• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1021-1022
• /
• 2011

This paper presents the double side PM synchronous motor/generator for core loss reduction in flywheel energy storage system. The use of double PM rotor causes the elimination of core loss in no-load state of machine. Because flywheel rotational speed is reduced by core loss, double PM rotor is very effective in flywheel system. This paper suggests two types of double side PM rotor, Halbach magnetized array and parallel magnetized array. And characteristic comparison according to thickness of rotor back core is performed.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.4
• /
• pp.221-225
• /
• 1999

This paper shows the parameters to affect the critical characteristic of YBaCuO superconducting bulk fabricated by MPMG (Melt Powdered Melt Growth)process. In order to investigate proper processing variables, the effect of the holding time at the melting temperature and that of the slow cooling time in $O_2\; ambient\; on\; the\; J_c$ were experimented. And then with the above obtained heat treatment conditions, the effects of addition of $Y_2BaCuO_5\; and\; Ag\; on\; the\; J_c$ were also investigated. A proper slow cooling time yields phase transformation from Tetragonal $(YBa_2Cu_3O_6)$ to Orthorhombic $(YBa_2Cu_3O_7)$ during an annealing time in $O_2$. Ag addition plays a role in increasing the $T_c\; and\; the J_c$, but the magnetization decreases. The $J_c$ and the magnetization increase with addition of Y211. $J_c$ of the sample added Ag 10wt% is superiorover 3000 G. Proper holding time, slow cooling time and amount of impurity addition are important parameters in fabricating the YBaCuO bulk by MPMG process with high $J_c$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.9
• /
• pp.1392-1399
• /
• 1997

In order to determine the Mode I stress intensity factor ($K_1$) experimentally by means of the alternating current potential drop(ACPD) technique, the change in potential drop due to load for a ferromagnetic material containing a two-dimensional surface crack was examined. The cause of the change in potential drop and the effect of the magnetic flux on the change in potential drop were clarified by using the measuring systems with and without removing the magnetic flux from the circumference of the specimen. To remove the magnetic flux, a new measuring system was made by utilizing the characteristic of coaxial transmission line. The change in potential drop in the case without magnetic flux in the air was caused by the change in electromagnetic properties near the crack tip due to magnetization. The relationship between the change in potential drop and the change in $K_I$ was linealized by demagnetization and was found to be independent of the crack length.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.237-244
• /
• 2014

In this paper, we presented a study on the design of permanent magnet rotor for exterior rotor type brushless direct current(BLDC) motor. To reduce the cogging torque and torque ripple, the specific shape and magnetization pattern of permanent magnets in BLDC motors are suggested. Firstly, four permanent magnet models with different shapes and magnetization arrays are presented. The results from the finite element method(FEM), the most effective model for reducing cogging torque and torque ripple was presented. In addition, to confirm the steady state performance, the torque-speed characteristic analysis has been performed with variable speed and load. Finally, the best permanent magnet model for reducing cogging torque and torque ripple with appropriate torque-speed performance was selected through the comparison according to the device volume.

• Economic and Environmental Geology
• /
• v.31 no.4
• /
• pp.325-338
• /
• 1998

105 oriented samples (19 matrix samples, 86 cobble samples) were collected from the Silla Coglomerate Formation in Jinju and Goryeong areas to clarify the regional remagnetization of Cretaceous Kyongsang supergroup. Both the alternating field and thermal demagnetizations were conducted for the collected samples. The characteristic remanent magnetizations of these samples divided into three types in the Silla Conglomerate Formation: The ingredient magnetic minerals are magnetite, hematite, or both magnetite and hematite in a specimen. The characteristic remanent directions of cobble samples did not clustered to any direction. And the characteristic remanent directions of interbedded sandstones in the Silla Conglomerate Formation is $D/I=20.6^{\circ}/54.5^{\circ}$ (${\alpha}_{95}=11.1^{\circ}$, k=48.8) after tilting correction, agree with previous paleomagnetic studies on the Hayang group. These results implied that conglomerate test was passed indicating no regional remagnetization in the studied area after deposition of the Silla Conglomerate Formation.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.395-404
• /
• 2014

