• 한국터널지하공간학회 논문집
• /
• 제26권1호
• /
• pp.79-89
• /
• 2024

터널굴착 중 지하수의 과다유입은 터널의 안정성 및 시공성에 영향을 줄 뿐만 아니라 지하수위 저하에 따른 상부지반의 침하를 발생시키는 주요 원인 중 하나이다. 지하수위 하부 토사구간과 파쇄구간 내 터널굴착 중 지하수 과다유입에 대한 대책으로 가장 일반적으로 적용되는 방법은 사전 그라우팅을 통한 지반 투수계수의 감소이다. 일반적으로 그라우팅 범위는 터널굴착 중 발생하는 소성구간을 목표구간으로 설정하지만 이는 그라우팅을 통한 강도증진을 목적으로 하는 경우 적절한 범위이다. 차수를 목적으로 하는 사전 그라우팅의 범위를 결정하기 위해서는 원지반의 투수계수와 차수그라우팅의 적용에 따른 투수계수의 감소량을 고려하여야 한다. 본 연구에서는 원지반의 투수계수와 그라우팅의 적용에 따른 투수계수의 감소량을 고려한 차수그라우팅의 범위산정 방법을 수학적으로 유도하고 이를 수치해석을 통해 검토하였다.

• 한국건축시공학회지
• /
• 제4권4호
• /
• pp.87-94
• /
• 2004

As the bentonite is main material to prevent from collapse of drilling hole at underground excavation works, it is increased using quantity on construction industry day by day. But, the discarded bentonite that is over using at underground excavation works is caused various enviromental trouble as soil and water pollution est. Therefore, this study aims to propose a foundamental report for pozzolan reaction of discarded Bentonite powder by heat-treatment and cooling as concrete mineral admixture. To find out pozzolan reaction ability of discarded Bentonite powder by indirect cooling & cooling using of water after heat-treatment, the experiments are excuted flow test & compressive strength on age of mortar using discarded Bentonite powder. As a result of this study, discarded Bentonite powder can be utilized as concrete mineral admixture by heat-treatment and especially, pozzolan reaction ability of discarded Bentonite powder is superior to the situation of 600℃. 60min ＆amp; cooling using of water.

• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2425-2433
• /
• 2011

1980년대에 싱가포르에 도입된 심층혼합공법 DSM (Deep Soil Mixing )은 시멘트 슬러리를 지중에 주입시킨 후 이를 원지반 연약토와 교반시킴으로써 견고한 흙-시멘트 기둥을 형성시켜 지반을 보강하는 지반개량공법으로 최근 깊은 굴착을 위한 가설 흙막이 공사에 제트그라우팅의 대안으로 많이 사용되고 있다. 본 논문에서는 OPC (Original Portland Cement)와 PBFC (Portland Blast Furnace Slag Cement)를 이용한 실내배합시험 결과, DSM 시험시공, 그리고 계측을 포함한 본 시공 결과를 분석하였으며, 이 결과는 향후 비슷한 지반에서의 DSM적용 시 참고자료로 사용될 수 있을 것으로 판단된다.

• 한국터널지하공간학회 논문집
• /
• 제17권5호
• /
• pp.563-573
• /
• 2015

For hard rock subsea tunnels the most challenging rock mass conditions are in most cases represented by major faults/weakness zones. Poor stability weakness zones with large water inflow can be particularly problematic. At the pre-construction investigation stage, geological and engineering geological mapping, refraction seismic investigation and core drilling are the most important methods for identifying potentially adverse rock mass conditions. During excavation, continuous engineering geological mapping and probe drilling ahead of the face are carried out, and for the most recent Norwegian subsea tunnel projects, MWD (Measurement While Drilling) has also been used. During excavation, grouting ahead of the tunnel face is carried out whenever required according to the results from probe drilling. Sealing of water inflow by pre-grouting is particularly important before tunnelling into a section of poor rock mass quality. When excavating through weakness zones, a special methodology is normally applied, including spiling bolts, short blast round lengths and installation of reinforced sprayed concrete arches close to the face. The basic aspects of investigation, support and tunnelling for major weakness zones are discussed in this paper and illustrated by cases representing two very challenging projects which were recently completed (Atlantic Ocean tunnel and T-connection), one which is under construction (Ryfast) and one which is planned to be built in the near future (Rogfast).

• 한국건축시공학회지
• /
• 제2권3호
• /
• pp.139-146
• /
• 2002

As the bentonite is main material to prevent from collapse of drilling hole at underground excavation works, it is increased using quantity on construction industry day by day. But, the discarded bentonite that is over using at underground excavation works is caused various environmental trouble as soil and water pollution est. This study aims to propose a foundamental report for pozzolan reaction of discarded Bentonite powder by heat-treatment and cooling as concrete mineral admixture. To find out pozzolan reaction ability of discarded Bentonite powder by indirect cooling & cooling using of water after heat-treatment, the experiments are excuted Phenolphtalein test, setting test, pH test and the analysis by X-ray diffractor. As a result of this study, discarded Bentonite powder can be utilized as concrete mineral admixture by heat-treatment and especially, pozzolan reaction ability of discarded Bentonite powder is superior to the situation of 50$0^{\circ}C$~$700^{\circ}C$, 60min.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.23.2-29
• /
• 2003

