• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.3-3
• /
• 2009

In order to investigate the possibility of using mixed rare earth $(Nd_{1/3}Eu_{1/3}Gd_{1/3})Ba_2Cu_3O_{7-x}$ (NEG123) as the superconducting layer of the HTS coated conductor, the NEG123 thin film was deposited epitaxialy on LAO(100) single crystal and IBAD_YSZ metal templates by pulsed laser deposition. Systematic studies were carried out to investigate the influences of deposition parameters of PLD on the micro structure, texture and superconducting properties of NEG-123 coated conductor. Deposition at oxygen partial pressure of 600 mTorr was needed to routinely obtain high quality NEG123 films with $J_c$'s (77K) over 2 MA/$cm^2$ and Tc's over 90K (${\Delta}T{\sim}2\;K$). We verified from magnetization study that the NEG123 has an improved in-field Jc as the field increases at temperatures between 10 K and 77 K compared with Gd123. The $J_c$ (77K, self field) and the value of onset $T_c$ of NEG123 thin film on LAO substrate was $4.0MA/cm^2$ and 92K, respectively. This is the first report, to the best of our knowledge, of coated conductors with NEG123 film as the superconducting layer which have Ic and Jc over 40 A/cm-width and 1.6 MA/$cm^2$ at 77K, self field. This study shows the possibility of using NEG123 film as the superconducting layer of the HTS coated conductor which can be used in high magnetic field power electric devices.

• 한국자기학회지
• /
• 제26권6호
• /
• pp.179-184
• /
• 2016

스핀전달토크(Spin-Transfer Torque: STT) MRAM의 상용화를 위해서는 낮은 반전전류와 높은 열적 안정성을 동시에 만족해야 하고, 이를 위해서는 큰 스핀 분극, 강한 수직자기이방성 에너지을 가지는 물질이 요구된다. 본 연구에서는 STT-MRAM에 적합한 물질로 알려진 B2 CoFe 면심에 X(O, F, S, Cl) 원자가 위치한 $CoFeX_3$ 합금의 전자구조와 자기결정이방성(Magnetocrystalline anisotropy: MCA) 에너지를 계산하였다. X 원자가 F나 Cl일 때는 페르미 준위에서의 스핀 분극율이 각각 97 %, 96 %로, 반쪽 금속에 근접한 전자구조를 가짐을 확인할 수 있었다. 뿐만 아니라 표면이 Co 원자로 끝나는 5층 박막은 모든 X에 대해 수직 자기이방성를 가졌으며, 특히 $CoFeCl_3$의 자기이방성 에너지는 약 1.0 meV/cell로 상당히 컸다. 따라서 6, 7 족 원소를 잘 활용하면 높은 스핀 분극율과 강한 수직 자기이방성를 동시에 가지는 물질을 제조할 수 있게 되어 STT-MRAM의 상용화에 기여를 할 수 있을 것으로 기대한다.

• 한국자기학회지
• /
• 제16권1호
• /
• pp.23-27
• /
• 2006

역스피넬 산화물 $CoFe_2O_4$에서 Co를 Mn 또는 Cr클 치환하여 얻어지는 $Mn_xCo_{1-x}Fe_2O_4$ 및 $Cr_xCo_{1-x}Fe_2P_4$ 박막시료 들을 졸-겔 방법을 이용하여 제작하고 그 구조적, 자기적 특성들을 비교분석 하였다. X-ray diffraction 측정 결과, Mn 치환의 경우는 치환량의 증가에 따라 격자상수가 증가하였지만 Cr치환의 경우는 격자상수가 거의 변화하지 않음이 관측되었다. 이와 같은 결과는 Mn 치환의 경우 팔면체 자리의 Co이온과 같은 원자가 +2를 가지게 되는 것으로 설명 가능하며 Cr치환의 경우는 +3을 가지게 되어 같은 양의 $Fe^{3+}$이온들의 $Fe^{2+}$로의 환원이 발생하는 것으로 설명되어질 수 있다. $Cr_Co_{1-x}Fe_2O_4$박막들에 대한 Mossbauer 스펙트럼 측정 결과 사면체 자리에 $Fe^{2+}$이온의 존재가 관측되었으며 이는 $Cr^{3+}$이온의 팔면체 자리 치환에 의하여 야기되는 사면체 자리의 $Fe^{3+}{\rightarrow}Fe^{2+}$ 환원에 의한 것으로 해석된다. 반면에 $Mn_xCo_{1-x}Fe_2O_4$ 박막들에 대한 Mossbauer스펙트럼 측정 결과, $Fe^{2+}$ 이온의 존재는 관측되지 않았으며 Mn 치환량이 큰 경우 (>0.47)팔면체 자리의 $Fe^{3+}$이온들의 사면체 자리로의 이동이 관측되었다. 박막들에 대한 진동시료자화(vibrating sample magnetometry)측정 결과, Mn, Cr 치환의 경우 모두 $CoFe_2O_4$와 비교하여 포화자화량이 증가함이 나타났으며 치환에 관여한 이온들 간의 스핀 자기 능률 크기의 비교를 통하여 그 정성적인 설명이 가능하다.

