• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.83-90
• /
• 2002

There are few earthquake records in Korea and the Japanese or American representative earthquake records have been generally used in the seismic design. In this study, some earthquake records which the range of earthquake magnitudes varies from 5.3 to 7.9 were collected and analyzed to assess which record can rationally reflect Korean seismic characteristics. In this assessment, each seismic energy and acceleration spectrum were analyzed with the unified maximum ground acceleration. Several numerical analyses on Korean representative caisson structures were also carried out to compare each dynamic displacement. In these numerical analyses, soil conditions and the dimension of structure such as height and width were changed. Through this assessment, it is found that the compatible earthquake magnitude in Korea is lower than 7. From the result of numerical analyses, it is shown that horizontal dynamic displacements corresponding to earthquake magnitudes over than 7 are quite larger than those below earthquake magnitude 7. Based on this study, it is necessary that Korean seismic design guideline will refer earthquake magnitude criteria for the construction of the economical aseismic structure.

• 대한기계학회논문집B
• /
• 제22권6호
• /
• pp.725-733
• /
• 1998

The pressure fluctuation on the surface of a submerged body has been recognized as a dominant noise source. There have been many studies concerning the flow induced noise on a flat plate. However, the noise over an axisymmetric body has not been well reported. This paper addresses the way in which we have investigated the mechanism of noise generation due to an axisymmetric body. The associated experiments and signal processing methods are introduced. A 3-dimensional axisymmetric body whose length and diameter were 2 m and 10.4 cm, was prepared as a test specimen. The wall pressure on the surface of the body was measured in a large scale low noise wind tunnel at KIMM(Korea Institute of Machinery and Metals). To measure the wall pressure, we used two microphone arrays which were tangential and normal to the flow. Based on the measured signal, frequency-wavenumber spectrum which explains the structure of turbulence noise, was estimated. Tangential to the flow, there exists convective ridge at a relatively higher wavenumber region; this can cause spatial aliasing. To circumvent this problem, the cross spectrum was interpolated. The interpolation has been performed by unwrapping the phase and smoothing the cross spectrum. The phase unwrapping was done based on the Corcos model; the phase of cross spectrum decreases linearly with the distance between microphones. Aforementioned signal processings are possible by employing the experimental results that the estimated wavenumber spectrum quite resembles the Corcos model. We try to modify the Corcos model which is applicable to the flat plate, by altering the magnitude of cross spectrum to fit the experimental data more accurately. We proposed that this wavenumber spectrum model is suitable for the 3-dimensional axisymmetric body. Normal to the flow, there exists a little correlation between signals of different microphones. The circumferential wavenumber spectrum contains uniform power along the wavenumbers.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1463-1480
• /
• 2015

This research aims to develop an empirical model for simulation of time-varying frequency in earthquake ground motion so as to be used easily in engineering applications. Briefly, 10545 recordings of the Next Generation Attenuation (NGA) global database of accelerograms from shallow crustal earthquakes are selected and binned by magnitude, distance and site condition. Then the wavelet spectrum of each acceleration record is calculated by using one-dimensional continuous wavelet transform, and the frequencies corresponding to the maximum values of the wavelet spectrum at a series of sampling time, named predominant frequencies, are extracted to analyze the variation of frequency content of seismic ground motions in time. And the time-variation of the predominant frequencies of 178 magnitude-distance-site bins for different directions are obtained by calculating the mean square root of predominant frequencies within a bin. The exponential trigonometric function is then use to fit the data, which describes the predominant frequency of ground-motion as a function of time with model parameters given in tables for different magnitude, distance, site conditions and direction. Finally, a practical frequency-dependent amplitude envelope function is developed based on the time-varying frequency derived in this paper, which has clear statistical parameters and can emphasize the effect of low-frequency components on later seismic action. The results illustrate that the time-varying predominant frequency can preferably reflect the non-stationarity of the frequency content in earthquake ground motions and that empirical models given in this paper facilitates the simulation of ground motions.

