• Journal of Magnetics
• /
• 제8권4호
• /
• pp.138-141
• /
• 2003

$Ni_{0.65}Zn_{0.35}Fe_2O_4$thin films were prepared by using a sol-gel method. Their crystallographic, dielectric and magnetic properties were investigated as a function of Cu contents by means of an X-ray diffractometer (XRD), X-ray reflectivity, LCZ meter (NF2232), a vibrating sample magnetometer (VSM), and an atomic force microscope (AFM). From typical C-V measurements for $Ni_{0.65}Zn_{0.35}Fe_2O_4$ thin films on p-type silicon substrate, the surface charge density was calculated as 1.4 ${\mu}$C/$m^2$. The dielectric constant evaluated from the capacitance at the accumulation state was 28. The high $H_{c}$ and low $M_{sat}$ at x=0.0 and 0.1 were due to the growth of the ${\alpha}$-$Fe_2O_3$ phase having antiferromagnetic properties. The rapidly decreased $H_{c}$ and increased $M_{sat}$ at x=0.2 and 0.3 can be explained that the ${\alpha}$-$Fe_2O_3$ phases have completely disappeared at x=0.3 and so, non-magnetic defects are minimized. The $M_{sat}$ was slightly decreased and the $H_{c}$ was increased above at x=0.3 because the increase of grain boundary due to smaller grain size acts as defects during magnetization process.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.282-287
• /
• 1998

유리 기판위에 dc magnetron sputtering 방법으로 제작한Fe(50 $\AA$)/[Co(17 $\AA$)/Cu(24 $\AA$)]20 다층박막에 관하여 자기저항비의 기저층, 자성층, 비자성층의 증착률 및 열처리 의존성을 살펴보았다. 낮은 base 압력 중에서의 막의 증착은 Co/Cu 계면의 산화를 억제하여 자기저항비를 장가시켰다. 극대 자기저항비를 얻기위해 요구되는 증착률은 Fe는 1$\AA$)/s 이상, Cu는 2.8 $\AA$)/s 이었으며 Co는 증착률이 2 $\AA$/s 보다 높은 경우에 평탄한 자구형성을 이루어 자기적 향비가 높아지는 경향을 보였다. 40$0^{\circ}C$까지의 시료에 대한 역처리는 다층박막의 주기성을 유지한채 더 큰 결정립을 형성시켜 반강자성적으로 결합한 막의 부분이 증가함으로써 자기저항비를 증가시켰다.

• 한국자기학회지
• /
• 제9권1호
• /
• pp.29-34
• /
• 1999

자성 garnet Y2.5La0.5Fe5O12의 분말을 ethylene glycol을 용매로 이용한 sol-gel방식으로 합성하였다. 시료의 결정학적 및 자기적 성질을 x선 회절기(XRD), 진동시료 자화기(VSM), 그리고 Mossbauer 분광기를 이용하여 연구하였다. 분말의 경우 100$0^{\circ}C$에서 단일상의 garnet결정을 얻었으며 결정구조는 cubic구조이며 격자상수는 12.415$\AA$이었다. Mossbauer spectrum은 13K부터 700K까지 측정하였으며 Fe는 모두 +3가 상태로 16(a)와 24(d)site에 존재함을 확인하였다. spin wave 상수는 B3/2=0.32$\pm$0.05, C5/2=0.18$\pm$0.05였으며, Debye 온도는 24(d)site인 경우 382K 그리고 16(a) site인 경우 246K였다. VSM 실험으로부터 상온에서 포화 자화값(Ms)은 25emu/g이었다.

