• Economic and Environmental Geology
• /
• v.53 no.2
• /
• pp.183-196
• /
• 2020

This study aimed to recover native gold from the concentrate using microwave-nitric acid leaching and magnetic/hydro separation experiments. The insoluble-residue was filtered from leaching solution through microwave-nitric acid leaching experiment. As a result of the atomic absorption spectrometer(AAS) analysis of the filtered leaching solution, it was discovered that Au content was not eluted at all and it was observed from the back scattered electron(BSE) image that native gold was liberated in the insoluble-residue. When magnetic/hydro separation experiments were applied for the insoluble-residue, magnetic and non magnetic minerals were separtated from insoluble-residue. Magnetite was recovered from the magnetic minerals and as a result of applying the hydro separation experiment again for the non-magnetic mineral, native gold was recovered. The native gold was identified through the X-ray diffraction(XRD) analysis and BSE image.

• Journal of Korea Multimedia Society
• /
• v.24 no.5
• /
• pp.667-675
• /
• 2021

The treatments for symptoms of Alzheimer's disease are being provided and for the early diagnosis several researches are undergoing. In this regard, by using T1-weighted images several classification techniques had been proposed to distinguish among AD, MCI, and Healthy Control (HC) patients. In this paper, we also used some traditional Machine Learning (ML) approaches in order to diagnose the AD. This paper consists of an improvised feature selection method which is used to reduce the model complexity which accounted an issue while utilizing the ML approaches. In our presented work, combination of subcortical and cortical features of 308 subjects of ADNI dataset has been used to diagnose AD using structural magnetic resonance (sMRI) images. Three classification experiments were performed: binary classification. i.e., AD vs eMCI, AD vs lMCI, and AD vs HC. Proposed Feature Selection method consist of a combination of Principal Component Analysis and Recursive Feature Elimination method that has been used to reduce the dimension size and selection of best features simultaneously. Experiment on the dataset demonstrated that SVM is best suited for the AD vs lMCI, AD vs HC, and AD vs eMCI classification with the accuracy of 95.83%, 97.83%, and 97.87% respectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.12
• /
• pp.1330-1337
• /
• 2004

In this study, the equations of motion of a rigid rotor supported by magnetic bearings are derived via Hamilton's principle, and transformed to a state-space form for control purpose. The optimal motion control of rotor magnetic bearing system based on the LQR(linear quadratic regulator) theory is addressed. New schemes related to the selection of the state weighting matrix Q and the control weighting matrix R involved in the quadratic functional to be minimized are proposed. And the robust control of the system with an LMI(linear matrix inequality) based H$_{\infty}$ theory is dealt with in this paper. Loop shapings of TFM (transfer function matrix) are used to increase the performance of control capability of the system. The control abilities of LQR and H$_{\infty}$ controller are compared by simulation and experimental tests and show that the capability of H$_{\infty}$ controller is superior to that of LQR.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.3
• /
• pp.258-266
• /
• 2007

When the magnetic levitation system(MAGLEV) initially rise, The MAGLEV has a weak point that is very large variation of the electric current. In this paper, The author applied the multi-loop-control to stably control the magnetic levitation system(MAGLEV). The gains of the control algorithm were selected based on pole locations formulated from a prototype Bessel transfer function model. The design incorporate tradeoffs in DC-to-DC converter hard-ware para-meters and pole locations. In order to confirm the superiority of the proposed pole selection md controller, MATLAB simulation and experiment results are presented.

• Investigative Magnetic Resonance Imaging
• /
• v.25 no.2
• /
• pp.81-92
• /
• 2021

The role of neuroimaging in patients with acute ischemic stroke has been gradually increasing. The ultimate goal of stroke imaging is to make a streamlined imaging workflow for safe and efficient treatment based on optimized patient selection. In the era of multimodal comprehensive imaging in strokes, imaging based on computed tomography (CT) has been preferred for use in acute ischemic stroke, because, despite the unique strengths of magnetic resonance imaging (MRI), MRI has a longer scan duration than does CT-based imaging. However, recent improvements, such as multicoil technology and novel MRI acceleration techniques, including parallel imaging, simultaneous multi-section imaging, and compressed sensing, highlight the potential of comprehensive MR-based imaging for strokes. In this review, we discuss the role of stroke imaging in acute ischemic stroke management, as well as the strengths and limitations of MR-based imaging. Given these concepts, we review the current MR acceleration techniques that could be applied to stroke imaging and provide an overview of the previous research on each essential sequence: diffusion-weighted imaging, gradient-echo, fluid-attenuated inversion recovery, contrast-enhanced MR angiography, and MR perfusion imaging.

