• 한국통신학회논문지
• /
• 제28권4C호
• /
• pp.424-432
• /
• 2003

본 논문에서는 평활화 기법이 적용된 새로운 적응적 변이추정 알고리즘을 제시하고 이를 이용하여 스테레오 영상을 효과적으로 복원하는 방법을 제시하였다. 적응적 변이추정 방식은 기존 방식들에 비해 복원된 영상의 PSNR 이 크게 개선되는 것으로 분석되고 있지만 정합창의 크기가 입력 영상의 특징값에 따라 적응적으로 변하기 때문에 정합창이 겹쳐지거나 할당되지 않는 영역이 발생할 수 있다. 따라서, 본 논문에서는 기존의 적응력 변이추정 방식에 임계값을 설정하여 경계값을 보존하는 평활화 기법을 적용하여 보다 효율적인 스테레오 영상 복원기법을 제시하였다. 즉, 추정된 인접 변이벡터들 사이의 유사성을 이용하여 인접 변이 벡터들을 평활화해 줌으로써 기존의 적응적 정합창에서 발생했던 잘못된 변이벡터의 보정 뿐만 아니라 경계부분에서는 최적의 경계 보존값을 찾아 복원함으로써 보다 효율적인 예측영상의 복원이 가능하였다. CCETT의 'Man'과 'Claud' 영상을 사용한 실험 결과, 제안된 변이추정 기법에 의해 복원된 영상의 PSNR 기존의 화소기반에 비해 10.89dB, 6.13dB, 적응기반에 비해서는 1.41dB, 0.81dB 각각 개선됨이 분석되었다.

• Journal of Welding and Joining
• /
• 제21권1호
• /
• pp.54-59
• /
• 2003

In the present work, a formula for plate deformation produced by line heating, in terms of process parameters such as heat input and plate dimensions, is developed analytically using an eigenstrain concept. The residual deformation that was due to thermal process was depends on the magnitude and region of plastic strains at heating zone. The magnitude of plastic strains was determined by disk model and its region was calculated using the Rosenthal"s solution. The vertical displacement of the plate was analyzed by using an infinite laminated plate theory to consider a cuboidal inclusion with an eigenstrain. Comparison of the calculated results and experimental data shows the accuracy and validity of proposed method.thod.

• 소음진동
• /
• 제8권6호
• /
• pp.1037-1042
• /
• 1998

This paper discusses the dependence of the convergence rate on the acoustic error path in these popular algorithms and introduces new algorithms which increase the convergence region regardless of the time-delay in the acoustic error path. We also Propose a novel control algorithm (AFC/CAFC) for tonal noise cancellation. The proposed algorithm estimates the magnitude and phase of the tonal noise. The algorithm uses the steepest descent method for the phase/magnitude estimation. Performances of tile CAFC algorithm are presented in comparison with those by the AFC algorithm based on computer simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.451-451
• /
• 2000

This study aims for the optimization of process conditions in a fixed-bed catalytic reactor system with a circulating molten salt bath, in which partial oxidation of propylene to acrolein takes place. Two-dimensional pseudo-homogeneous model is adopted with estimation of suitable parameters and its validity is corroborated by comparing simulation result with experimental data. The temperature of the molten salt and the feed composition are found to exercise significant influence on the yield of acrolein and the magnitude of hot spot. The temperature of the molten salt is usually kept constant. This study, however, suggests that the temperature of the molten salt must be axially adjusted so that the abrupt peak of hot spot should not appear near the reactor entrance. The yield of acrolein is maximized and the position and the magnitude of hot spot are optimized by the method of the iterative dynamic programming (IDP).

• 한국시뮬레이션학회논문지
• /
• 제24권3호
• /
• pp.45-54
• /
• 2015

본 논문에서는 기어감속 서보시스템의 모터입력전압 크기를 적절히 감소시키면 모터입력전압에 대한 모터각속도에서 나타나는 주파수응답특성에 미치는 백래시 영향이 매우 커지게 됨을 보여 주였다. 또한 주파수응답선도에서 나타나는 반공진 및 공진주파수 변화량을 관찰하여 기어감속 서보시스템 내 기어 백래시 변화를 감지할 수 있는 방법의 유용성을 이론적, 시뮬레이션 및 실험적으로 검증하였다. 반공진주파수 변화가 공진주파수 변화 보다 안정적으로 계측될 수 있으므로 백래시 크기 변화감지 시 반공진주파수 변화량 관찰이 좀 더 유용하며, 공진주파수는 모터입력전압을 충분히 감속시켜야 급격한 변화를 관찰할 수 있음을 보여주었다. 본 연구는 기어감속 서보시스템 내 백래시 크기 변화 감지에 대한 향후 연구에 있어서 유용하게 사용될 수 있을 것이라고 생각한다.