• 한국지구과학회지
• /
• 제25권7호
• /
• pp.604-614
• /
• 2004

경기도 이천에서 2002년 7월부터 12까지 총 6개월 동안 측정된 지자기 3성분 자료를 이용하여 일별 각 성분의 스펙트럼, 지자기 전달함수의 크기, 위상, 오차 등을 계산하였다. 지자기 스펙트럼은 관측기간 동안 태양활동에 의한 무작위적 강약이 반복되는 형태를 보여주었고, 유의미한 시간적 변동은 존대하지 않았다. 지자기 전달함수의 크기, 위상, 오차의 경우, 주기 100초 이하와 주기 1000초 이상에서 부분적으로 무작위적인 경향을 확인할 수 있었으나, 시간에 따른 증감추세 없이 대체로 안정적인 값을 보였다. 이와 더불어, 전기장의 P$_{1}\;^{0}$ 소스(zonal harmonics) 가정을 통하여 시간에 따른 근사적인 겉보기 전기비저항의 변동을 조사하였는데, 근사된 전기비저항의 변화는 지각의 자체적인 물성 변화보다는 수평 자기장 성분의 시간적 강약에 지배적임을 확인할 수 있었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.628-631
• /
• 2008

원격탐지를 목적으로 하는 레이다 시스템에서는 일반적으로 도플러 필터뱅크를 적용하여 목표물 반사 신호들의 스펙트럼을 분석함으로서 반사 신호의 크기 및 속도정보 등을 얻게 된다. 이러한 스펙트럼 추정방법은 오래 전부터 널리 이용되고 있는 FFT(Fast Fourier Transform) 기법을 이용한 것으로 대부분의 레이다 시스템에서 채택하고 있는 방식이다. 그러나 레이다 시스템에서의 목표물 반사 신호 획득시간이 현저히 짧은 경우, 즉 고속으로 이동하는 항공기용 시스템이나 매우 빠른 목표물들의 즉각적인 탐지가 목적인 시스템에서는 기존 FFT 스펙트럼 추정방식으로는 높은 도플러 주파수 해상도를 얻을 수 없기 때문에 정확도가 현저히 떨어질 수 있다. 따라서 본 논문에서는 이러한 문제점을 극복하기 위하여 해상도 문제가 발생하지 않는 파라메터 추정방식인 AR 스펙트럼 추정 방법에 대하여 고찰하였다.

• 한국안전학회지
• /
• 제24권1호
• /
• pp.60-68
• /
• 2009

The aim of this paper is to evaluate the compatibility of anti-vibration gloves, to predict the attenuation of vibration with different types of anti-vibration gloves, to estimate the spectra of the ISO 10819 standard, and to present an oscillating spectrum adequate for vibrating tools. This paper use two ISO standards for the measurement and evaluation of hand-arm vibration. Some anti-vibration gloves can attenuate vibration, but all the anti-vibration gloves in this study do not satisfy the ISO 10819 requirements. In case of equal vibration types, the outside materials are effective in order of leather, fabrics and rubber-coating. Anti-vibration gloves manufactured in the United State satisfy ISO 10819 criteria using United State subjects, but do not satisfy ISO 10819 using Japanese subjects. M-spectrum acceleration exists below 10Hz and H-spectrum exists above 500Hz. Generally vibrating tools have the peak of Z-axis, but generation of vibration differ from each vibrating tools.

• Earthquakes and Structures
• /
• 제7권2호
• /
• pp.141-157
• /
• 2014

The Conditional Mean Spectrum represents a powerful link between the seismic hazard information and the selection of strong ground motion records at a particular site. The scope of the paper is to apply for the city of Bucharest for the first time the method to obtain the Conditional Mean Spectrum (CMS) presented by Baker (2011) and to select, on the basis of the CMS, a suite of strong ground motions for performing elastic and inelastic dynamic analyses of buildings and structures with fundamental periods of vibration in the vicinity of 1.0 s. The major seismic hazard for Bucharest and for most of Southern and Eastern Romania is dominated by the Vrancea subcrustal seismic source. The ground motion prediction equation developed for subduction-type earthquakes and soil conditions by Youngs et al. (1997) is used for the computation of the Uniform Hazard Spectrum (UHS) and the CMS. The disaggregation of seismic hazard is then performed in order to determine the mean causal values of magnitude and source-to-site distance for a particular spectral ordinate (for a spectral period T = 1.0 s in this study). The spectral period of 1.0 s is considered to be representative for the new stock of residential and office reinforced concrete (RC) buildings in Bucharest. The differences between the Uniform Hazard Spectrum (UHS) and the Conditional Mean Spectrum (CMS) are discussed taking into account the scarcity of ground motions recorded in the region of Bucharest and the frequency content characteristics of the recorded data. Moreover, a record selection based on the criteria proposed by Baker and Cornell (2006) and Baker (2011) is performed using a dataset consisting of strong ground motions recorded during seven Vrancea seismic events.

