• 대한기계학회논문집
• /
• 제18권6호
• /
• pp.1388-1398
• /
• 1994

The fracture toughness and micro-fracture mechanisms of the porous glass and stainless fiber reinforced glass composite were evaluated by using the acoustice mission(AE) technique, fracture toughness $test(K_{IC})$ and the macroscopic observation of the specimen surface which was being under the loading. At initial portion of the loading, the AE signals with low energy, of which origins were considered as the micro-cracks formated at the crack tip, were emitted. With increasing the applied load, AE signals having higher energies were generated due to the coalesence of micro-cracks and fast fracture. Based on the such relationship between AE emission and loading condition, fracture toughness $K_{IAE}$ could be defined successfully be using the $K_I$ value corresponding to an abrupt change of the accumulated AE signal energies emitted during the fracture toughness test. In spite of its brittleness of glass material, nonlinear deformation behavior before maximum load was observed due to the formation of micro-cracks. Further, the stainless fiber may have attributed to the improvement of fracture toughness and the resistance to crack propagation comparing to noncomposited materials Finally, models of the micro-fracture process combined with the AE sources for the porous glass material and its composite were proposed paying attention to the micro-crack nucleation and its coalescence at the crack tip. Fiber fracture and its Pullout, deformation of fiber itself were also delinated from the model.

• Journal of the Korean Wood Science and Technology
• /
• 제23권1호
• /
• pp.42-48
• /
• 1995

The purpose of this study is to evaluate the efficacy of metabolites produced form Streptomyces rimosus in controlling the growth of sapwood - inhabiting fungi. In order to carry out this task, the following specific fungi were tested : sapstain fungi - Ceratocystis pilifera, Ceratocystis piceae, and Aureobasidium pullulans ; mold fungi - Trichoderma hazianum, Trichoderma viride, Penicillium cirtrinum, and Aspergillus niger. Based on the tests, the following observations can be drawn. 1. The conidial germination of sapstain and mold fungi was completely inhibited leaving a clear zone around the paper disc treated with metabolites. The best inhibition was observed in A. pullulans plate and the least in T. viride. 2. Concentration of SB medium for the production of metabolites from St, rimosus affected antifungal activity of metabolites against sapwood - inhabiting fungi. Metabolites prepared from 1/3${\times}$SB medium showed the best activity and the least activity was observed in metabolites form 1/4${\times}$medium. 3. in vivo and in vitro test using wood blocks, treatment of pine sapwood blocks with metabolites also inhibited conidial germination and thus prevented discoloration. 4. Treatment with metabolites did not change the macroscopic structure of wood and did not cause the discoloration of the surface of wood by pigments produced form St. rimosus. In conclusion the results of this study indicate that antifungal metabloites of St, rimosus could be used for the biological control of sapstain and mold fungi.

• 대한기계학회논문집A
• /
• 제37권9호
• /
• pp.1189-1194
• /
• 2013

초고온가스로의 중간열교환기는 원자로에서 생산된 $950^{\circ}C$ 정도의 초고온 열을 수소생산 공장으로 전달하는 핵심 기기이다. 한국원자력연구원에서는 중간열교환기의 후보 형태로 고려되고 있는 인쇄기판형 열교환기의 실험실 수준 시제품을 제작하였다. 본 연구는 초고온헬륨루프 시험조건하에서 SUS316L 로 제작된 실험실 수준 인쇄기판형 열교환기 시제품의 고온구조건전성을 미리 평가하기 위한 작업의 일환으로 인쇄기판형 열교환기 실험실 수준 시제품에 대한 고온 구조해석 모델링, 거시적 열 해석 및 구조 해석을 수행하고 그 결과들을 정리한 것이다.