• 전기화학회지
• /
• 제8권3호
• /
• pp.139-145
• /
• 2005

전자싸이크로트론공명(ECR: Electro Cyclotron Resonance)상온화학증착법에 의해 PET 폴리머기판위에 $SnO_x$ 박막을 제조하고, Sn의 전구체인 TMT(Tetra-methyl Tin)에 대한 산소와 수소의 몰 비 변화가 박막의 특성에 미치는 영향을 조사하였다 비화학양론적인 결합에 의해 성장된 투명 주석 산화막은 주입되는 산소/TMT, 수소/TMT몰 비에 의하여 조성비가 결정되고, 결정된 조성비에 의해 전기적 성질이 결정되는 것을 확인할 수 있었다. 산소/TMT의 몰 비 변화에 대하여 PET(polyethylene terephthalate)에 증착된 $SnO_x$ 박막의 최적 조성비는 1:2.4이다. 조성비는 반응에 참가하는 산소의 양이 증가할수록 점차적으로 증가하고, 과량의 몰 비로 산소가 주입될 경우 박막내의 Sn과 결합하지 않고 잉여 산소전하밀도를 증가시켜 bulk한 박막을 형성해 전기 비저항을 증가시키는 주요 원인이 된다. 수소/TMT의 몰 비는 산소 몰 비와 같이 증착되는 $SnO_x$의 몰 비에 영향을 주어 조성비를 변화시킴으로서 전기비저항을 결정하는데 크게 기여한다. 반응기내에 공급되는 수소량이 적으면 TMT의 불완전한 분해를 초래하여 반응에 필요한 $Sn^+$ 이온농도가 낮아지게 되고,상대적으로 잉여 산소함량이 증가하면서 높은 저항을 나타낸다. 임계값 이상으로 많은 양의 수소를 공급하면 플라즈마 내에 존재하는 $O^-$ 이온을 환원시켜 주석 산화막의 형성에 필요한 $O^-$ 이온의 감소로 전기저항이 오히려 증가하게 된다. 따라서 박막의 Sn:O의 조성비는 주입되는 산소량이 증가할수록 더욱 큰 값을 갖게 되고, 주입되는 수소량이 증가할수록 작은 값을 갖게 된다. 본 연구범위에서 TMP에 대한 산소의 몰 비는 80배, 수소의 몰 비는 40배일 때 가장 투명도와 전기전도도를 지니는 박막 특성을 나타내었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.77-77
• /
• 1998

Present silicon dioxide (SiOz) 떠m as intennetal dielectridIMD) layers will result in high parasitic c capacitance and crosstalk interference in 비gh density devices. Low dielectric materials such as f f1uorina뼈 silicon oxide(SiOF) and f1uoropolymer IMD layers have been tried to s이ve this problem. I In the SiOF ftlm, as fluorine concentration increases the dielectric constant of t뼈 film decreases but i it becomes unstable and wa않r absorptivity increases. The dielectric constant above 3.0 is obtain어 i in these ftlms. Fluoropolymers such as polyte$\sigma$따luoroethylene(PTFE) are known as low dielectric c constant (>2.0) materials. However, their $\alpha$)Or thermal stability and low adhesive fa$\pi$e have h hindered 야1리ru뚱 as IMD ma따"ials. 1 The concept of a plasma processing a찌Jaratus with 비gh density plasma at low pressure has r received much attention for deposition because films made in these plasma reactors have many a advantages such as go여 film quality and gap filling profile. High ion flux with low ion energy in m the high density plasma make the low contamination and go어 $\sigma$'Oss피lked ftlm. Especially the h helicon plasma reactor have attractive features for ftlm deposition 야~au똥 of i앙 high density plasma p production compared with other conventional type plasma soun:es. I In this pa야Jr, we present the results on the low dielectric constant fluorocarbonated-SiOF film d밑JOsited on p-Si(loo) 5 inch silicon substrates with 00% of 0dFTES gas mixture and 20% of Ar g gas in a helicon plasma reactor. High density 띠asma is generated in the conventional helicon p plasma soun:e with Nagoya type ill antenna, 5-15 MHz and 1 kW RF power, 700 Gauss of m magnetic field, and 1.5 mTorr of pressure. The electron density and temperature of the 0dFTES d discharge are measUI벼 by Langmuir probe. The relative density of radicals are measured by optic허 e emission spe따'Oscopy(OES). Chemical bonding structure 3I피 atomic concentration 따'C characterized u using fourier transform infrared(FTIR) s야3띠"Oscopy and X -ray photonelectron spl:’따'Oscopy (XPS). D Dielectric constant is measured using a metal insulator semiconductor (MIS;AVO.4 $\mu$ m thick f fIlmlp-SD s$\sigma$ucture. A chemical stoichiome$\sigma$y of 야Ie fluorocarbina$textsc{k}$영-SiOF film 따~si야영 at room temperature, which t the flow rate of Oz and FTES gas is Isccm and 6sccm, res야~tvely, is form려 야Ie SiouFo.36Co.14. A d dielec$\sigma$ic constant of this fIlm is 2.8, but the s$\alpha$'!Cimen at annealed 5OOt: is obtain려 3.24, and the s stepcoverage in the 0.4 $\mu$ m and 0.5 $\mu$ m pattern 킹'C above 92% and 91% without void, res야~tively. res야~tively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.100-101
• /
• 2012