• 한국음향학회지
• /
• 제41권1호
• /
• pp.38-44
• /
• 2022

잡음에 오염된 음성의 명료도와 음질을 향상시키고자 음성 향상을 수행한다. 본 연구에서는 복소값 스펙트럼을 이용한 마스크기반 음성 향상에서 시간 영역 손실함수와 주파수 영역 손실함수에 따른 학습 결과를 비교하였다. 시간 영역의 음성 파형과 주파수 영역의 스펙트럼의 세부정보를 고려해 두 영역의 장점을 활용할 수 있도록 손실함수 조합에 관해 연구를 진행하였다. 시간 영역 손실함수는 Scale Invariant-Source to Noise Ratio(SI-SNR)을 이용해 계산하고, 주파수 영역 손실함수는 복소값 스펙트럼과 크기 스펙트럼을 Mean Squared Error(MSE)로 계산하여 사용하였고, sin 함수를 이용해 위상에 대한 손실함수를 계산하였다. 손실함수 조합은 시간 영역 손실함수인 SI-SNR과 각 주파수 영역 손실함수를 조합하였다. 또한 크기 값과 위상 값을 모두 고려할 수 있도록 SI-SNR과 크기 스펙트럼, 위상에 관련된 손실함수들도 조합하여 실험을 진행하였다. 음성 향상 결과는 Source-to-Distortion Ratio(SDR), Perceptual Evaluation of Speech Quality(PESQ), Short-Time Objective Intelligibility(STOI)를이용해 성능 비교 평가를 진행하였다. 음성 향상 결과를 확인해보기 위해 스펙트럼 상에서 비교를 진행하였다. TIMIT 데이터베이스를 이용한 실험 결과, 시간 영역 또는 주파수 영역 손실함수보다 SI-SNR과 크기 스펙트럼을 조합한 손실함수를 사용하여 음성 향상을 학습했을 때 가장 높은 성능을 보였다.

• The Journal of the Acoustical Society of Korea
• /
• 제16권1E호
• /
• pp.24-28
• /
• 1997

Ultrasonic relaxation measurements for imidazole and its derivative in phosphate buffer exhibit a high peak of absorption at neutral pH. Near neutral pH, protolysis and hydrosis may be neglected and the essential reaction only consists of a direct proton-exchange. The kinetics constants and the volume changes for the proton transfer reaction with the protonated imidazole and 2-methylimidazole have been determined at 25℃. The kinetics constants are 7.2×108s-1M-1for imidazole and 1.7×108s-1M-1 for 2-methylimidazole. The kinetics constants are used to estimate the spectrum of relaxation times and acoustic relaxation amplitude associated with intermolecular and intramolecular proton-exchange reactions in bilogical media. It is concluded that the magnitude of the acoustic absorption reasonalbly attributable to the perturbation of proton-transfer equilibria between imidazole and inorganic phosphate is comparable in magnitude with the acoustic absorption observed in some intact tissues.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2335-2337
• /
• 1999

In this paper, using AE (Acoustic Emission) sensor the electrical and emitted-sound signals are measured by treeing breakdown in the epoxy resin, and the corresponding frequency spectrum of the AE signals are analyzed. We also examined the relationship between partial discharge magnitude and pulse number of AE signals to diagnose the deterioration of the electrical insulation due to treeing breakdown. From these results, a frequency band of AE signals through treeing breakdown was set to about 230 [kHz], and it appeared that pulse number of AE signal was proportional to partial discharge magnitude.