• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.902-904
• /
• 2004

PMA(Permanent Magnetic Actuator)는 기존의 유압식, 공압식 또는 스프링 조작기에 비해 신뢰성과 내구성이 뛰어나며, 유지${\cdot}$보수의 비용이 적고, 전류의 ON/OFF로 조작기를 쉽게 제어 할 수 있다. 그래서 최근 중저압 진공 차단기에 많이 사용되고 있다. 그러나 상대적으로 접점 간극이 길고, 압점력이 큰 고압 진공차단기에는 기존의 PMA(Permanent Magnetic Actuator)가 적합하지 않다. 고압 진공 차단기에 PMA를 적용시키기 위해서는 새로운 형상 설계가 불가피한데, 본 논문에서는 새로운 형태의 PMA(Permanent Magnetic Actuator)를 제안하고 그것의 동작 특성 해석을 통하여 사용 가능성을 검증하고자 한다.

• 한국소음진동공학회논문집
• /
• 제14권12호
• /
• pp.1255-1260
• /
• 2004

A moving-magnet type pickup actuator has an assembly error. That is, the actuating Part of an actuator is shifted from initial position after we assemble it into yoke. This Is the result of an effect of magnetic force between magnet and yoke. We performed magnetic-analysis using FEA. As a result of simulation, we improved the assembling efficiency for moving-magnet type actuator.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.356-362
• /
• 2007

Magnetostrictive materials have been used for linear actuators due to its large strain, large force output with moderate frequency band in the presence of magnetic field. However their performance analysis is difficult because of nonlinear material behaviors in terms of coupled strain-magnetic field dependence, nonlinear permeability, pre-stress dependence and hysteresis. This paper presents a finite element analysis technique for magnetostrictive linear actuator. To deal with coupled problems and nonlinear behaviors, a simple finite element approach is proposed, which is based on separate magnetic field calculation and displacement simulation. The finite element formulation and an in-house program development are illustrated, and a simulation model is made for a magnetostrictive linear actuator. The fabrication and performance test of the linear actuator are explained, and the performance comparison with simulation result is shown. Since this approach is simple, it can be applied for analyzing magnetostrictive underwater projectors and ultrasonic transducers.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 춘계학술대회 논문집
• /
• pp.155-160
• /
• 2003

It is very important to make an intensive control of burr and surface roughness in the actuator arm of HDD for personal computer. There are two finishing techniques for actuator arm mechanical and chemical method. Centrifugal barrelling and magnetic deburring are mechanical methods, and electrolysis finish is a chemical method. Centrifugal barrelling and magnetic deburring are widely used due to the excellence in convenience and mass production. In this study, characteristics of surface roughness and deburring effect in magnetic deburring and centrifugal barrelling are investigated, and their performance of finishing is compared.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.356-361
• /
• 2004

가동자석형 픽업 구동기를 조립하는 경우 조립 전후에 오차가 발생하게 된다. 즉, 렌즈홀더 와 스프링홀더 A'SSY 를 요크에 조립하기 전자 후에 렌즈홀더가 shift 된 양을 살펴보면 상당한 편차가 있음을 볼 수 있다. 이것은 자석 중심과 요크 중심이 어긋날 경우 자석과 요크 사이에 발생하는 자기력의 영향으로 발생하는 것으로, 자기해석을 수행한 결과 자석과 요크의 크기에 따라 자기력의 영향이 달라짐을 확인할 수 있었고, 개발모델에 적용하여 조립성능이 향상됨을 확인할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.102-107
• /
• 2012

In this study, the design procedure of hybrid active mount by an electro-magnetic actuator is proposed to reduce the transmitted force from naval shipboard equipment to ship hull structure. The hybrid type mount which is composed of a passive rubber element and an electro-magnetic actuator is introduced and, through the vibration measurement for the objective pump system, the required force of the actuator is computed and discussed in detail. The initial designs were supposed for three types, one is moving coil type actuator and the others are moving permanent magnet type actuators. Based on the initial design concept, the final designs considering shock resistance and interference with mover and stator are proposed and examined.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.579-584
• /
• 2003

Solenoid type magnetic actuator is the device, which could translate the electromagnetic energy to mechanical force. The force generated by magnetic flux, could be calculated by Maxwell stress tensor method. Maxwell stress tensor method is influenced by the magnetic flux path. Thus, magnetic force could be improved by modification of the iron case, which is the route of the magnetic flux. Modified design is obtained by parameter optimization using by Response surface methodology.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.337-338
• /
• 2007

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.261-266
• /
• 1998

In this study, the in-situ parameter identification method for active magnetic bearing (AMB) actuator based on an open-loop balancing scheme is proposed. The scheme utilizes the relation between the compensating voltage and the known unbalance force. Main advantage of this method is that it is easy to use, yet it gives the actuator dynamics on the actual operating condition of an AMB system. The experimental results show that the proposed scheme compensates the known unbalance accurately and consequently identifies the actuator dynamics effectively.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권2호
• /
• pp.123-128
• /
• 2005

This paper presents an analysis of the permanent magnet overhang effect for the permanent magnetic actuator. Generally, the overhang is often used to increase the force density in permanent magnet machineries. The overhang is particularly profitable in reducing the volume after increasing the force density per volume when using the overhang effect of the permanent magnet. Therefore, the 3D Equivalent Magnetic Circuit Network Method (3D EMCN) has been used in this paper. According to the plunger position, the flux distribution per overhang length and the holding force are quantitatively compared. Furthermore, an appropriate length of the overhang has been proposed. To confirm the accuracy of the analysis method, the results of 2D FEM and 3D FEM are compared for the basic model.