We conducted the geophysical survey of possible hydrothermal vent sites at 2009, in the Lau Basin, the south western Pacific and analyzed the magnetic characteristics of TA19-1 and TA19-2 seamounts. TA19-1 is a cone-shaped seamount with a caldera summit. TA19-2 seamount is bigger and shows more complicated topography than TA19-1 seamount. TA19-2 has a large caldera, a summit in the west side of the caldera and several crests. Simple dipole anomalies with a high over the north and a low over the south occur in TA19-1 seamount. High magnetic anomalies are located in the northern flank and the summit of TA19-2 seamount and low anomalies around the summit and the caldera. The results of bathymetry and magnetic data suggest that TA19-2 seamount might have more complicated magmatic process than TA19-1. Low magnetization zones are located over the summit, the calderas and the caldera rims. The magnetization lows indicate that submarine hydrothermal vents, along faults and fracture zones, could have caused an alteration of magnetic minerals. The magnetization highs over the summit and the calderas might have been related with later magmatisms like volcanic sills, intrusions.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.29-33
• /
• 1993

Magnetoresistance was studied for the ferromagnetic tunneling junction in $Permalloy/Al_{2}O_{3}/Co$ prepared by evaporation in a vacuum of $1{\times}10^{-6}$Torr. We measured voltage-current characteristic and magnetic valve effect of prepared ferromagnetic tunneling junction sample. We investigated field-dependency of tunnel resistance by Wheat-stone bridge method and measured magnetic hysteresis curve by vibrating sample magnetometer. The tunneling is confirmed by measuring voltage-current characteristic. The hysteresis curve of magnetoresistance corresponds well with that of magnetization. The magnetoresistance ratio ${\Delta}R/R$ is 0.6% at room temperature.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.6
• /
• pp.265-272
• /
• 2008

In this paper, AC losses of long wire Bi-2223 tapes with different twist pitch of superconducting core were fabricated, measured and analyzed. These samples produced by a powder-in-tube method are multi-filamentary tape with Ag matrix. Also, it's produced by non-twist. The critical current measurement was carried out under the environment in Liquid nitrogen and in zero field by 4-prob method. And the Magnetic measurement was carried out under the environment of applied time-varying transport current by transport method. From experiment, the susceptibility measurements were conducted while cooling in a magnetic field. Flux loss measurements were conducted as a function of ramping rate, frequency and field direction. The AC flux loss increases as the twist-pitch of the tapes decreased, in agreement with the Norris Equation. Neutron-diffraction measurements have been carried out investigate the crystal structure, magnetic structures, and magnetic phase transitions in Bi-2223([Bi, Pb]:Sr:Ca:Cu:O).

• Journal of the Korean Ceramic Society
• /
• v.32 no.3
• /
• pp.289-294
• /
• 1995

As the results of the study on the effects of mixing time for raw materials to the electric and magnetic properties of Mg-ferrite, the fraction of spinel phase after calcination and the geometry density of sintered Mg-ferrite increased from 30% to 100% and from 2.5g/cc to 4.25g/cc respectively due to mixing-homobenity of raw materials. The AC resistivity of grains decreased and lattice parameter, saturation magnetization increased due to the increase in Fe+2 of sintered body. conclusively the characteristic of powder after calcination had strong influence on the microstructure, electric, and magnetic properties in Mg-ferrite sintered body.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2173-2178
• /
• 2010

The magnetization directions of a polar magnetized ferrite bonded magnet are analyzed by finite element method (FEM). The influence of the width of SmCo magnets for magnetic field generation is investigated. The surface flux densities of the polar anisotropic magnets are analyzed and compared according to the pole number and thickness of the magnets. And the electromotive force (EMF) values of brushless DC motors with the magnets are investigated. The validity of the analysis method is verified by comparing the analyzed results with measured ones.