• Journal of Magnetics
• /
• 제8권1호
• /
• pp.70-73
• /
• 2003

We have developed a new tracking system of jaw movement. The system consists of two permanent NdFeB magnets and 32 elements of two-axial fluxgate sensor array, The two magnets are attached to head portion and front tooth. This system does not need any attachments of the head portion or mouth such as clutch or magnetic field sensor except magnets. The proposed system is applicable for five degree of freedom. Position accuracy within 2]m was achieved. We developed a 3D computer input device by using the above mentioned technique.

• 대한의용생체공학회:의공학회지
• /
• 제18권4호
• /
• pp.421-428
• /
• 1997

초전도양자간섭소자(SQUID)를 이용한 자장센서는 현재 개발된 자장센서중에서 감도가 가장 우수한 소자로서 인체의 두뇌에서 발생하는 매우 미약한 자장에 측정이 가능하다. 뇌자도측정은 현재 많이 사용되고 있는 전기적인 측정(뇌파, 뇌유발전위) 에 비해 공간분해능이 우수하고, fMRI나 PET에 비해서는 시간분해능이 우수하므로 뇌기능연구에 유용하게 사용될 수 있다. 본 연구에서는 뇌자도 측정을 위하여 4-채널 SQUID시스템을 개발하였다. 개발된 시스템의 주요 특징은 새로운 방식의 SQUID센서를 채택함으로서 간단한 회로로써 SQUID구동이 가능하도록 하였으며, 검출코일의 신뢰성을 향상시키기 위하여 집적화된 평면형 코일을 사용하였다. 외부 환경잡음을 소거하기 위하여 자기차폐실을 설치하였고, 개발된 SQUID 시스템을 이용하여 뇌의 청각령으로부터 발생하는 자기신호를 측정하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제17권4호
• /
• pp.20-27
• /
• 1993

Emulsified oily wastewater is generally hard to treat in separating oil and water by conventional separators. In this paper the magnetohydrodynamic water treatment device was used to separate oil from emulsified oily wastewater which contained high conductivity. The emulsified oil removal rates and economic ranges of oil separation at various factors were investigated to confirm the influence of the magnetic field in MHD water treatment device according to the characteristics of emulsion brake. Experimental results proved that the oil removal rates were proportional to Lorentz force which depends on the intensity of magnetic field, conductivity and velocity of wastewater.

• 대한물리의학회지
• /
• 제15권4호
• /
• pp.101-109
• /
• 2020

PURPOSE: This study investigates the therapeutic effect of a prototype of a hand rehabilitation device based on magnetic forces. METHODS: Using an electromagnet and permanent magnets, we developed an end effector type device that induces various movements of the finger in accordance with the magnetic field direction. A total of 26 subacute stroke patients were enrolled and assigned to two groups in this randomized controlled trial. The intervention group received 30 minutes hand rehabilitation therapy per day for 4 weeks, using the device developed by us. Conventional physical therapies were conducted equally twice a day, 30 minutes per session, during the same period in both groups. RESULTS: After 4 weeks, rate of the Wolf Motor Function Test as a primary outcome measure showed significant improvement in the intervention group as compared to control group(p = .036). Scores of the Manual Function Test and Fugl-Meyer Assessment of upper limb were also significantly increased in the intervention group as compared to control group(p = .038 and p = .042, respectively). Moreover, the Korean version of Modified Barthel Index tended to improve after subjecting to physical therapy in both groups. CONCLUSION: Our results indicate that the novel hand rehabilitation device developed using a magnetic force, improves the hand motor functions and activities of daily life in subacute stroke patients.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.9-14
• /
• 2016

