• 제목/요약/키워드: Magnitude Ratio

검색결과 848건 처리시간 0.022초

비율제한 및 과제제시방법에 따른 3, 4, 5세 유아의 비상징 수 비교능력 (An Investigation Into 3-, 4-, and 5-Year-Old Children's Nonsymbolic Magnitude Comparison Ability According to Ratio Limit and Task Condition)

  • 조우미;이순형
    • 아동학회지
    • /
    • 제38권1호
    • /
    • pp.117-126
    • /
    • 2017
  • Objective: The purpose of this study was to investigate young children's nonsymbolic magnitude comparison ability according to ratio limit and task condition. Methods: The participants included 40 3-year-old children, 42 4-year-old children, and 41 5-year-old children recruited from 4 childcare centers located in Seoul, Korea. All magnitude comparison tasks were composed of image material tasks and concrete material tasks. In addition, each magnitude comparison task varied with the ratio of the two quantities; 0.5 ratio, 0.67 ratio, 0.75 ratio. Results and Conclusion: The results revealed that 3-, 4-, and 5-year-old children could perform nonsymbolic magnitude comparison tasks without learning experiences. Also, 3-, 4-, and 5-year-old children could perform concrete material tasks better than image material tasks in nonsymbolic magnitude comparison tasks. Furthermore, children's performance on nonsymbolic magnitude comparison tasks indicated the ratio signature of the approximate number system. Children have a degree of numerical capacity prior to formal mathematics instruction. Also, children were influenced by task conditions or sense stimulus when they processed numerical information. Furthermore, the approximate number system can be used in understanding the ordinality of number.

Level Crossing과 DPCM을 사용한 유성음/무성음/묵음의 분류 (Voiced/Unvoiced/Silence Classification of Speech Signal by Level Crossing and DPCM)

  • 김진영;성굉모
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
    • /
    • pp.1615-1618
    • /
    • 1987
  • 시간 영역에서 만들어진 음성신호의 파라미터을 이용하여 주어진 음성신호의 구간이 유성음, 무성음, 혹은 묵음인지를 분류하는 새로운 알고리듬을 제시하였다. 이에 사용한 파라미터은 구간내에서 샘플링된 값의 절대치 합과 일정한 level 이상의 peak의 합(T-peak), T-peak와 절대치 합의 비 그리고, DPCM의 절대치 합들이다. 이를 파라미터를 이용하여 간단히 유성음/무성음/묵음 구간을 분류 할였다. This paper proposes new algorithm for classifying speech signal frame into voiced, unvoiced, silence frame, using the parameters extracted from time domain behavior of speech signal The parameters used in this paper are absolute magnitude, the sum of peaks lager than reference level (T-peak), the ratio of T-peak to absolute magnitude and the magnitude of signal outputs of DPCM. Using this parameters, speech signal is more easily classified into voiced/unvoiced/silence frame.

  • PDF

2 단 기어 감속기를 갖는 탐색기 짐발의 백래시 추정 (Backlash Estimation of a Seeker Gimbal with Two-Stage Gear Reducers)

  • 백주현;홍성민;곽윤근;김수현
    • 대한기계학회논문집A
    • /
    • 제26권10호
    • /
    • pp.2130-2141
    • /
    • 2002
  • A unique technique to estimate the magnitude or contribution ratio of each stage backlash in a system with a two-stage gear reducer is proposed. The concept to estimate the magnitude or contribution ratio of each stage backlash is based on the change of frequency response characteristic, in particular, the change of anti-resonant frequency and resonant frequency, due to the change of each stage backlash magnitude, even though the total backlash magnitude of a system with a two-stage gear reducer is constant. The validity of the technique is verified in a seeker gimbal and satisfactory results are obtained. It is thought that the diagnosis and maintenance of the manufacturing machines and systems with two-stage gear reducers will become more efficient and economical by virtue of the proposed technique.

