• 전기학회논문지
• /
• 제63권5호
• /
• pp.652-659
• /
• 2014

This paper deals with characteristic analysis of double sided permanent magnet linear generator using analytical method. We derived magnetic field solutions produced by permanent magnet and armature reaction based on the 2D polar coordinate and magnetic vector potential. based on the derived magnetic field solutions, Induced voltage is obtained when arbitrary sinusoidal input condition. In addition, electrical parameters such as back-EMF constant, resistance, and inductance are obtained. Finally, generating performance characteristic at the rated load and various load is examined by using equivalent circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1043-1045
• /
• 2004

This paper deals with the core loss calculation of a BLDC motor made of Soft Magnetic Composite material. Since the teeth of motor partially have overhang in axial direction, 3 - dimensional equivalent magnetic circuit network (3D-EMCN) is used as an analytical method to get flux density of each element. The total core loss is calculated with the magnetic flux density and core loss curves of the SMC material. The calculated result is compared with core loss of the motor without overhang in stator teeth.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.52-54
• /
• 2009

This paper deals with design parameters deduction and analysis of hybrid magnetic bearing. Using the solutions obtained from equivalent magnetic circuit, we predict the electromagnetic characteristics from permanent magnet and electromagnet and obtain the initial parameters. And then, using non-linear finite element analysis, a detailed design is performed considering saturation and asymmetry of flux density at the surface in order to meet requirements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.818-819
• /
• 2011

본 논문은 가변자속 기능을 가지는 Flux Switching Permanent Magnet (FSPM) 전동기의 전 자기적 등가회로를 이용한 특성해석방법을 다룬다. 우선 가변자속 기능을 갖는 FSPM 전동기의 구조와 동작원리를 설명하였다. 다음으로 오버행을 고려한 2-D유한요소 해석 모델을 이용하여 역기전력, 인덕턴스를 구하였다. 마지막으로 등가회로 해석을 통해 가변자속 운전 시 FSPM 전동기의 특성해석을 실시하였다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 1999년도 제1회 학술대회논문집(KIASC 1st conference 99)
• /
• pp.93-96
• /
• 1999

This paper deals with the quench characteristic analysis in high-Tc superconducting synchronous motor of five to six hundred watts capacity. First, the magnetic field distribution and ac losses of high-Tc superconducting motor with the additive flux damper circuit was derived and computer simulation was performed with the equivalent model using FEM. The simulation results show that the quench state lasts for about 0.3 seconds.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.717-718
• /
• 2015

전동기를 설계 시 자기등가회로법은 전동기의 세부 형상에 크게 구애를 받지 않기 때문에, 공간고조파법과 수치해석기법에 비해 유용하다. 이 논문에서는 Spoke type PMSM(Permanent Magnet Synchronous Motor)의 회전자 자기등가회로를 설계하였다. 회전자 자기등가회로를 통해, 마그네틱 토크 성분을 구성하는 공극자속밀도 수식을 이끌어 낼 수 있다. 이를 통해, Spoke type PMSM은 마그네틱 토크가 주 토크이기 때문에, 공극 자속밀도 및 형상치수비를 이용하여 전동기의 크기를 계산하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.43-45
• /
• 1999

This paper is presented about the development of magnetic levitation conveyor with a transverse flux linear synchronous motor (TFLSM). The TFLSM is proposed as the new type linear motor for the conveyor driving system. The flux density distribution. the thrust and etc. of TFLSM are analyzed by the finite element method. To analyze the dynamic characteristics of TFLSM, the parameter of equivalent circuit is calculated by the analytical method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.60-62
• /
• 2001

In this paper, a CAE system, $MotorPro^{(TM)}$, is presented for motor design. It is composed of equivalent magnetic circuit method and finite element method. It provides fully automated finite element method that takes only a few seconds to a few minutes. Using this system. 18kw brushless DC motor is dealt as design example.

• 한국자기학회지
• /
• 제6권1호
• /
• pp.40-47
• /
• 1996

본 논문에서는 영전식 magnetic lifter의 최적 설계 방법을 제시하였다. 등가 자기회로법으로 흡착시와 탈착시의 자장 해석 및 전자역 계산을 행하였고, 최적 설계를 위해 등가 자기회로법으로 해석된 흡착시의 전자력을 최대로 하는 lifter의 치수를 구하였다. 또한 흡착시의 전자력을 제한 조건으로 하여 lifter 전체의 부피를 최소로 하는 치수를 찾았다. 위 최적 설계를 위한 최적화 알고리즘으로는 (1+1) Evolution Strategy(ES)를 이용하였다. 또한 상용 자장해석 프로그램(MAXWELL)을 사용하여 얻은 결과와 위의 최적화 결과를 비교하여 본 논문의 최적화방법의 타당성을 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.230-235
• /
• 2017

When the characteristics of a linear induction motor (LIM) are analyzed using finite element analysis (FEA), it is desirable to set the voltage source as an input. If the voltage source is set as an input in FEA, the leakage inductance and primary resistance of the equivalent circuit must be entered by direct calculation, and the magnetizing inductance and secondary reaction effects are directly considered in FEA. Exact calculation is necessary because the primary winding resistance and leakage inductance directly entered will have a significant effect on the LIM output. Therefore, in this study, we accurately calculated the primary leakage inductance and analyzed the resulting LIM characteristics. We calculated the leakage inductance using an analytical equation and FEA, and we confirmed the accuracy by comparing the results with the value experimentally calculated using a manufactured model. We also analyzed the instrument performance and thrust of the LIM as a function of the difference in the leakage inductance. Finally, we present the conclusions on the precise analysis based on the calculation of the leakage inductance.