본 논문에서는 인체 감지형 자기장 코일의 감지거리 13.4mm를 이용한 디지털 잠금장치 설계에 관한 연구를 하고자 한다. 현재 사용되는 디지털 잠금장치와는 다르게 실외 케이스는 기존의 고유번호 입력버튼, 조명, 보호 커버, 해당 pcb, 외곽 케이스, 데이터 전송 케이블 등이 삭제되고 구동전원 ON/OFF 스위치와 비상 단자로만 구성하였다. 실내 케이스는 내부에 설치 된 자기장 코일기판이 유리문 몸체에 밀착된 상태로 12mm 간격의 맞은편 실외에서 전송되는 전기적 저항 값을 감지하면 그에 대응하는 유도전류가 흐르게 된다. 이때, 해당 원형 코일의 주파수 변환이 이루어지면 자기장 코일은 센서의 역할을 수행하게 된다. 센서로서의 자기장 코일은 인체가 감지되기 전과 감지 후에 출력되는 발진 주파수의 크기 변화를 감지하고 2,000%이상 증폭시켜 디지털 신호로 변환 조합한 다음 전용 소프트웨어에 전송하여 내장된 고정 데이터와 비교하여 검색하는 역할을 한다. 연구결과 자기장 코일 $12.8{\emptyset}$ 기준으로 인체의 터치 면적에 따른 감지시간은 30% 대비 0.08sec, 80% 대비 0.03sec이며 감지거리는 13.4mm로 최고 수준으로 측정되었다.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.286-290
• /
• 2017

The effects of loss of torque on magnetic fluid seals with rotating-shafts and the general difficulty of studying magnetic fluid seals are the focus of this work. The mechanism underlying loss of torque on such seals is analyzed using theoretical methods that show that loss of torque can be affected by several factors, including the velocity of the rotating-shaft, the structure of the sealing device, the characteristics of the magnetic field, and the characteristics of the magnetic fluid. In this paper, a model of the loss of torque is established, and the results of finite element analysis and testing and simulations are analyzed. It is concluded that (i) the viscosity of the magnetic fluid increased with the intensity of the magnetic field within a certain range; (ii) when the magnetic fluid was saturated, the increase in loss of torque tended to gradually slow down; and (iii) although the axial active length of the magnetic fluid may decrease with increasing speed of the rotating-shaft, the loss of torque increased because of increasing friction.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권4호
• /
• pp.7-16
• /
• 2014

Rare-earth barium copper oxide (REBCO) coated conductor (CC) tapes have already been commercialized but still possess some issues in terms of manufacturing cost, anisotropic in-field performance, $I_c$ response to mechanical loads such as delamination, homogeneity of current transport property, and production length. Development on improving its performance properties to meet the needs in practical device applications is underway and simplification of the tape's architecture and manufacturing process are also being considered to enhance the performance-cost ratio. As compared to low temperature superconductors (LTS), high temperature superconductor (HTS) REBCO CC tapes provide a much wider range of operating temperature and a higher critical current density at 4.2 K making it more attractive in magnet and coil applications. The superior properties of the REBCO CC tapes under magnetic field have led to the development of superconducting magnets capable of producing field way above 23.5 T. In order to achieve its optimum performance, the electromechanical properties under different deformation modes and magnetic field should be evaluated for practical device design. This paper gives an overview of the effects of mechanical stress/strain on $I_c$ in HTS CC tapes due to uniaxial tension, bending deformation, transverse load, and including the electrical performance of a CC tape joint which were performed by our group at ANU in the last decade.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.384-389
• /
• 2011

The electric railway cars are operated by high voltage supply through the catenary wire. Also, numerous electric equipments operated by electric signal are distributed in the electric railway cars. Such electric equipments are exposed to EMI/EMC problems, and there is the possibility that the magnetic field due to the catenary wire current takes effect on the electromagnetic field in the electric railway cars which move under the catenary wire. There is the possibility that the electromagnetic interference generates in view of the operation of many electric equipments in the electric railway cars. There is the possibility that the communication device faults generate, and that the hazards on the human beings generate. In this paper, we predict the magnetic field around the catenary wire, and obtain the exact magnetic field distribution by comparing the analytic results and the numerical results. Finally, we confirmed the possibility of the passive loop mitigation by comparing the analytic results and the numerical results through the passive loop mitigation technique.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.283-284
• /
• 2008

The magnetic flux is generated by a vortex current which circulates around the vortex with a sense of rotation opposite to that of the diamagnetic screening surface current. When the external magnetic field was applied to the superconductor magnetometer, some regions of the magnetic sensor will be destroyed, especially the weak link regions and the defect regions. The destroyed regions will be increased with the increasing of the magnetic flux.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.188-189
• /
• 2002

One of the current goals in memory device developments is to realize a nonvolatile memory, i.e., the stored information maintains even when the power is turned off. The representative candidates for nonvolatile memories are magnetic random access memory (MRAM) and ferroelectric random access memory (FRAM). In order to achieve a high density memory in MRAM device, the external magnetic field should be localized in a tiny cell to control the direction of spontaneous magnetization. (omitted)