• 제목/요약/키워드: Magnet Wheel

검색결과 83건 처리시간 0.045초

Fault Tolerant Actuator for Steer-By-Wire Application

  • Mutschler P.;Krautstrunk A.
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.741-745
    • /
    • 2001
  • Reliability and safety of steer-by-wire concepts can be achieved by redundant designs. This paper discusses the design of a fault tolerant concept for a force feedback actuator with a standard three-phase PMSM. In contrast to usual drives, the phases of the machine are separated electrically. This design allows driving the machine with two instead of three phases in case of a fault. A superimposed torque controller adjusts the influence of fault currents and torque harmonics in two-phase operation and guarantees smooth torque at the steering wheel

  • PDF

고정밀 서피스 서보 방법론 (High-Precision Surface Servo Methodology)

  • 정광석;박준규;심기본
    • 융복합기술연구소 논문집
    • /
    • 제3권1호
    • /
    • pp.1-8
    • /
    • 2013
  • High-precision surface actuator, in which in-plane motion is realized by not two-dimensional actuator superposing linear actuators but integrated planar actuator, has been developed to cope with the severe target performance like precise motion with large envelope. It is very difficult to accomplish the performance with the traditional actuating principle. So, various methods have been tried to break through the problem. This paper discusses some meaningful trials performed in the Nano Measurement and Precision Motion Control Lab. of Korea National University of Transportation.

  • PDF

코깅토크 및 토크리플 저감을 위한 EPS용 영구자석 전동기 설계 특성 (Design Characteristics of PM Motor for Electric Power Steering Aimed at Cogging Torque and Torque Ripples Reduction)

  • 이상곤;김창기;김상훈;정유석;정상용
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.613_614
    • /
    • 2009
  • Electric power steering(EPS) has many attentions such as fuel consumption improvement, thus it has been widely adopted for automotive application in recent years. In the EPS system, torque vibrations are directly transferred through the steering wheel to the hands of the driver. Hence, the design of PM motors for the EPS should be performed in order to reduce torque ripples including cogging torque. In this paper, Surface mounted Permanent Magnet Synchronous Motor(SPMSM) is designed to reduce torque ripples and cogging torque at a same time for the EPS propulsion and the design results are verified with the experimental ones.

  • PDF

레일방식 초고속열차 추진용 축소 초전도 LSM 설계 연구 (Design of a Small-scaled Superconducting LSM for the Very High Speed Railway Vehicle)

  • 박찬배;김재희;이병송
    • 전기학회논문지
    • /
    • 제63권11호
    • /
    • pp.1602-1607
    • /
    • 2014
  • This paper deals with the design and property analysis of 7kW-class small-scaled superconducting Linear Synchronous Motor (LSM) and testing equipment for a number of performance pre-tests prior to the development of coreless-type superconducting LSM suitable for 600km/h very high speed train. First, the basic design and property analysis are conducted before developing a small-scaled superconducting LSM model with 2-pole superconducting electromagnets, and additionally the cost-down design of the superconducting electromagnets is conducted to use less high-Tc superconducting wire. Finally, the superconducting magnet coil span is selected at 120mm, and input ground armature current of 670Aturns is required to produce 44.7N of thrust based on research findings.

영구 자석 바퀴를 이용한 벽면 이동 로봇의 설계시의 설계지침 (Guideline for the Design of Wall-Climbing Mobile Robot Using Permanent Magnetic Wheels)

  • 이화조;김은찬;한승철
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2002년도 추계학술대회 논문집
    • /
    • pp.548-553
    • /
    • 2002
  • Most tasks of the large vertical or ceiling structures have been carried out by human power. Those tasks require us much operation costs and times, safety devices, etc. So the need of automation for those tasks have been rising. That automation needs a wall-climbing mobile vehicle. Most former researches are things about attachment devices and moving mechanisms. A wall-climbing mobile vehicle must be designed by a method different from the case of the vehicle of the horizontal environment. That is because gravity acts as a negative role on the stability of a wall-climbing vehicle. In this thesis, the particular shape characteristics of a wall-climbing mobile vehicle are derived by the wall-environment modeling. In addition, some design constraints of the permanent magnetic wheel as an attachment device was studied. According to those requirements and constraints, one specific wall-climbing mobile vehicle was designed and some experiments were made on the attachment ability of that vehicle.

  • PDF

AFPM 전동기를 이용한 수/전동 휠체어 개발 (Development of a hybrid wheelchairs by using AFPM motor)

  • 김형길;공정식;서영택;오철수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 B
    • /
    • pp.908-910
    • /
    • 2004
  • Disabled people have benefited greatly from the developments in technology over the last twenty years. Systems have been developed and refined to help them overcome, or cope with, difficulties they experience as a result of their disabilities. As technology has become cheaper, more powerful and easier to use, disabled people have taken to using them to an ever increasing degree. In this paper, we propose novel hybrid mobility devices which use a combination of human power and electric power. This paper deals with the design of a direct-drive wheel Axial-flux permanent magnet motor. This type motor prove to be the best candidate for application in electric vehicles, as in comparison with conventional motors they allow design with higher compactness, lightness. A prototype vehicle for an application as a hybrid wheelchair is designed, built, and tested.

