• Title/Summary/Keyword: Magnetic induction

Search Result 582, Processing Time 0.022 seconds

A Study of Magnetic Properties in $Fe_{73.9}Cu_{1.0}Nb_{3.5}Si_{14.0}B_{7.6}$ by Magnetic Annelaing

  • Kim, Eng-Chan;Kim, Jin-Eui;Nam, Hyo-Duk
    • Transactions on Electrical and Electronic Materials
    • /
    • v.1 no.3
    • /
    • pp.29-33
    • /
    • 2000
  • The crystallographic and high frequency characteristics of $Fe_{73.9}Cu_{1.0}Nb_{3.5}Si_{14.0}B_{7.6}$ soft magnetic alloys were investigated under magnetic field annealing, The crystallization fraction of annealed samples with longitudinal magnetic fields is higher than that of samples without magnetic field. When the transverse magnetic field is applied, the crystallization fraction does not increases but decreases until $500^{circ}C$. It is found that for samples, the saturation induction are all same with 1.3 T. The coercive field of as-cast samples is 1.03 A/cm, but in annealed samples it decrease from 0.56 to 0.1A/cm with increasing annealing temperature from 400 to $550^{circ}C$. The squareness of annealed samples under transverse magnetic field has a small value than that of both without field and with longitudinal field annealing. It is noted that the magnetic field annealing with transverse direction to amorphous $Fe_{73.9}Cu_{1.0}Nb_{3.5}Si_{14.0}B_{7.6}$ profoundly influenced on the Mossbauer spectra in contrast to that with longitudinal direction and without magnetic field.

  • PDF

Analysis of Internal Quality and Magnetic Resonance Characteristics of Red Ginseng Using PCA (주성분 분석을 이용한 홍삼의 내부품질과 자기공명특성 분석)

  • 김성민;김철수
    • Journal of Biosystems Engineering
    • /
    • v.28 no.3
    • /
    • pp.261-268
    • /
    • 2003
  • Ten MHz pulsed NMR spectrometer was used to measure the magnetic resonance characteristics of Korean red ginseng. The difference in the internal structures of good and bad red ginsengs was examined by their NMR characteristics. Average values of $T_1$ and free induction decay(FID) ratios of under grade Korean red ginseng were the highest among the three groups categorized as normal, medium and under grades Korean red ginseng and average values of $T_2$ and $T_2$$^{*}$ of them were the lowest among the three groups. Principal component analysis(PCA) was used to observe the contribution of measured NMR values to the grade of Korean red ginseng. The measured $T_1$, $T_2$, $T_2$$^{*}$ and FID ratio of 79 Korean red ginsengs classified as normal grade, medium grade and under grade were examined using PCA analysis. Cumulative variance of PC1 through PC3 occupied more than 90% of total variance at first and second NMR measurement. Plots of PC scores for the most important PCs showed that normal red ginseng samples were distributed around the left region of PC1 axis and most of the undergrade red ginseng samples were scattered around the right region of PC1 axis.

Design and Fabrication of Printed Circuit Board (PCB) Integrated Energy Harvester (PCB 일체형 에너지 하베스터의 설계 및 제작)

  • Min, Chul Hong;Kim, Tae Seon
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.26 no.11
    • /
    • pp.846-851
    • /
    • 2013
  • Recently, energy harvesting technologies are considered as the great alternatives to reduce the dependency on secondary batteries. In this paper, we proposed PCB type energy harvester which can be directly integrated with other electronic components on same board. To form the three dimensional coil structure, two PCBs with patterned metal lines are solder bonded. For magnetic induction, inside of coil structure was filled with magnetic substance and rotary motioned external magnets are applied to near the harvester. The effects of metal wire width on PCB, thickness of magnetic substance, and frequency of rotary motion on energy harvesting performance are analyzed by computer simulation and experiments. Experimental results showed 29.89 ${\mu}W$ of power generation performance at the frequency of 5.2 Hz and it is shown that designed harvester can be effectively applied on vibration environment with very limited frequency.

Magnetic properties and crystal structures of $Sm_yGd_{2-y}Fe_{17-x}Si_x$ alloys prepared by induction melting

  • Nam Joong-Hee
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.16 no.1
    • /
    • pp.8-11
    • /
    • 2006
  • The magnetic properties and crystal structures of $Sm_yGd_{2-y}Fe_{17-x}Si_x$ alloys ($0\leq\;x\leq2\;and\;y=0\~1.67$) have been investigated using x-ray diffraction and magnetic measurements. The $Sm_yGd_{2-y}Fe_{17-x}Si_x$ specimens were crystallized to the rhombohedral $Th_2Zn_{17}-structure$ with less than $5mol\%$ of impurities. The unit cells of the mixed rare-earth samples are smaller than those of $Sm_2Fe_{17}\;and\;Gd_2Fe_{17}.$ For example, the $T_c\;of\;SmGdFe_{17}\;(255^{\circ}C)$ is approximately 160 and $800^{\circ}C)$ higher than that of $Sm_2Fe_{17}\;and\;Gd_2Fe_{17},$ respectively. The $T_cs$ measured for $Sm_yGd_{2-y}Fe_{17-x}Si_x$ samples, 280 to $290^{\circ}C)$, are among the highest values observed for a $R_2Fe_{17-x}M_x$ intermetallic where M is a substituent other than cobalt.