지지점 간극을 갖는 다점지지 관의 지지점 간극 크기에 따른 감쇠특성 비교 (Loosely supported multi-span tube damping according to the support clearance)

  • 이강희;강흥석;신창환;김재용;이치영;박태정
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2014년도 추계학술대회 논문집
    • /
    • pp.402-403
    • /
    • 2014
  • Damping of multi-span tube with loose supports according to the finite support clearances is investigated through the experimental modal analysis. Loose intermediate support leads to strong nonlinearity in tube dynamics, provides statistical nature, and increases tube damping through impacting and friction at the supports. Fraction of critical damping was estimated by the modal curve fitting to parameter estimation from the measured frequency response functions. Magnitude of random excitation force, which can reproduce the in-situ excitation in operating environment, was maintained as constant value with a fine tolerance during vibration testing. Range of input force was carefully selected to cover from the low magnitude excitation for linearly behaved tube motion to high magnitude of force for nonlinearly-behaved tube motion. Estimated critical damping ratio shows scatters in data and tends to increase as the magnitude of rising force and decrease with upward frequency variation. Larger size of support gap increases multi-span tube damping for high magnitude of excitation.

  • PDF

Micro Fourier Rheometer에 의한 알루미나 그린 테이프의 Complex Modulus 측정 (Complex Modulus of Alumina Green Tapes Measured by Micro Fourier Rheometer)

  • 이정훈;이명현;김창은;김대준
    • 한국세라믹학회지
    • /
    • 제36권2호
    • /
    • pp.122-129
    • /
    • 1999
  • 알루미나 분말/(알루미나+결합체+가소제)의 비(X)와 결합체/(결합체+가소제)의 비(Y)를 각각 변화시켜 제조한 알루미나 그린 테이프의 complex modulus를 Micro Fourier Rheometer를 이용하여 측정하였다. X와 Y의 증가에 따라 Transfer function(TF) magnitude는 증가하고 Transfer function(TF) phase는 감소하는 경향을 보였으며 이로부터 X비와 Y비의 증가가 테이프의 탄성을 증가시켜는 요인임을 알 수 있었다. 온도가 증가함에 따라 알루미나 테이프의 TF magnitude는 작아지고 TF phase는 커지는 것으로부터 테이프의 점성이 증가함을 알 수 있었다. 특히 Y비에 따른 complex modulus의 변화는 유리전이온도와 관련이 있으며 변화값은 측정 조성 범위 내에서 X비에 의한 변화값보다 큼을 볼 수 있었다. complex modulus 측정을 통하여 알루미나 테이프의 성형이 가능하기 위해서는 TF phase 값이 17$^{\circ}$이상이어야 함을 유추할 수 있었다.

  • PDF

홍수유출율에 관한 수문학적 고찰 (Hydrological Review on the Fload Runoff ratio)

  • 이순혁;음성진;박명근
    • 한국농공학회지
    • /
    • 제27권4호
    • /
    • pp.42-52
    • /
    • 1985
  • This study was attempted to derivate empirical formulas for the runoff: ratio during ilood. season at three watersheds of Dan Yang, Chung Ju, and Yeo Ju are located at upper, middle, and lower portion of Nam Han river basin, respectively. Obtained formulas for flood runoff ratio can be applied as an element for the estimation, peak discharge for the design of various hydraulics structures which can be concidented with meteorological and topographical condition. The obtained through this study were analyzed as follows. 1.It was found that the magnitude of runoff ratio depends on the amount of rainfall for all studying basins. 2.Empirical formulas 'for the runoff' ratio were derivated as 1- 2,707 Rt0.345, 1-1.691 Rt0.242 and 1-1.807 Rt0.227 at Dan Yang, Chung Ju and Yeo Ju watershed, respectively. 3.The magnitude of runoff ratio was appeared in the order of Dan Yang, Chung Ju, and Yeo Ju are located at upper, middle and lower portion of Nam Han rivet basin, respectively. 4.It was assumed that in general the more it rains, the lesser becomes the ratio of loss rainfall. Especially, the ratio of loss rainfall for Dan Yang, upper portion of river basin was shown as the lowest among three watersheds. Besides, the magnitude of that was appeared in the order of Chung Ju and Yeo Ju watershed located at middle, and lower part of river basin, respectively. 5.Relative and standard errors of runoff ratio calculated by empirical formulas were shown to be within ten percent to the observed runoff ratio in all watersheds. 6.It is urgently essential that the effect of antecedent rainfall have an influence on the next coming flood should be studied in near future.