  • PDF

회전식 자기냉동장치에 대한 실험적 연구 (Experimental Study on a Rotary Magnetic Refrigeration Device)

  • 이종석;홍정호
    • 설비공학논문집
    • /
    • 제16권12호
    • /
    • pp.1101-1106
    • /
    • 2004
  • Magnetic refrigeration is based on the magnetocaloric effect (MCE)-the ability of some materials to heat up when magnetized and cool down when demagnetized. A rotary magnetic refrigeration device using gadolinium (Gd) ribbon and permanent magnets was constructed for experimental study. Gd ribbon attached around a rotating wheel is cyclically magnetized and demagnetized by permanent magnets and exchanges heat with liquid in the surrounding container. Temperature of the liquid in each divided section of the container was measured and the experimental results obtained in this study were discussed.

전자계 설계 기반 전류맵 모델 개발에 관한 연구 (A Study on Development of Current Map Model Based on Electromagnetic Field Design)

  • 박귀열;황요한;최종실;이주
    • 전력전자학회논문지
    • /
    • 제26권6호
    • /
    • pp.454-461
    • /
    • 2021
  • To control the torque of the IPMSM, a lookup table is generally used in control system because of its nonlinear characteristics. However, the method of generating the lookup table data has the disadvantage of having difficulty accurately analyzing the changing parameters, generating the current or magnetic flux map is complicated and long test time taken due to motor temperature differences at each test points. In this paper, on the basis of the electromagnetic field design of IPMSM, we devised an electromagnetic field-based magnetic flux map model that can compensate for the pre-generated magnetic flux map through a quick and simple test.

Die-upset법에 의한 Pr-Fe-B자석의 자기적 성질에 관한 연구 (Studies on Magnetic Properties of Die-upset Pr-Fe-B Magnets )

  • 이경섭;서수정;박현순;이병규;정지연
    • 한국자기학회지
    • /
    • 제3권3호
    • /
    • pp.201-207
    • /
    • 1993
  • $Pr_{15}Fe_{77}B_{8}$ 조성의 합금을 Ar분위기에서 유도용해로를 이용하여 주조하 였다. 이 합금을 석영관에 넣어 고주파 유도로를 이용하여 용해한 후 0.6 nm의 분출구를 통해 회전하는 Cu wheel위에 분사하여 비본형태로 제조하였다. 이 리본을 열간변형하여 결정방향성을 주었는데 이를 위 해 먼저 $680^{\circ}C$에서 $21.8\;kg/mm^{2}$의 압력으로 hot-press하여 92%의 densification을 갖는 시편을 얻을 수 있었다. 이 시편을 다양한 조건하에서 die-upset을 행하였다. 변형율이 높을 수록 $_{i}H_{c}$는 저하되었으나, $B_{r}$은 현저하게 증가되었으며, XRD 분석 결과(006)면에서의 회절강도가 증가되었다. 따라서 압축방향으로 자화용이축이 형성되었음을 알 수 있었다. Die-upset시의 변형속도가 빠를 수록 $_{i}H_{c}$는 증가되었으나, $B_{r}$은 감소되었다. 가공온도에 따른 $B_{r}$의 변화는 $750^{\circ}C$ 까지 상승한 후 감소되었다. 이 조성의 $4{\pi}M_{s}$는 11.8 kG였고 $750^{\circ}C$에서 0.05 mm/sec의 가공속도로 변형률 0.8로 die-upset한 경우에는 $B_{r}$이 11.0 kG로 우수한 자기이방성을 가지고 있으나, die-upset후에 $_{i}H_{c}$가 낮은 문제점이 있다.

  • PDF

소형 추적 레이다용 서보 개발 (Development of Servo for Small Tracking Radars)

  • 이종국;이석인;김준수;송태성;엄영철;안세환;신유진;주지한;권준범;김상욱
    • 한국인터넷방송통신학회논문지
    • /
    • 제22권6호
    • /
    • pp.21-30
    • /
    • 2022
  • 본 논문에서는 소형 추적 레이더에 적용 가능한 서보의 설계, 제작, 시험에 대해 기술하였다. 우선 1장에서는 본 연구의 필요성에 대해 기술하였다. 2장에서는 향후 소형 유도무기용 추적 레이다에 적용 가능한 서보 개발에 대해 기술하였다. 3장에서는 브러쉬 직류전동기, 브러쉬리스 직류 전동기, 영구 자석 동기 전동기의 전류 제어를 위한 설계 및 시험 결과를 대해 기술하였다. 그리고 4장에서는 시험 휠의 속도 제어를 위한 설계 및 시험 결과를 기술하였다. 그리고 5장에서는 앞선 시험들의 결과를 정리하였다. 본 논문에서는 보안상의 이유로 일부 그림을 의도적으로 흐림(blur) 처리 하였으며, 개발된 짐벌과의 시험이 아니라 별도의 시험 휠의 제어 결과를 기술하였다.