• 말소리와 음성과학
• /
• 제2권4호
• /
• pp.119-127
• /
• 2010

Recently, we have launched a large-scale articulatory study to investigate how the three-way contrastive stops (i.e., lenis, fortis, and aspirated) in Korean are kinematically expressed (i.e., in terms of articulatory movement characteristics) in various contexts, using a magnetometer (Electromagnetic Articulography). In this paper, we report some preliminary results about how the three-way bilabial series /p,$p^h,p^*$/ produced in /Ca/ context in isolation are kinematically characterized not only during the lip closure but also during the following vocalic articulation. Some important notes could be made from the results. First, the degree of lip constriction (as measured by the lip aperture between the upper and lower lips) was smaller for the lenis /p/ and larger for the fortis/aspirated /$p^*,p^h$/, showing a two-way distinction during the closure. Second, the tongue lowering for the following vowel was more extreme after the lenis /p/ than after the fortis/aspirated /$p^*,p^h$/. Regarding this vocalic articulatory difference in the tongue height, we discussed the possibility that the articulatory tension associated with the fortis/aspirated stops is further reflected in the lingual vocalic movement maintaining the tongue position to a certain level for the following vowel /a/, while the lenis consonant does not impose such articulatory constraints, resulting in more tongue lowering. Finally, the temporal relationship between the release of the stop closure and the lowest tongue position of the following vowel remained constant, suggesting that CV coordination is invariantly maintained across the consonant type. This pattern was interpreted as supporting the view that the consonant and vowel gestures are coordinated in much the same way across languages.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.183-186
• /
• 2016

In this study, we report on an investigation of proton radiation resistance of 410 martensitic stainless steels under 3 MeV proton with the doses ranging from $1.0{\times}10^{15}$ to $1.0{\times}10^{17}p/cm^2$ at the temperature 623 K. Vibrating sample magnetometer (VSM) and X-ray diffractometer (XRD) were used to study the variation of magnetic properties and structural damages by virtue of proton irradiation, respectively. VSM and XRD analysis revealed that the 410 martensitic stainless steels showed proton radiation resistance up to $10^{17}p/cm^2$. Proton energy degradation and flux attenuations in 410 stainless steels as a function of penetration depth were calculated by using Stopping and Range of Ions in Matter (SRIM) code. It suggested that the 410 stainless steels have the radiation resistance up to $5.2{\times}10^{-3}$ dpa which corresponds to neutron irradiation of $3.5{\times}10^{18}n/cm^2$. These results could be used to predict the maintenance period of SUS410 stainless steels in fission power plants.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.147-147
• /
• 2013

Multiferroic material $BiFeO_3$ (BFO) is a typical multiferroic material with a room-temperature magnetoelectric coupling in view of high magnetic- and ferroelectric-ordering temperatures (Neel temperature $T_N$ ~ 647 K and Curie temperature TC ~1,103 K). Rare-earth ion substitution at the Bi sites is very interesting, which induces suppressed volatility of the Bi ion and improved ferroelectric properties. At the same time, the Fe-site substitution with magnetic ions is also attracting, since the enhanced ferromagnetism was reported. In this study, BFO, $Bi_{0.9}Dy_{0.1}FeO_3$ (BDFO), $BiFe_{0.97}Co_{0.03}O_3$ (BFCO) and $Bi_{0.9}Dy_{0.1}Fe_{0.97}Co_{0.03}O_3 $ (BDFCO) compounds were prepared by conventional solid-state reaction and wet-mixing method. High-purity $Bi_2O_3$, $Dy_2O_3$, $Fe_2O_3$ and $Co_3O_4$ powders with the stoichiometric proportions were mixed, and calcined at $500^{\circ}C$ for 24 h. The samples were immediately put into an oven, which was heated up to 800oC and sintered in air for 1 h. The crystalline structure of samples was investigated at room temperature by using a Rigaku Miniflex powder diffractometer. The field-dependent magnetization measurements were performed with a vibrating-sample magnetometer. The electric polarization was measured at room temperature by using a standard ferroelectric tester (RT66B, Radiant Technologies). Dy and Co co-doping at the Bi and the Fe sites induce the enhancement of both magnetic and ferroelectric properties of $BiFeO_3$.

