• Design & Manufacturing
• /
• 제2권6호
• /
• pp.11-16
• /
• 2008

In order to satisfy the customer's variant needs for a product quality in recent years, a demand for developing higher precision machining technologies in a lot of application areas such as automobile, cellular phone and semiconductor has been increased more and more. Micro-magnetic induced polishing(${\mu}-MIP$) process is one of these precision technologies. In this study, to verify the parameters' effect of the ${\mu}-MIP$ process on the surface roughness improvement of the inclined workpiece, well planned experiment which was called the design of experiments was carried out. Considered parameters were spindle speed, inductor current, abrasive configuration and working gap between the workpiece and the solid tool. As a result, it was seen that the inductor current and the working gap greatly affected the surface roughness improvement. And to predict the surface roughness of the inclined workpiece, S/N ratio and first-order response surface model was developed.

• 대한기계학회논문집A
• /
• 제36권3호
• /
• pp.259-264
• /
• 2012

비자성체의 자유곡면 자기연마 공정에서 자기력 세기의 향상은 매우 중요하다. 비자성체 자유곡면의 표면에 발생하는 자기력의 세기에 따라 자기연마 입자가 가지는 수직 절삭력이 변화하기 때문이다. 이러한 자기력 향상을 위하여 전자석 배열 테이블이 적용된 제 2세대 자기연마공정이 비자성체의 자유곡면 자기연마에 적용된다. 본 연구에서는 이러한 제 2세대 자기연마공정에서 전자석 배열 테이블에 발생하는 자기력 세기 향상을 위한 극성배열 방법을 제시하고 이를 알루미늄합금의 곡률 자기연마에 적용하였다. 그 결과 볼록 및 오목 형상에서 각각 S-N-S와 S-N-N-N-S 극성 배열에서 가장 높은 표면거칠기의 향상을 확인하였다. 또한 상승 가공경로에서 상대적으로 높은 표면거칠기 향상을 나타내었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.95-96
• /
• 2006

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.8-13
• /
• 2019

As increasing demand for precise machining in advanced disciplines, especially in semi-conductor, aeronautical and automotive industries, the magnetic abrasive deburring(MAD) which is able to eliminate micro-sized burr on complex surface in less time has drawn the attention in the last decades. However, the performance of MAD is subject to shape and size of a tool. Therefore, this study aim to identify deburring behavior of MAD in U-type flow channel by measuring the length rate of burr removal in radial distance of the cylindrical tool under four process factors. In order to evaluate the deburring effect of MAD on the surface, finishing regions are divided based on center of the circular cutting tool. As a results, it was defined that the amount of burr removal in a downward direction moving toward flow channel from the top surface was higher than upward direction. This is because the magnetic abrasives were detached from magnetic lines of force due to geometrical shape.

• 대한기계학회논문집A
• /
• 제37권3호
• /
• pp.319-324
• /
• 2013

본 연구에서는 CNT-Co 복합체를 이용한 전해-자기(EP-MAP) 복합가공 공정을 개발하였다. CNT-Co 복합체는 높은 강도와 뛰어난 전기적 성질을 가지는 소재이기 때문에 전해-자기 복합가공의 연마재 및 전극으로 적합하다. 전해-자기 복합가공의 시너지 효과를 평가하기 위해서 각 실험조건하에서 특성평가 실험이 수행되었으며, 각 실험인자는 자기력, 전해액, 공구의 회전속도, 전해전압, 간극 등이 있다. 그 결과 CNT-Co 복합체와 화학적 반응이 없는 $NaNO_3$ 가 본 공정의 가장 적절한 전해액으로 선정되었다. 그리고 높은 자기력은 가공중의 CNT-Co 복합체내에 전해액 유동을 방해하는 인자이다. 이로 인해 공작물의 표면상의 가공부위에 열에너지가 상승하게 되고 공작물 표면손상과 피팅현상이 발생하여 가공효율성이 떨어지게 된다.