  • PDF

엔진-CVT 통합제어에 관한 연구(I) -통합제어 알고리즘 개발 (Study on Engine-CVT Consolidated Control(I) -Development of Consolidated Control Algorithm)

  • 김달철;김현수
    • 한국자동차공학회논문집
    • /
    • 제5권5호
    • /
    • pp.86-96
    • /
    • 1997
  • In this paper, engine-CVT consolidated control algorithm was developed. Engine -CVT control strategy suggested uses throttle control based on power difference and CVT ratio control based in CVT ratio map. Simulation results showed that the larger the rate of CVT ratio, the better the engine performance in the optimal operation line. Also, it was found that the engine performance where the magnitude of the acceleration changes abruptly depends on the magnitude of the rate of CVT ratio. Comparing the results of CVT control only without engine control, the engine-CVT control algorithm suggested in this work showed better performance demonstrating that the consolidated control algorithm should be required for the engine optimal operation.

  • PDF

MR감쇠기가 설치된 구조물의 등가선형 시스템에 대한 가진 특성의 영향 (Effects of excitation characteristics on the equivalent linear system of a building structure with MR dampers)

  • 박지훈;민경원;문병욱;박은천
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2006년도 학술발표회 논문집
    • /
    • pp.503-510
    • /
    • 2006
  • Seismic control performance of MR dampers, which have severe nonlinearity, differs with respect to the dynamic characteristics of an earthquake such as magnitude, frequency and duration. In this study, the effects of excitation characteristics on the equivalent linear system of a building structure with an MR damper are investigated through numerical analysis for artificial ground motions generated from different response spectrums. The equivalent damping ratio of the structure with an MR damper is calculated using Newmark and Hall's equations for ground motion amplification factors. It is found that the equivalent damping ratio of the structure with the MR damper is dependent on the ratio of the maximum friction force of the MR damper over excitation magnitude. Frequency contents of the earthquake ground motion affects the equivalent damping ratio of long-period structures considerably. Also, additional damping effect caused by interaction between the viscousity and friction of the MR damper is observed.

  • PDF

동일한 움직임 벡터들의 방향과 크기를 고려한 프레임율 증가기법 (Frame Rate Up-Conversion Considering The Direction and Magnitude of Identical Motion Vectors)

  • 박종근;정제창
    • 방송공학회논문지
    • /
    • 제20권6호
    • /
    • pp.880-887
    • /
    • 2015
  • 본 논문은 EBME(Extended Bilateral Motion Estimation) 알고리듬에서 동일한 움직임 벡터들의 방향과 크기를 고려한 알고리듬을 제안하였다. EBME는 BME(Bilateral Motion Estimation)보다 높은 연산량을 요구하기 때문에 프레임 내의 x, y방향 각각의 평균 움직임 벡터크기를 이용하여 동적프레임과 정적프레임을 판단하고, EBME 수행여부를 판단하여 연산량을 줄인다. 또한 동일한 움직임 벡터들의 방향과 크기를 비교하여 MVS(Motion Vector Smoothing)단계 수행여부를 판단함으로써 연산량을 줄인다. 제안하는 알고리듬을 적용한 실험 결과 기존의 EBME 알고리듬에 비해 수행시간은 단축되고 PSNR(Peak Signal to Noise Ratio)은 향상 되었다.

남한 지진의 지속시간과 H/V 비율 (The Duration and H/V ratio of the Ground Motion in Southern Korea)

  • 최호선;박창업;조남대
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2002년도 춘계 학술발표회 논문집
    • /
    • pp.42-50
    • /
    • 2002
  • The duration and H/V ratio(the amplitude ratio of the horizontal to vertical components) of ground motions caused by earthquakes in southern Korea are analyzed. Total 329 seismograms of horizontal component recorded at hypocentral distances of 10 to 350 km from 27 earthquakes with local magnitude 2 to 4 are used for the analysis. Simplified relation between the duration of ground motion( $T_{d}$) and the ratio($\chi$) of Arias intensity( $I_{A}$) and squared maximum acceleration($\alpha$$_{max}$$^{2}$) is determined to be $T_{d}$ = 3.423$\chi$$^2$+ 8.200$\chi$ + 0.029, which is useful for the estimation of the duration in southern Korea. There are three distinct distance ranges with different linear variations of the duration in hypocentral distance. They are distance intervals of 10~80km, 80~140km, and the distance greater than 140km. The duration in southern Korea shows clear proportionality to the local magnitude at magnitudes greater than 3.1. The value 1.37 of the H/V ratio obtained in southern Korea is similar to the value 1.4 of ENA(Eastern North America). The H/V ratio in southern Korea increases in the frequency range from 0.3 to 10Hz. The duration and H/V ratio of ground motions derived in this study could be used in the stochastic simulation of strong ground motion.ion.n.n.

  • PDF