• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1236-1237
• /
• 2008

Carbon nanotube(CNT) materials are expected a stable current collector without the phenomena such as oxidizing and melting of grid by redox electrolyte and with low cost. In this paper, two types of dye-sensitized solar cells(DSSCs) with Pt abd CNT as a counter electrode were fabricated, then the energy conversion efficiency characteristics were investigated. The main purpose of this study is to find out the possibility of CNT material as cheap current collector of a large scale DSSC module. In addition, the Hall coefficient were measured by using FCM analysis.

• Applied Science and Convergence Technology
• /
• v.23 no.6
• /
• pp.366-370
• /
• 2014

ZnO:Al transparent conductive films were deposited on glass substrates by RF magnetron sputtering technique and annealed by rapid thermal annealing system. The influence of annealing time on the structural, electrical, and optical properties of ZnO:Al thin films was investigated by atomic force microscopy, X-ray diffraction, Hall method and optical transmission spectroscopy. As the annealing time increases from 0 to 5 min, the crystallinity is improved, the root main square surface roughness is decreased and the sheet resistance is decreased. The lowest sheet resistance of ZnO:Al thin film is 90 ohm/sq. The reduction of sheet resistance is caused by increasing carrier concentration due to substituent Al ion. All films are transparent up to 80% in the visible wavelength range and the adsorption edge is a blue-shift due to Burstein-Moss effect with increasing annealing time.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.411-414
• /
• 2002

This paper proposed new techniques of rotor position detection for Switched Reluctance Motor(SRM). This technique is very simple and easy to find out rotor position. The main idea uses the impulse responses which have different values between aligned and unaligned. In order to obtain the rotor position, the Impulse applied to the unenergized phases and their responses are analized to control the speed of SRM without shaft sensor, Experimental results verify the feasibility of the proposed method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.450-454
• /
• 2003

This paper proposes a new driving scheme for single-phase SRM. The driving scheme is very simple and inexpensive. By use of this scheme, simple power devices based on low switching losses enable to high efficiency SRM drive. Starting, One of the main problem in single-phase SRM is overcame by a new starting algorithm with one hall sensor and a parting magnet. The proposed single phase SRM has a high efficiency and robust drive characteristics compared to that of a universal motor.

• Applied Science and Convergence Technology
• /
• v.24 no.6
• /
• pp.242-244
• /
• 2015

ZnO:Ga thin films were deposited by RF magnetron sputtering technique from ZnO (3 wt.% $Ga_2O_3$) target onto glass substrates under various RF power. The influence of RF power on the structural, electrical, and optical properties of ZnO:Ga thin films was investigated by X-ray diffraction, atomic force microscopy, Hall method and optical transmission spectroscopy. As the RF power increases from 50 to 110W, the crystallinity is deteriorated, the root main square surface roughness is decreased and the sheet resistance is increased. The increase of sheet resistance is caused by decreasing carrier concentration due to interstitial Ga ion. All films are transparent up to 80% in the visible wavelength range and the adsorption edge is a red-shift with increasing RF power.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.88-90
• /
• 2001

This paper proposes a driving scheme for 6/6 single-phase SRM. The driving scheme is very simple and inexpensive. By use of this scheme, simple power devices based on low switching losses enable to high efficiency SRM drive. Starting, One of the main problem in single-phase SRM is overcome by a new starling algorithm with one hall sensor and a parting magnet. The proposed single-phase SRM has a high efficiency and robust drive characteristics compared to that of a universal motor.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.09a
• /
• pp.121-125
• /
• 2005

In this paper, the web-based monitoring system is developed for the process monitoring of mold manufacturing. The cutting force is measured by hall-sensors which is low cost and useful to be installed in machine tool indirectly. Specially, the current of main spindle in machine tool is converted into cutting force by various experiments. For effective emote monitoring, the interface that is able to offer the information of current process and cutting signal to client is establish.

• Journal of architectural history
• /
• v.29 no.6
• /
• pp.113-128
• /
• 2020

The king of Joseon Dynasty Jeong-jo commanded the renovation of Seongjeong-gak, once a study for crown prince, to serve as Pyeonjeon(便殿), a main office for kings. The renovated building strictly separated the routes designated for the king and the other officers, respectively. The interior space consisted of Youngnae, reserved for the king and his senior aides, and Youngwae, for lower ranking officers. Youngnae(楹內) and Youngwae(楹外) corresponded to the two blocks (the space between two columns) on the east and west side, respectively. Such structure of Pyeonjeon was heavily transformed over several occasions beginning from the late nineteenth century. Youngwae was subdivided into separate spaces, and the routes for the king and the officers became indistinguishable.

• Journal of architectural history
• /
• v.32 no.4
• /
• pp.51-62
• /
• 2023

Gyeongbokgungdo depicts the composition and layout of Gyeongbokgung Palace before the Japanese Invasion of Korea in 1592, as well as a monument related to pro-jamrye held at the site of Gyeongbokgung Palace in Yeongjo. Based on literature such as Dongguk Yeoji Seungram, such as Gyeongbokgungdo painted major buildings, government offices, and buildings in the backyard. In addition, the literature and the foot of the mountain, waterway, and Pond, which were identified as the site identified during the reconstruction process, are reflected, and some of the Gyeongbokgungdo contain reconstruction records. As such, Gyeongbokgungdo depicts Gyeongbokgung Palace in the early Joseon Dynasty and facilities built after the Imjin War based on the literature, and seems to have been produced around the time of reconstruction as it reflects the mountain and water system. In addition, the layout of the main hall of Gyeongbokgungdo was partially reflected in the reconstructed Gyeongbokgung Palace and used as a material to understand the layout of Gyeongbokgung Palace in the early Joseon Dynasty.

• Journal of Families and Better Life
• /
• v.26 no.5
• /
• pp.195-209
• /
• 2008

The purpose of this study was to provide basic information about design guidelines of activity areas in elderly nursing facilities. For the study, the activity areas of 44 facilities in Korea were investigated to categorize their spatial compositions and forms, and then a case study about 19 facilities was conducted to analyse their hierarchical characteristics. The results of the study were as follows: First, the major type of spatial composition among 44 research facilities was concentration, but compartment type was the main among unit-care facilities. By the year, all the types of spatial composition were evenly distributed during recent five years, while concentration type was about 40% before 2003. Second, the major form of activity areas was hall or corridor extension for large group. But there was more alcove or separation form among small group spaces. Third, in the case analysis about hierarchical characteristics, hall and corridor extension form met the requirements of accessibility and openness of public and semi-public areas. On the other hand, separation form had a problem in satisfying both requirements. The semi-private areas, which were around the elderly bedrooms and the elderly were able to watch activities in, were not sufficient in many facilities. Fourth, the division of public and semi-public area was mainly by furniture, and the individuality of semi-private area was defined by dead-end place and corner seats of the window or the corridor. The diversity of semi-private area was likely to be appeared in connection or distribution type. On the basis of the results, the basic design guidelines for activity areas in elderly nursing facilities could be suggested as follows: On the whole, connection or distribution type in spatial composition is more efficient for hierarchical flow than concentration or compartment type is, especially in Korean facilities having many elderly residents per floor. In detail, the design of public and semi-public area should be focused on their openness and accessibility. The recommended forms of activity areas were hall or corridor extension in public area, and living room, corridor extension, or large corridor in semi-public area to effectively function as large or small group spaces. In semi-private areas, the spatial diversity and individuality should be considered.