• Journal of Embryo Transfer
• /
• v.33 no.4
• /
• pp.327-336
• /
• 2018

To date, there are no protocols optimized to the effective separation of spermatogonial stem cells (SSCs) from testicular cells derived from mouse testes, thus hindering studies based on mouse SSCs. In this study, we aimed to determine the most efficient purification method for the isolation of SSCs from mouse testes among previously described techniques. Isolation of SSCs from testicular cells derived from mouse testes was conducted using four different techniques: differential plating (DP), magnetic-activated cell sorting (MACS) post-DP, MACS, and positive and negative selection double MACS. DP was performed for 1, 2, 4, 8, or 16 h, and MACS was performed using EpCAM ($MACS^{EpCAM}$), Thy1 ($MACS^{Thy1}$), or GFR ${\alpha}1$ ($MACS^{GFR{\alpha}1}$) antibodies. The purification efficiency of each method was analyzed by measuring the percentage of cells that stained positively for alkaline phosphatase. DP for 8 h, $MACS^{Thy1}$ post-DP for 8 h, $MACS^{GFR{\alpha}1}$, positive selection double $MACS^{GFR{\alpha}1/EpCAM}$, and negative selection double $MACS^{GFR{\alpha}1/{\alpha}-SMA}$ were identified as the optimal protocols for isolation of SSCs from mouse testicular cells. Comparison of the purification efficiencies of the optimized isolation protocols showed that, numerically, the highest purification efficiency was obtained using $MACS^{GFR{\alpha}1}$. Overall, our results indicate that $MACS^{GFR{\alpha}1}$ is an appropriate purification technique for the isolation of SSCs from mouse testicular cells.

• Investigative Magnetic Resonance Imaging
• /
• v.14 no.2
• /
• pp.87-94
• /
• 2010

Purpose : To calculate the appearance of the image distortion from metallic artifacts and to determine the location of a metallic needle from a distorted MR image. Materials and Methods : To examine metal artifacts, an infinite metal cylinder in a strong magnetic field are assumed. The cylinder’s axis leaned toward the magnetic field along some arbitrary angle. The Laplace equation for this situation was solved to investigate the magnetic field distortion, and the simulation was performed to evaluation the image artifact caused by both readout and slice-selection gradient field. Using the result of the calculation, the exact locations of the metal cylinder were calculated from acquired images. Results : The distances between the center and the folded point are measured from images and calculated. Percentage errors between the measured and calculated distance were less than 5%, except for one case. Conclusion : The simulation was successfully performed when the metal cylinder was skewed at an arbitrary tilted angle relative to the main magnetic field. This method will make it possible to monitor and guide both biopsy and surgery with real time MRI.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.460-465
• /
• 2013

This paper deals with an approach for the initial design of a permanent magnet motor for turrets with large diameters. The proposed design techniques are introduced as three stages. The first is the selection of a pole-slot combination, the second is the selection of the rotor topology, and the last is choosing the outermost dimensions. In every stage, a useful technique is described with considerations for effective fabrication and motor performance, and magnetic field computation is performed using the finite element method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.6 no.3
• /
• pp.1-7
• /
• 1969

The Series RC load is connected with the word line in an attempt to select with high speed the information from the coincident current magnetie memory core. By taking the small time constant of the RC load, the cycle time of the output pulse is shortened by about 2 microseconds to 3 micro seconds. For this purpose, the analytical study are accomplished and the optimum circuit parameters are determined. Furthermore, the thermal problems occuring from the high speed switching of the magnetic memory core have been clarified.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.987-992
• /
• 2000

In a high speed spindle system, it is very important to monitor the operation of the spindle to prevent catastrophic damage to the system. Widely used sensors for monitoring are eddy-current and capacitive types. These sensors provide high accuracy of monitoring, but their steep prices lead to expensive high speed spindle systems. The main goal of our research is to develop technology for producing high speed spindle system utilizing magnetic bearings. As active magnetic bearings require position sensors for feedback control, a noncontact position sensor is being developed as a part of this main goal. Once developed, it will contribute to affordable high speed spindle system. This paper describes the selection process of the sensor types and the design of the driving circuit. We also report the experimental results that characterize the static and dynamic performances of the inductive sensor.