• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.3114-3120
• /
• 2023

A high-accuracy magnetic field measurement device based on a cyclotron is being developed for accelerator mass spectrometry (AMS). In this study, a magnetic field measurement device consisting of a Hall probe sensor, piezo-motor, and step motor was developed to measure the magnetic field of the AMS cyclotron magnet. The Hall probe sensor was calibrated to achieve positional accuracy by using polar coordinates. The measurement results between the ratchet gear and piezo-motor, which are the instruments used for driving the measurement device, were analyzed. The measurement result of the device with a piezo-motor exhibits a difference of 5 Gauss (0.04%) as compared with the simulation result.

• 제어로봇시스템학회논문지
• /
• 제18권7호
• /
• pp.627-631
• /
• 2012

Observable mathematical model of DDM (Direct Dirve Motor) was suggested. The motor that operates the object system directly is called DDM. DDM has many strong points, however, it has a significant disadvantage, that it is more sensitive to the external force than the motor with reduction gear. In other word, if the force is applied, air gap of the motor can be perturbed. This causes not only difficulty in motor control but also even more serious problem, such as the breakdown of motor. However, if the air gap variation can be estimated, it can help prevent these problems. DDM should be modeled to estimate the air gap variation. The type of researched DDM is PMSM (Permanent Magnet Synchronous Motor) and precedent model of PMSM includes only characteristics of electro-magnetic system and rotational motion. However, suggested model should also include characteristics of translational motion of rotor to estimate the air gap variation. Also, this model should satisfy observability condition, because state observer is designed based on this model.

• 제어로봇시스템학회논문지
• /
• 제10권3호
• /
• pp.286-293
• /
• 2004

This paper presents the result of a study on the starter control for a turbo generator. Because a starter in gear box type turbo-generator system is composed of gearbox and brush DC motor, it should be replaced with High Speed Generator(HSG)) in HSG type Turbo-generator. There-ore, it is necessary to design a new starting algorithm and starter. In gearbox type system, brush DC motor is rotated to the designed speed using low voltage-high current battery power. After brush DC motor speed is increased to several times by gearbox, gas turbine engine can be rotated to designed starting speed. If we implement a starter with High Speed Generator(HSG), it is necessary to drive high-speed generator to high-speed motor. High-speed generator with permanent magnet on rotor has a low leakage inductance fur driving high-speed rotation, and it is necessary high DC link voltage for inverter when High-speed generator is driven to high speed. This paper presents result of development of the boost converter for converting high voltage DC from low battery voltage and design of the inverter for controlling a high frequency current to be injected to motor winding. Also, we show performance of the designed starter by driving the turbo generator.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.273-279
• /
• 2016

In this paper, a high-performance control of the induction motor for electric car was implemented to escape dependence of the rare earth magnet. Proposed high-efficiency control algorithm is a Direct Rotor Field-Oriented Control method that is insensitive to the fluctuation of motor parameters. In the DRFOC method, we need to compensate fluctuation of stator transient inductance and magnetizing inductance caused by the magnetic saturation of induction motor in high-speed area. This paper proposes Back-EMF Observer based on stator current estimator of Luenberger style. Motor control system applied the Voltage Feedback Flux Weakening Control method for high-speed operation. The proposed algorithm was verified through tests by the power train of Extended Range Electric Vehicle consists of induction motor and differential gear.

• 한국철도학회논문집
• /
• 제11권4호
• /
• pp.398-403
• /
• 2008

전동차용 견인전동기 시스템은 저항 및 쵸퍼 제어에 의한 직류 전동기 방식에서 인버터 제어에 의한 유도전동기 방식으로 발전하였다. 오늘날 유도전동기 기술은 어느 정도 성숙기에 접어들었지만 최근에는 소음제거, 효율 극대화 및 유지보수 비용 절감 등의 이점이 있는 감속기를 제거한 직접 구동용 영구자석 전동기가 새로이 각광받고 있다. 특히 기계적으로 견고한 매입형 영구자석 동기전동기는 출력/토크 밀도가 높고 약계자 제어성이 우수하며 고효율 운전이 가능하다. 본 논문은 자기적 포화특성이 심한 영구자석 전동기를 대상으로 고급화된 비선형 수치해석 기법을 적용하여 설계된 전동기의 특성해석을 나타낸다.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.49-55
• /
• 2015

