• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.4
• /
• pp.306-314
• /
• 2018

A two-axis gimbal-type X-band antenna for CAS(Compact Advanced Satellite) transmits large amount of image data to ground station regardless of satellite attitude and orbital motion. This antenna mounted on the external surface of the satellite is directly exposed to the extreme space with thermal environment during the orbital operation. Therefore, a proper thermal design is needed to maintain the antenna itself as well as other main components within allowable temperature range. In this study, the thermal design effectiveness of two-axis gimbal X-band antenna was verified through the thermal analysis. In addition, required power and duty cycle of heater were estimated through the thermal analysis under conditions of system level thermal vacuum test and on-orbit thermal environment. The thermal analysis results indicated that all the main components of X-band antenna satisfy the allowable temperature requirement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.934-937
• /
• 2010

In this paper, we did pursue the embodiment of a mouse pointing system which help the handicapped and people of not familiar with using electronics use electronic devices easily. Speech Recognition and 3-axis acceleration sensors in conjunction with a headset, a new mouse pointing system is constructed. We used speaker dependent system module which are generating the BCD code by recognizing human voices because it has high recognition rate rather than speaker independent system. Head-set mouse system is organized by 3-axis accelerometer, sound recognition module and TMS320F2812 processor. The main controller, TMS320F2812 DSP-processor is communicated with main computer by using SCI communications. The system is operated by Visual Basic in PC.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.97-101
• /
• 2003

Among GPS methods, first of all, we used RTK GPS to analyze the precision of monitoring and then on the basis of it, we developed a monitoring system using RTK GPS when we measured the behavior of main tower of a suspension bridge by using RTK GPS method and IMU, which was an inertia navigation system. Comparing a deviation between observation value using IMU and RTK GPS, X axis was 1mm, Y axis 1mm and Z axis 2.21mm. It turned out that it was possible to monitor and measure structures by using RTK GPS method. Besides, in order to manage the structures and prevent their disaster, the transformed monitoring, which used dynamic RTK GPS measurement method, was applied in real time. It was verified that it could be used as transformed monitoring measurement method for massive structures.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.113-117
• /
• 2004

Such social structures as bridges, buildings, dams and towers have been transformed by their own load or fundamental ground. They have been behaved by other external causes. These regular or irregular behaviors threaten to do their users safety. Therefore, to monitor the load of the structures or reaction shown by them could help to verify their behaviors. RTK GPS allows the use of a static base station and remote rover unit to allow for data collection within several seconds and in real time. It is useful for monitoring the behaviors of massive structures like bridges. In this Study, Among GPS methods, we used RTK GPS to analyze the precision of monitoring and then on the basis of it, we developed a monitoring system using RTK GPS when measured the behavior of main tower of a suspension bridge by using RTK GPS. Comparing a deviation between observation values, X axis was 1mm, Y axis was 1mm and Z axis 2.2mm. It turned out that it was possible to monitor and measure structures by RTK GPS.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.2
• /
• pp.125-133
• /
• 2016

In this paper, we propose a vertical axis water turbine with dual blades. A parametric study was conducted using numerical analyses. First, a two-dimensional finite-volume analysis with a commercial code was used to find the pitch angle of the main blade under different tip speed ratio conditions. Second, we developed a potential-based panel method to find the best configuration of the inner blades. Experimental tests were conducted at the circulating water channel of Chungnam National University. Various configurations of the dual blades were considered, and their performances were comparatively investigated. The results showed that the turbine with movable dual blades produces a constant torque and tip speed ratio at various flow rates.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.29-34
• /
• 2012

This study describes the selection of optimum machining conditions for a high-hardness resin by using a large 5-axis machine. The experiments were conducted to examine the main factors that affect the surface roughness, such as the spindle speed, axial and radial depths of the cut, and pattern of the cutter path. To analyze the experiment results, the factor with the biggest impact on machining was determined using the smaller-the-better characteristic of the Taguchi method; the effectiveness of the experiment was then confirmed by verifying the selected optimum machining condition.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.182-188
• /
• 1994

