatingly.

• Journal of Microbiology
• /
• 제39권2호
• /
• pp.102-108
• /
• 2001

DNA damage response has a central role in the maintenance of genomic integrity while mutations in related genes may result in a range of disorders including neoplasic formations. The uvsZl characterized in this report is a navel uvs mutation in Aspergillus nidulans, resulting in a nucleotide excision repair (NER) phenotype: UV-sensitivity before DNA synthesis (quiescent cells), high UV-induced mutation frequency and probable absence of involvement with mitotic and meiotic recombinations. The mutation is recessive and nan-allelic to the previously characterized uvsA101 mutation, also located on the paba-y interval on chromosome I. uvsZl skewed wild-type sensitivity to MMS, which suggests non-involvement of this mutation with BER. Epitasis tests showed that the uvsZ gene product is probably involved in the same repair pathways as UVSB or UVSH proteins. Although mutations in these proteins result in an NER phenotype, UVSB is related with cell cycle control and UVSH is associated with the post-replicational repair pathway. The epistatic interaction among uvsZl and uvsB413 and uvsH77 mutations indicates that different repair systems may be related with the common steps of DNA damage response in Aspergillus nidulans.

• 비파괴검사학회지
• /
• 제27권3호
• /
• pp.268-279
• /
• 2007

The reliability of cold-bonding repair technique of carbon-fiber reinforced plastics (CFRP) laminates, often used as a temporary repair for the airplane maintenance, has been evaluated during cyclic loading and localized heating by nondestructive methods. Major concern was given to the evolution of damage after repair in the form of delaminations due to localized heating and cyclic loading combined. An area of interest both on the specimen repaired by cold-bonding and the specimen without repair where delaminations were induced by localized heating and cyclic loading was monitored by acoustic emission (AE) testing and further examined by pitch-catch low-frequency bond testing, and pulse-echo high-frequency ultrasonic testing. The results showed that the reliability of cold-bonding repair would be significantly reduced by the localized heating and cyclic loading combined rather than by the cyclic loading only. AE monitoring appeared to be an effective and reliable tool to monitor the integrity of temporarily repaired CFRP laminates in terms of the structural health monitoring (SHM) philosophy.