In this study, among in various scenarios of the duration degradation of the fuel cell, countermeasures for the cathode carbon carrier oxidation and the deactivation of catalyst by hydrogen / air interface formation have been studied. so the system was applied to the air cutoff valve. In terms of the component, the cold start performance, electrical stability, the airtight performance were mainly designed and their performance was confirmed. And in terms of the system, the air electrode flow is blocked off, so the oxygen concentration drops when system is powered off, As a result, By reducing unit cell voltage which affect the durability of the fuel cell reached up to 0.8V, the improved durability of the fuel cell was confirmed.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.106-114
• /
• 2014

The interior permanent-magnet synchronous motor (IPMSM) is often used for the traction motor of hybrid electric vehicles (HEVs) and electric vehicles (EVs) due to its high power density and wide speed range. This paper introduces the 120kW class IPMSM for traction motors in military trucks. This system, as a SHEV (series hybrid electric vehicle), requires a traction motor that can generate high torque. This study introduces a way to reduce costs by proposing a design approach that creates reluctance torque that can be maximized by varying the dq-axis inductance. If a model designed by a design approach meets the desired torque, the magnetic torque can be reduced by an amount equal to the increase in reluctance torque and consequently the amount of permanent magnets can be reduced. A reduction gear and high speed operation of motors are necessary for the miniaturization of the motor. Thus, a fairly large centrifugal force is generated due to the high speed rotation. This force causes mechanical interference between the rotor and the stator, and a design approach for adding an iron bridge is explained to solve the interference. In this study, the initial model and the improved model that reduces cost and improves mechanical durability are compared by FEA, and the models are produced. Finally, the FEM results were verified experimentally.

• 한국자기학회지
• /
• 제25권3호
• /
• pp.92-100
• /
• 2015

전기자동차는 구동방식에 따라 인휠(in-wheel) 방식과 인라인(in-line) 방식으로 구분될 수 있다. 인휠 방식 전기자동차는 기존의 자동차에서 사용하였던 변속기, 축, 차동기어 등을 제거 할 수 있기 때문에 구조가 간단해지고 차체를 경량화하여 효율을 증대시킬 수 있는 장점이 있다. 본 논문에서는 파라미터 맵(parameter map)을 이용한 차량용 인휠 전동기의 설계 방법을 제시하고, 연속정격 5 kW급 전동기를 설계하여 제작 및 성능 검증을 한다. 우선 차량의 요구 성능을 만족하는 인휠 전동기의 용량을 결정하기 위해 차량의 총무게, 기어 효율, 바퀴의 등가반경, 등판각도 등을 고려한 차량동특성해석을 수행한다. 이것을 통해 전동기 용량을 결정하고, 전동기 형상 및 치수를 결정하기 위한 초기설계를 진행한다. 그리고 요구 성능을 만족하는 전동기 파라미터를 결정하기 위해 파라미터 맵을 이용한 파라미터 설계를 수행한다. 파라미터 맵을 통해 전동기 파라미터를 결정한 후 마지막으로 무부하역기전력의 왜형율(Total Harmonic Distortion, 이하 THD), 코깅토크(cogging torque), 토크리플(torque ripple) 등의 개선을 위해 최적설계를 수행한다. 최종 설계 모델에 대해 제작을 하였으며, 성능 검증 및 제시한 설계방법의 신뢰도 검증을 위해 부하시험을 진행한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.59-63
• /
• 2005

The 800-kW PM (permanent magnet) synchronous generator is developed as a wind power generator. The matching converter is designed to control the torque and power depending on the wind speed regime. The generator starts to generate the power at the speed of 9 rpm and the rated output is generated at the speed of 25 rpm. The rated output power of an inverter is 750 kW when the PM synchronous generator is delivering 800 kW to the inverter. The inverter is specially designed to perform the maximum power point tracking (MPPT) at the low wind speed regime that is typical wind environment in Korea. The inverter test was done with a 2 MW M-G system at KERI (Korea Electric Research Institute). The M-G set has a 2 MW motor driver and a 38:1 gear to match the speed between the motor and the PM generator. The torque simulating the wind is applied to the PM generator by a DC motor. The test results show the inverter efficiency of $94.3\%$ at the rated power generating condition. The measured values show that the MPPT algorithm is working well. Overall reliability will be verified through the long-term site test.