The plasma damage free and room temperature processedthin film deposition technology is essential for realization of various next generation organic microelectronic devices such as flexible AMOLED display, flexible OLED lighting, and organic photovoltaic cells because characteristics of fragile organic materials in the plasma process and low glass transition temperatures (Tg) of polymer substrate. In case of directly deposition of metal oxide thin films (including transparent conductive oxide (TCO) and amorphous oxide semiconductor (AOS)) on the organic layers, plasma damages against to the organic materials is fatal. This damage is believed to be originated mainly from high energy energetic particles during the sputtering process such as negative oxygen ions, reflected neutrals by reflection of plasma background gas at the target surface, sputtered atoms, bulk plasma ions, and secondary electrons. To solve this problem, we developed the NBAS (Neutral Beam Assisted Sputtering) process as a plasma damage free and room temperature processed sputtering technology. As a result, electro-optical properties of NBAS processed ITO thin film showed resistivity of $4.0{\times}10^{-4}{\Omega}{\cdot}m$ and high transmittance (>90% at 550 nm) with nano- crystalline structure at room temperature process. Furthermore, in the experiment result of directly deposition of TCO top anode on the inverted structure OLED cell, it is verified that NBAS TCO deposition process does not damages to the underlying organic layers. In case of deposition of transparent conductive oxide (TCO) thin film on the plastic polymer substrate, the room temperature processed sputtering coating of high quality TCO thin film is required. During the sputtering process with higher density plasma, the energetic particles contribute self supplying of activation & crystallization energy without any additional heating and post-annealing and forminga high quality TCO thin film. However, negative oxygen ions which generated from sputteringtarget surface by electron attachment are accelerated to high energy by induced cathode self-bias. Thus the high energy negative oxygen ions can lead to critical physical bombardment damages to forming oxide thin film and this effect does not recover in room temperature process without post thermal annealing. To salve the inherent limitation of plasma sputtering, we have been developed the Magnetic Field Shielded Sputtering (MFSS) process as the high quality oxide thin film deposition process at room temperature. The MFSS process is effectively eliminate or suppress the negative oxygen ions bombardment damage by the plasma limiter which composed permanent magnet array. As a result, electro-optical properties of MFSS processed ITO thin film (resistivity $3.9{\times}10^{-4}{\Omega}{\cdot}cm$, transmittance 95% at 550 nm) have approachedthose of a high temperature DC magnetron sputtering (DMS) ITO thin film were. Also, AOS (a-IGZO) TFTs fabricated by MFSS process without higher temperature post annealing showed very comparable electrical performance with those by DMS process with $400^{\circ}C$ post annealing. They are important to note that the bombardment of a negative oxygen ion which is accelerated by dc self-bias during rf sputtering could degrade the electrical performance of ITO electrodes and a-IGZO TFTs. Finally, we found that reduction of damage from the high energy negative oxygen ions bombardment drives improvement of crystalline structure in the ITO thin film and suppression of the sub-gab states in a-IGZO semiconductor thin film. For realization of organic flexible electronic devices based on plastic substrates, gas barrier coatings are required to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency flexible AMOLEDs needs an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}gm^{-2}day^{-1}$. The key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required (under ${\sim}10^{-6}gm^{-2}day^{-1}$) is the suppression of nano-sized defect sites and gas diffusion pathways among the grain boundaries. For formation of high quality single inorganic gas barrier layer, we developed high density nano-structured Al2O3 single gas barrier layer usinga NBAS process. The NBAS process can continuously change crystalline structures from an amorphous phase to a nano- crystalline phase with various grain sizes in a single inorganic thin film. As a result, the water vapor transmission rates (WVTR) of the NBAS processed $Al_2O_3$ gas barrier film have improved order of magnitude compared with that of conventional $Al_2O_3$ layers made by the RF magnetron sputteringprocess under the same sputtering conditions; the WVTR of the NBAS processed $Al_2O_3$ gas barrier film was about $5{\times}10^{-6}g/m^2/day$ by just single layer.