• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.447-450
• /
• 2004

The modeling circuit becomes more important in developing various magnetic devices regarding the fact that the competitive architecture and circuitry should be developed simultaneously. In this paper, we introduce a modeling circuit for hysteresis characteristic of a magnetic device, which is a major characteristic in the spin dependent magnetic material. This transistor-level model is conspicuous in that it can be usefully embodied in real circuits rather than conventional SPICE models are only for simulations.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.458-464
• /
• 2017

A magnetic tunnel junction (MTJ) based ternary content addressable memory (TCAM) is proposed which provides non-volatility. A unit cell of the TCAM has two MTJ's and 4.875 transistors, which allows the realization of TCAM in a small area. The equivalent resistance of parallel connected multiple unit cells is compared with the equivalent resistance of parallel connected multiple reference resistance, which provides the averaging effect of the variations of device characteristics. This averaging effect renders the proposed TCAM to be variation-tolerant. Using 65-nm CMOS model parameters, the operation of the proposed TCAM has been evaluated including the Monte-Carlo simulated variations of the device characteristics, the supply voltage variation, and the temperature variation. With the tunneling magnetoresistance ratio (TMR) of 1.5 and all the variations being included, the error probability of the search operation is found to be smaller than 0.033-%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.868-870
• /
• 2001

Salient pole rotor type single phase SRM(switched reluctance motor) can be use axial direction magnetic flux and radial direction magnetic flux at the same time. Then, it has higher energy density per unit volume and can be lessened the shaft length of motor or exciting magnetic force. Additionally, it's durability is good because it is simple structure and driving device. Prototype of Salient pole rotor type single phase SRM was fabricated by using parameters of three phase SRM and 3D FEM analysis. Also, driving device was fabricated for prototype. Speed and torque characteristic was confirmed through the experiments, and flux linkage, which is important parameter of SRM for generating torque, was measured. The induction emf was calculated by using ideal inductance graph and current graph. Calculated emf and measured emf was compared for confirming loss of prototype in this paper.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권5호
• /
• pp.512-517
• /
• 1996

본 고는 반도체 재료가 갖는 자기효과를 이용하여 자기센서의 종류 및 특성등에 대하여 서술하였다. 반도체 LSI의 응용분야가 확대됨에 따라서 반도체 센서를 이용한 극소형화, 고성능화, 저가격화, 다기능화등이 가능하게 되었다. 이러한 상황에서 반도체를 이용한 홀 소자나 자기저항 소자와 같은 자기센서 등을 주변회로와 일체화시킨 초소형 시스템에 대한 연구가 활발하다. 특히 화합물 반도체는 자기센서에 적합한 물리적인 특성을 갖고 있기 때문에, 자기센서로 효율을 나타내고 있다. 반도체의 미세가공기술의 발전과 LSI제조기술의 발전을 이용하여 센서의 집적화, 저가격화를 가능하게 하였으며, 다른 종류의 반도체 센서들을 자기센서와 함께 하나의 칩위에 장착할 수 있는 응용집적센서(Application-specific Integrated Sensor)가 더욱 중요한 역할을 할 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.723-725
• /
• 2001

Ion plating method using plasma is faster as several times than electron beam plating method in plating process. Recently, a variety of techniques for this method are being researched. In this paper to produce sheet plasma with high density for ion plating we designed magnetic circuit of MgO plating device consisting of solenoid coil, rectangular permanent magnet. And, we researched on the effect of those by analyzing magnetic field distribution using FEM.

• Journal of Welding and Joining
• /
• 제15권1호
• /
• pp.81-91
• /
• 1997

In this study, a magnetic sensor to make use of eddy current was developed to detect the weld seam of butt joint in the sheet metal arc welding. This system consist of the sensor device for detecting the weld line, the servo control device for driving the weld torch movement and the control unit. A signal processing was applied to smooth the output signal of the sensor. The weld joint was determined by using a 1st order differential method. To improve tracking accuracy of the system, moving average method which has an effect of proportional and weighted integral control was applied to a series of the weld joint positions obtained above. The weld line for tracking was generated by using data regeneration algorithm. Based on these results, each servo motor was controlled by pulse generator. From experimental results, it was revealed that this system has excellent detecting ability for weld line and seam tracking ability.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.57-63
• /
• 2009

Magneto-Rheological(MR) fluid composes of a base fluid and ferromagnetic particles less than tens of micrometer size dispersed in the fluid. It is called as a smart material because its rheological properties are changable by a magnetic field. Its important applications are active devices such as controllable dampers and controllable clutches. The merit of those products is that their functional characteristics are controllable such that they enable active control strategies. This paper proposes an idea for machine tool applications of the MR fluid clutch as a safety device for power transmission. FEM has been used for magnetic field analyses and the results are compared with some former experiments. Some design syntheses of the MR clutches are suggested and hopefully considered that it may be an effective safety device for power transmission of machine tools.

• Journal of Magnetics
• /
• 제8권1호
• /
• pp.50-59
• /
• 2003

Spatial light modulators (SLMs) are centrally important devices in volumetric recording, data Processing, Pattern recognition and other optical systems. Various types of reusable SLMs with two-dimensional pixel arrays have been intensively developed. Of these, magneto-optic spatial light modulators (MOSLMs) have advantages of high switching speed, robustness, nonvolatility, and radioactive resistance. In this article, we review recent development work on MOSLMs, mainly in relation to our own studies.

• Journal of Magnetics
• /
• 제8권1호
• /
• pp.70-73
• /
• 2003

We have developed a new tracking system of jaw movement. The system consists of two permanent NdFeB magnets and 32 elements of two-axial fluxgate sensor array, The two magnets are attached to head portion and front tooth. This system does not need any attachments of the head portion or mouth such as clutch or magnetic field sensor except magnets. The proposed system is applicable for five degree of freedom. Position accuracy within 2]m was achieved. We developed a 3D computer input device by using the above mentioned technique.

• 한국자기학회지
• /
• 제11권3호
• /
• pp.109-113
• /
• 2001

Presently, an inductor adapted at MMIC (Monolithic Microwave Integrated Circuit) which is used for cellular phone or PHS operates at quasi-microwave range over 800 MHz. However, a W-CDMA (Wideband Code Division Multiple Access) will use about 2 GHz range. Therefore magnetic film device should be compatible up to 2 GHz. We have deposited Co-Pd-Al-O system film using rf sputtering method which is expected up to 2 GHz, and investigated the effect of Pd content and magnetic field annealing. When Pd composition is 19%, Hk was 118 Oe, and ${\mu}$′showed flat frequency characteristics up to 1.5 GHz. The Q factor (=${\mu}$′/${\mu}$") was 23.3 at 1 GHz, 6.7 at 1.5 GHz and 1.5 at 2 GHz, respectively. Resonance frequency was 2 GHz. Therefore Co-Pd-Al-O thin film could be used at over 1 GHz, and also expected as an inductor material for wide band CDMA type cellular phone.