• 대한기계학회논문집A
• /
• 제41권4호
• /
• pp.251-255
• /
• 2017

미세 패턴의 기계적 가공에서는 버의 발생이 불가피하고, 패턴과 버의 크기가 매우 작아 이를 구분하기 어렵다. 본 연구에서는 turning machine을 이용하여, 원통형 공작물의 옆면에 패턴의 피치와 높이가 각각 60, $1{\mu}m$인 마이크로 패턴을 제작하고, 패턴의 형상을 이용하여 버의 형상과 생성 메커니즘을 정의하였다. 또한, 자기연마 디버링을 이용하여 마이크로 패턴의 정밀도를 높이고자 하였다. 그 결과, 미세패턴의 제작 시, 공구의 이송방향에 따라 버의 생성방향이 결정됨을 확인할 수 있었다. 또한, 자기연마디버링 공정에서 자속밀도와 공구의 회전속도가 각각 40mT, 1600rpm일 때, 패턴의 높이는 $1.018{\mu}m$로 측정되었으며, 자기연마 디버링에 가장 적합한 조건임을 알 수 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.198-203
• /
• 1998

To acquire the high precision of profile for standard electrode of loss angle, it is needed ultraprecision machining technology like MEAP(Magnetic Electronic Abrasive Polishing) and the very high profile measurement technology which can measure a micro unit about the workpiece. So, in this paper, it was developed the measurement system of precision of profile using non-contactable sensor that was approximate sensor of capacitance type, because that is better than others in the electrical characteristics. And standard electrode of loss angle was machined by the MEAP machining technology. In this study, it was development of precision measurement system. This system could be used measure the workpiece of roundness and straightness much more precise and faster than general mechanical measurement system done before. And it could be helped to minimize machining time and planning by very fast and precise measurement about the workpiece.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.114-120
• /
• 2013

An EP(Electrolytic Polishing)-MAP(Magnetic Abrasive Polishing) hybrid process was applied to remove burr on the micro pattern. Micro pattern fabrication processes are combined with micro milling and EP-MAP hybrid process for deburring. Depending on the micro milling conditions which are applied, micro burrs are formed around the side and top of the pattern. The EP-MAP deburring is used to remove these burrs effectively. To optimize removal rate and form error in the EP-MAP hybrid process, a design of experiment was performed. The effect of deburring process and form error of micro pattern are evaluated via SEM images and the results of AFM.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.20-24
• /
• 2017

Recent industrial developments are constantly advancing, and rapid technological development is demanding high technology level in related fields. The need for polishing is increasing even more to improve quality. In order to improve the surface quality, the final finishing process or polishing process is a very important part. Research on super precise polishing method using MR fluid is actively being carried out in domestic and foreign countries. Fine magnetic abrasive grains are aligned in the direction of a magnetic force line formed by a magnetic field and serve as a brush to polish a metal surface. This method has the advantage that the shape of the tool is not fixed and is not affected by the shape of the workpiece or the machining area. We will design the electromagnets for the MR polish polishing system and apply the magnetic field analysis using the magnetic field analysis program (ANSYS). The data obtained through this process suggests an efficient method to increase the magnetic flux density important for polishing. We will investigate the influence of the Al6061-T6 specimen on the surface of the MR polishing machine based on the optimized design.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.12-18
• /
• 2019

Fluid jet polishing is a method of jetting a fluid to polish a concave or free-form surface. However, the fluid jet method is difficult to form a stable polishing spot because of the lack of concentration. In order to solve this problem, MR fluid jet polishing system using an abrasive mixed with an MR fluid whose viscosity changes according to the intensity of a magnetic field is under study. MR fluid jet polishing is not easy to formulate for precise optimal conditions and material removal due to numerous fluid compositions and process conditions. Therefore, in this paper, quantitative data on the factors that have significant influence on the machining conditions are presented using various simulations and the correlation studies are conducted. In order to verify applicability of the fabricated MR fluid jet polishing system by nozzle diameter, the flow pattern and velocity distribution of MR fluid and polishing slurry of MR fluid jet polishing were analyzed by flow analysis and shear stress due to magnetic field changes was analyzed. The MR fluid of the MR fluid jet polishing and the flow pattern and velocity distribution of the polishing slurry were analyzed according to the nozzle diameter and the effects of nozzle diameter on the polishing effect were discussed. The analysis showed that the maximum shear stress was 0.45 mm at the diameter of 0.5 mm, 0.73 mm at 1.0 mm, and 1.24 mm at 1.5 mm. The cross-sectional shape is symmetrical and smooth W-shape is generated, which is consistent with typical fluid spray polishing result. Therefore, it was confirmed that the high-quality surface polishing process can be stably performed using the developed system.