As the bentonite is main material to prevent from collapse of drilling hole at underground excavation works, the quantity of bentonite is increasingly used on construction industry day by day. But, the discarded bentonite that is excessively used at underground excavation works causes various environmental trouble such as soil and water pollution etc. Therefore, this study aims to propose a foundamental report about pozzolan reaction of discarded Bentonite powder by heat-treatment and cooling as concrete mineral admixture. To find out the strength-development properties of mortar with discarded Bentonite powder by indirect cooling & cooling using of water after heat-treatment, the experiments such as flow test, and compressive strength test on curing age of mortar are excuted. As a result of this study, discarded Bentonite powder can be utilized as concrete mineral admixture by heat-treatment and especially, the strength-development properties of mortar mixing with discarded Bentonite powder is superior to the situation of $600^{\circ}C$.60min-cooling using of water.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1522-1529
• /
• 2009

When a shaft is excavated in Korea, the mechanized method such as RBM(Raise Boring Machine) or RC(Raise Climber) is used independently of depth. But usually, the mechanized method is useful for the deep depth. On the contrary, when the depth of shaft is short, the cost of excavation increase. So in the case of shaft constructon less than 100m, we need to consider more suitable method of shaft construction such as Stage-cut which is one of blasting methods. Stage-Cut is widely used in the field of shaft construction in Japan as a tool of rock excavation. The main purpose of this study is to provide technical guidance for design and construction of shafts in rock, using Stage-cut method which is suitable for 20m~80m depth shaft. In this study, Blasting tests was performed in field, according to rock classification. Finally, the stage-cut method which is suitable for the geology of Korea was developed.

• 한국터널지하공간학회 논문집
• /
• 제12권3호
• /
• pp.247-255
• /
• 2010

숏크리트의 부착강도는 천정부의 낙반방지와 발파진동에 의한 숏크리트 탈락방지에 중요한 역할을 하는 요소이다. 따라서, 숏크리트의 부착상태평가는 품질관리의 주요 요소가 될 수 있다. 본 연구는 터널 내 발파에 의하여 숏크리트에 미치는 최대 입자속도를 예측하고, 발파 진동에 의한 숏크리트의 부착상태를 평가하기 위하여 수행되었다. 이를 위하여 현재 시공중인 터널현장에서 피난연락갱의 발파시 본선부 및 서비스 터널의 발파진동을 측정하였으며 충격반향시험을 수행하여 숏크리트-암반의 부착상태를 평가하였다. 충격반향시험 신호분석을 위하여 시간-주파수 영역 해석 기법을 도입하였으며 평가결과, 국내에서 일반적으로 시행되는 발파조건에서는 숏크리트와 암반의 부착력 손실(들뜸 현상)은 거의 발견되지 않았으며, 숏크리트 부착력 손상 가능성은 낮은 것으로 판단되었다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.109-114
• /
• 2003

It is the common practice to reinforce excessively the secondary tunnel lining due to the lack of rational insights into the ground loosening loads. The main load of the secondary lining for drained-type tunnels is the ground loosening. The main cause of the load for secondary tunnel lining is the deterioration of the primary support members such as shotcrete, steel ribs, and rockbolts. Accordingly, the development of the analysis model to consider the ground-primary supports-secondary lining interaction is very important for the rational design of the secondary tunnel lining. In this paper, the interaction is conceptually described by the simple mass-spring model and the load transfer from the primary supports to the ground and the secondary lining is showed by the characteristic curves including the secondary lining reaction curve for the theoretical solution of a circular tunnel. And also, the application of this model to numerical analysis is verified in order to review the potential tool for practical tunnel problems with the complex conditions like non-circular shaped tunnels, multi-layered ground, sequential excavation and so on.

• 한국터널지하공간학회 논문집
• /
• 제18권2호
• /
• pp.143-154
• /
• 2016

최근 국내 빈번하게 발생되고 있는 지반함몰 현상의 원인, 현황, 대책에 대하여 지반공학적인 접근 방법으로 조사하였다. 국내 발생된 지반함몰은 대부분 터널 굴착 공사와 지중매설관의 손상에 의한 것으로 나타났다. 용산역과 석촌 지하차도 지반함몰 사례와 같이, 굴착 공사 중 지반함몰은 지하수와 토사의 과다 유출이 주된 원인으로 나타났다. 특히, 충적층과 같은 연약지반에서의 기계식 굴착 시, TBM 굴착이 멈춘 지점에서 지반함몰 위험이 큰 것으로 나타났다. 서울시에서 발생된 지중매설관 손상으로 인한 지반함몰 사고를 종합하였을 때, 시공 시의 부주의, 노후화, 연약지반에서의 관의 부등침하 등이 지반함몰의 원인으로 나타났다. 터널 굴착 공사에 의한 지반함몰은 공사 시 발생되는 지하수, 토사의 이동에 대한 모니터링을 통해 대비할 수 있다. 지중매설관 손상으로 인한 지반함몰은 지중매설관의 생애주기 분석 및 유지관리 혹은 관 상부의 토압 분산 및 토압 지지력 증대를 통하여 대비할 수 있을 것으로 판단된다.