• 한국음향학회지
• /
• 제24권7호
• /
• pp.402-409
• /
• 2005

본 논문에서는 고대역 (4kHz-8kHz)의 주기적 성분이 강하게 나타나는 신호에 대해서 MP (Matching Pursuit) 알고리즘을 이용한 부호화 방법을 제안한다. 또한 분석된 스펙트럼 크기 파라미터와 위상 파라미터의 효율적인 양자화 방법을 제안한다. MP 알고리즘은 오류 상쇄 원리와 정현파 모델에 바탕을 두고 있기 때문에 정확한 피치 주기 예측이 필요하다. 고대역의 정확한 피치 주기 예측을 위해 저대역 (0kHz-4kHz) 신호에서 검출한 피치 주기를 이용함으로써 부호화와 비트할당의 효율을 높일 수 있다. 스펙트럼 크기 계수의 양자화를 위해 계수들에 대해 고정 차원 이산코사인 변환 (MDCT : Modified Discrete Cosine Transform) 및 다단계 (multi-stage) 구조를 결합시킨 양자화 기법을 사용하였고, 위상 값들은 스펙트럼 크기에 따른 가중치 필터와 위상의 $2{\pi}$ 순환 특성을 이용하여 양자화하였다. 또한 제안한 양자화 기법과 부호화 방법을 음성 분석-합성 (analysis-by-synthesis) 시스템에 적용하여, 목적 신호와의 비교를 통해 검증한다. 향후 대역 분할을 기본 구조로 하는 계층 구조의 광대역 음성부호화기에의 적용 가능성을 제시한다.

• 대한산업공학회지
• /
• 제27권4호
• /
• pp.413-423
• /
• 2001

Low back disorders (LBDs) are one of the most common and costly work-related musculoskeletal disorders. One of the major possible risk factors of LBDs is to work with static and awkward trunk postures, especially in a complex trunk posture involving flexion, twisting and lateral bending simultaneously. This study is to examine the effect of complex trunk postures on the postural stresses using a psychophysical method. Twelve healthy male students participated in an experiment, in which 29 different trunk postures were evaluated using the magnitude estimation method. The results showed that subjective discomfort significantly increased as the levels of trunk flexion, lateral bending and rotation increased. Significant interaction effects were found between rotation and lateral bending or flexion when the severe lateral bending or rotation were assumed, indicating that simultaneous occurrence of trunk flexion, lateral bending and rotation increases discomfort ratings synergistically. A postural workload evaluation scheme of trunk postures was proposed based on the angular deviation levels from the neutral position. Each trunk posture was assigned numerical stress index depending upon its discomfort rating, which was defined as the ratio of discomfort of a posture to that of its neutral posture. Four qualitative action categories for the stress index were also provided in order to enable practitioners to apply corrective actions appropriately. The proposed scheme is expected to be applied to several field areas for evaluating trunk postural stresses.

• 한국소음진동공학회논문집
• /
• 제16권6호
• /
• pp.658-664
• /
• 2006

Shock vibrations are usually experienced in vehicles excited by impulsive input, such as bumps. The frequency weighting functions of the current standards in ISO 2631 and BS 6841 are to help objectively predict the amount of discomfort of stationary vibration. This experimental study was designed to develop frequency weighting shape for shock vibration having various fundamental frequencies from 0.5 to 16Hz. The specks were produced from the response of single. degree-of-freedom model to a half-sine force input. Fifteen subjects used the magnitude estimation method to judge the discomfort of vertical shock vibration generated on the rigid seat mounted on the simulator. The magnitudes of the shocks, expressed in terms of both peak-to-peak value and un-weighted vibration dose values (VDVs) , were correlated with magnitude estimates of the discomfort. The frequency weighting shapes from the correlation were developed and investigated having nonlinearity due to the magnitude of the shock.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.950-967
• /
• 1995

Acoustic holography makes it possible to reconstruct the acoustic field based on the measurement of the pressure distribution on the hologram surface. Because of the merit that one can obtain an entire three-dimensional wave field from the data recorded on a two-dimensional surface, the holographic method has been widely studied. Being an experimental method, holography has an unavoidable error which is generate by sampling in space and frequency domain and finite aperture size. Its magnitude is dependent on the space and frequency domain and finite aperture size. Its magnitude is dependent on the shape of hologram surface, acoustic holography may be classified into four types of holography : rectangular type planeholography, circular type plane holography, cylindrical holography and spherical holography. In this paper, four types of holography are studied by modal summation method. Numerical simulation is performed using a monopole source with varying parameters to find out effects to the estimation error in each holography. Experiments of circular type plane holography and cylindrical holography explain strong relation between the shape of hologram surface and the acoustic field.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.517-520
• /
• 1999

In this paper, we propose a non-invasive method to estimate blood velocity from the real medical images. To measure the magnitude and direction components associated with the blood velocity, we apply the optical flow analysis algorithm. It is demonstrated that the accuracy of the blood velocity estimate could possibly be increased by segmenting the optical flow region. We call this the Region Optical Flow(ROF) algorithm. We carried out some preliminary experiments using the aorta medical images, and corresponding regional optical flow diagrams are provided.