• 한국재료학회지
• /
• 제22권7호
• /
• pp.362-367
• /
• 2012

Magnetite nanoparticles(NPs) have been the subject of much interest by researchers owing to their potential use as magnetic carriers in drug targeting and as a tumor treatment in cases of hyperthermia. However, magnetite nanoparticles with 10 nm in diameter easily aggregate and thus create large secondary particles. To disperse magnetite nanoparticles, this study proposes the infiltration of magnetite nanoparticles into hybrid silica aerogels. The feasible dispersion of magnetite is necessary to target tumor cells and to treat hyperthermia. Magnetite NPs have been synthesized by coprecipitation, hydrothermal and thermal decomposition methods. In particular, monodisperse magnetite NPs are known to be produced by the thermal decomposition of iron oleate. In this study, we thermally decomposed iron acetylacetonate in the presence of oleic acid, oleylamine and 1,2 hexadecanediol. We also attempted to disperse magnetite NPs within a mesoporous aerogels. Methyltriethoxysilicate(MTEOS)-based hybrid silica aerogels were synthesized by a supercritical drying method. To incorporate the magnetite nanoparticles into the hybrid aerogels, we devised two methods: adding the synthesized aerogel into a magnetite precursor solution followed by nucleation and crystal growth within the pores of the aerogels, and the infiltration of magnetite nanoparticles synthesized beforehand into aerogel matrices by immersing the aerogels in a magnetite nanoparticle colloid solution. An analysis using a vibrating sample magnetometer showed that approximately 20% of the magnetite nanoparticles were well dispersed in the aerogels. The composite samples showed that heating under an inductive magnetic field to a temperature of $45^{\circ}C$ is possible.

• 대한기계학회논문집A
• /
• 제41권8호
• /
• pp.783-789
• /
• 2017

9축 IMMU기반의 3차원 자세추정에 있어 대표적인 정확성 저하요인은 가속도계 신호를 교란시키는 외부가속도와 지자기센서 신호와 관련된 자기교란이라는 두 가지 교란성분이다. 교란성분에 의한 영향을 최소화하기 위해 모델링기반 기법과 스위칭 기법이 제안되어 왔고, 이를 비교한 연구도 진행된 바 있다. 그러나 모델링기반 기법에서 모델링의 차이가 자세추정 성능에 미치는 영향에 대한 연구는 현재까지 발표된 바 없다. 본 논문은 교란성분 모델링이 IMMU기반 자세추정 정확성에 미치는 영향을 확인하기 위해, 모델링에 차이가 있는 최근 발표된 두 알고리즘을 다양한 시험조건에서 비교하였다. 이를 통해 교란성분 모델링의 차이는 진행잡음 공분산 행렬에 차이를 발생시키며, 이로 인해 자세추정 성능에 영향을 끼칠 수 있음을 확인할 수 있었다. 시험결과 두 알고리즘은 평균제곱근오차에서 롤 피치 요평균 $1.35^{\circ}$ 및 요성분 $3.63^{\circ}$의 차이를 발생시켰다.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1424-1432
• /
• 2016

A person often needs to visit a facility that have not been visited before. In this case, it is necessary to easily identify the building in which the facility is located. Indoor navigation is also important, as the person may get lost due to the complex structure of buildings. To solve these problems, this paper presents a mobile application which provides a user with indoor place information and indoor navigation. A user is requested to take a photograph of a building of interest or of the current location. Then, the proposed application identifies the building of interest or the current location of the user by utilizing an image matching technique. For fast matching, database filtering by using GPS/magnetometer data and pre-extraction of features for images in the database are utilized. In case of indoor navigation, the application provides the actual images of check points as well as the moving direction. Simulation results show that the proposed system successfully identifies the location of users and provides place information and indoor navigation.

• 대한원격탐사학회지
• /
• 제21권1호
• /
• pp.91-98
• /
• 2005

On board satellite magnetometer measures all possible magnetic components, such as the core and crustal components from the inner Earth, and magnetospheric, ionospheric and' its coupled components from the outer Earth. Due to its dipole and non-dipole features, separation of the respective component from the measurements is most difficult unless the comprehensive knowledge of each field characteristics and the consequent modeling methods are solidly constructed. Especially, regional long wavelength magnetic signals of the crust are strongly masked by the main field and dynamic external field and hence difficult to isolate in the satellite measurements. In particular, the un-modeled effects of the strong auroral external fields and the complicated behavior of the core field near the geomagnetic poles conspire to greatly reduce the crustal magnetic signal-to-noise ratio in the polar region relative to the rest of the Earth. We can, however, use spectral correlation theory to filter the static lithospheric and core field components from the dynamic external field effects that are closely related to the geomagnetic storms affecting ionospheric current disturbances. To help isolate regional lithospheric anomalies from core field components, the correlations between CHAMP magnetic anomalies and the pseudo-magnetic effects inferred from satellite gravity-derived crustal thickness variations can also be exploited, Isolation of long wavelengths resulted from the respective source is the key to understand and improve the models of the external magnetic components as well as of the lower crustal structures. We expect to model the external field variations that might also be affected by a sudden upheaval like tsunami by using our algorithm after isolating any internal field components.