In recent years, navigational and fisheries instruments are rapidly advancing. Especially data processing. data transferring and data interchange throughout the digital signals has been in high progress. Even though the ship's heading is also provided by a gyro-compass, an electro-magnetic compass studying by us currently is easy to issue adequate data to instruments requiring the information for the ship's heading. especially in small fishing boats. As the main element of the electro-magnetic compass is a three-axis magnetic sensors, the developing of the high performance sensor is in highly necessity in the beginning. This paper describes on the development of electro-magnetic compass of three-axis fixed type by using three-axis detection new type magnetic sensor without gimbals. even though usual electro-magnetic compass have to need necessarily a gimbal system in order to keep horizontal condition of the compass.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.1
• /
• pp.89-96
• /
• 2015

In this paper, it is studied that kinematic analysis of a 5-axis ultrasonic inspection equipment. The equipment is comprised of three straight axes and two rotary axes. With features of ultrasonic, the transmitter and receiver of the equipment are vertical to a test surface, operating at regular intervals. To perform this well, the motions of every link should be found on the based of kinematic analysis of the equipment. We chose starting point for testing and defined relations among all links through transformation of coordinates. For double curvature-shaped test object, we generated test paths. To follow these, we found motions of all links using inverse kinematics. By using Matlab/Simulink, simulator was developed, so that we could find out desired trajectories of main axes for a scan.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.185-192
• /
• 1996

This paper presents a design of vertical axis Darrieus wind turbine combine with Savonius for wind-power generating system to be adapted for variable wind speed. The wind turbine consists of two troposkien- and four Savonius-blades. Darrieus turbine is designed with diameter 9.4[m], chord length 380[mm], tip speed ratio 5. Savonius turbine is designed with diameter 1.8[m], height 2[m], tip speed ratio 0.95. The design of turbine is laid for the main data of rated wind speed 10[m/s], turbine speed 101.4[rpm]. The generating power is estimated to maximum power 20[kW], and this is converted to commercial power line by means of three phase synchronous generator-inverter system. Generating system is designed for operation on VSVF(variable speed variable frequency) condition and constant voltage system.

• Journal of architectural history
• /
• v.14 no.2 s.42
• /
• pp.41-55
• /
• 2005

Temple with Multi-Buddha's Pavilions is a temple consisting of more than 2 Buddha's Pavilions. Individual Buddha's Pavilions tend to form distinguished area, or to keep independent axis from other Buddha's Pavilions. This study is to understand the philosophy of layout of individual Buddha's Pavilions located in the Temple with Multi-Buddha's Pavilions. To investigate a relationship to layout of individual Buddha's Pavilions on the basis of Buddhism doctrine makes us to understand philosophies about temple layout which temple constructors had. Bulkooksa, a temple having several pavilions placed in parallel, integrates diverse philosophies such as Vairocana Buddha-Ksetra from Vairocana Buddha's Pavilion, Sakyamuni Buddha-Ksetra from both Sakyamuni Buddha's Pavilion and two stupa, and Amitayus Buddha-Ksetra (Sukhavati) from Amitayus Buddha-Ksetra Pavilion. Sakyamuni Buddha's Pavilion and Amitayus Buddha's Pavilion are placed east to west in parallel, and Vairocana Buddha's Pavilion is placed behind them. Beobjusa, a temple having several pavilions placed cross axis, combines three axes such as the first, main axis linking Kumkang Gate - Chunwang Gate - Palsang Pavilion - Amitayus Buddha's Pavilion - Sakyamuni Buddha's Pavilion, the second axis linking Palsang Pavilion -Maitreya Pavilion, and the third axis linking Amitayus Buddha's Pavilion - Avalokiteshvara Pavilion. Relationship among each Buddha's land is clearly expressed by means of this cross axis layout of Buddha's Pavilions, reflecting a philosophy of rebirth in Nirvana that Wonhyo and Eusang propagated. Buseoksa, a temple having several pavilions placed the before and the behind, combines three Buddha's lands such as Maitreya Buddha-Ksetra, Amitayus Buddha-Ksetra and Vairocana Buddha-Ksetra, by means of arrangement of Maitreya Pavilion, Anyang Pavilion and Amitayus Buddha's Pavilion at bended axis, and east facing Amitayus Buddha. By investigating the philosophy of Temple layout with Multi-Buddha's Pavilions in this study, Buddha's Land conception, for people, that ancient Korean temples have, is understood.