• 전기학회논문지
• /
• 제66권12호
• /
• pp.1725-1731
• /
• 2017

In hysteresis simulation, the Preisach model is most widely used as the reliability. However, since the first-order transition curves used in the conventional Preisach model are very inconvenient for actual measurement, many researches have been made to simplify them. In this study, the minor loops obtained along the initial magnetization curve are used to obtain the Everett function used in the Preisach model. In other words, The Everett table is constructed by using the minor loops, and are applied to the magnetization dependent Preisach model to reconstruct the Everett table. In order to minimize the error, the spline interpolation method is used to complete the final Everett table and the hysteresis loop simulation is performed with the Everett table. Furthermore, it is applied to the inductor analysis to perform not only sinusoidal wave and square wave drive but also PWM wave drive considering hysteresis. The validity of the proposed method is confirmed by comparison with simulation and experiment.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1996년도 추계연구발표회 논문개요집
• /
• pp.108-109
• /
• 1996

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권3호
• /
• pp.118-123
• /
• 1999

This paper describes the finite element procedure including the magnetic hysteresis phenomena. The magnetization-dependent Preisach model is employed to simulate the magnetic hysteresis and applied to each elements. Magnetization is calculated by the Fibonacci search method for the applied field in the implementation of the magnetization-dependent model. This can calculate the magnetization very accurately with small iteration numbers. The magnetic field intensity and the magnetization corresponding to the magnetic flux density obtained by the finite element analysis(FEA) are computed at the same time under the condition that these balues must satisfy the constitutive equation. In order to reduce the total calculation cost, pseudo-permeability is used for the input for the FEA. It is found that the presented method is very useful in combining the hysteresis model with the finite element method.

• 한국자기학회지
• /
• 제7권2호
• /
• pp.109-116
• /
• 1997

교번 히스테리시스와 회전 히스테리시스를 동시에 고려할 수 있는 벡터 히스테리시스 모델을 이용하여, 회전 히스테리시스 특성을 갖는 전자계의 유한 요소 해석 알고리즘을 제안한다. 벡터 히스테리시스 모델은 자화의존 프라이자흐 모델에서 확장된 모델을 이용하였다. 회전 자계가 자성체에 가해진 경우, 각 요소에서의 자화값이 벡터 모델로 부터 구해지며, 이 값은 다시 유한요소 해석의 입력이 되어서 인가자계와 자화와의 지연각을 구할 수 있다. 실험 결과와의 비교를 통해, 제안된 방법이 회저자계의 영향을 받는 전자계 시스템의 자화 특성을 정확히 해석 할 수 있음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.15-17
• /
• 1995

Hysteresis motor is a synchronous machine which has simple structure and self-start characteristic but also has serious difficulties in numerical analysis. In this study, a finite element analysis for hysteresis motor considering the hysteresis characteristics is presented. The hysteresis model is the magnetization-dependent Preisach model which explains hysteresis phenomena very well. From this, we estimate the instantaneous torque, average torque and hysteresis loss of the rotor, considering slot and winding distribution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.580-583
• /
• 1992

In calculating the hysteresis loops with the Preisach model for ferromagnetism, Everett function is used generally. Because the Everett function is usually given as a table of the lattice-shaped, it is very difficult to directly obtain the Everest table from the data. Therefore this makes some defects in the calculation processes or the accuracy of the results. In this study, using the data sufficiently obtained from the experiment by drawing up the Everett table in the triangle-shaped, and applying the generalized hysteresis model in which the magnetization is depend on the sum of the applied magnetic field and the molecular field, it is shown that our proposal is acceptible in calculating the hysteresis processes.