• Journal of Chest Surgery
• /
• 제43권6호
• /
• pp.596-601
• /
• 2010

배경: 심장막유착에 hyaluronic acid와 sodium carboxymethyl cellulose 혼합용액 (HA-CMC solution, $Guardix-sol^{(R)}$)의 유착방지 효과를 평가하기 위해 본 연구를 시행하였다. 대상 및 방법: 30마리의 흰쥐를 각각 15마리씩 2그룹으로 나누었으며 기계적 마찰을 통해 심장막 중피 손상을 유발시켰다. 대조군은 혈액과 생리식염수를, 실험군은 혈액과 HA-CMC 혼합용액을 심장막공간에 주입하였다. 수술후 2주, 4주, 6주에 5마리씩 심장막유착의 정도를 평가하였다. 유착의 정도를 육안으로 평가하였으며, 유착조직의 두께는 Masson trichrome염색과 영상처리프로그램을 통해 현미경적 분석을 시행하였다. 결과: 육안적검사상 실험군에서 유착점수가 대조군에 비해 유의하게 낮았다($2.9{\pm}0.6$ : $3.9{\pm}0.4$, p < 0.000). 실험군에서 유착조직두께는 대조군에 비해 낮았으나 통계적으로 유의하지는 않았다($91.73{\pm}49.91$ : $117.67{\pm}46.4$, p=0.106). 결론: 실험동물 모델에서 HA-CMC용액 ($Guardix-sol^{(R)}$)의 유착형성을 감소시키는 것을 관찰하였다.

• 대한약침학회지
• /
• 제18권4호
• /
• pp.45-50
• /
• 2015

Objectives: In this study, we investigated the 4-week repeated-dose oral toxicity of gami-jakyak gamcho buja decoction (Mecasin) to develop safe treatments. Methods: In order to investigate the 4-week oral toxicity of Mecasin, we administered Mecasin orally to rats. Sprague-Dawley (SD) rats were divided into four groups of five male and five female animals per group: group 1 being the control group and groups 2, 3, and 4 being the experimental groups. Doses of Mecasin of 500, 1,000, and 2,000 mg/kg of body weight were administered to the experimental groups, and a dose of normal saline solution of 10 mL/kg was administered to the control group. We examined the survival rate, weight, clinical signs, and gross findings for four weeks. This study was conducted under the approval of the Institutional Animal Ethics Committee. Results: No deaths occurred in any of the four groups. No significant changes in weights or food consumption between the control group and the experimental groups were observed. Serum biochemistry revealed that some groups showed significant decrease in inorganic phosphorus (IP) (P < 0.05). During necropsy on the rats, one abnormal macroscopic feature, a slight loss of fur, was observed in the mid dosage (1,000 mg/kg) male group. No abnormalities were observed in any other rats. In histopathological findings, the tubular basophilia and cast of the kidney and extramedullary hematopoiesis of the spleen were found. However, those changes were minimal and had occurred naturally or sporadically. No other organ abnormalities were observed. Conclusion: During this 4-week, repeated, oral toxicity test of Mecasin in SD rats, no toxicity changes due to Mecasin were observed in any of the male or the female rats in the high dosage group. Thus, we suggest that the doses in a 13-week, repeated test should be 0, 500, 1,000, and 2,000 mg/kg respectively.

• 한국추진공학회지
• /
• 제16권5호
• /
• pp.1-9
• /
• 2012

동축형 다공성재 분사기에서는 중심 액체제트 주위를 둘러싼 원통형 다공성재의 내부 표면에서 반경방향으로 분사된 기체가 중심액체제트와 상호작용을 하게 된다. 표면분사된 기체제트는 반경방향에서 축방향으로 발달하며, 그 과정에서 액체분무의 중심부까지 운동량을 효과적으로 전달하여 미립화 및 혼합 성능을 향상시킨다. 본 연구에서는 기체분사 면적 및 기체분사 질량유량을 변화시켜 각각 운동량 비 및 웨버수의 크기를 조절하였으며, 이에 따른 물-공기 모사추진제 수류시험에서의 분무특성에 대한 고찰을 수행하고 동일 스케일의 전단 동축형 분사기와의 비교 분석이 이루어졌으며, 동축형 다공성재 분사기에서 반경방향으로의 기체분사가 2상유체의 미립화/혼합에 긍정적인 영향을 주는 것으로 판단된다.

• 대한치과보철학회지
• /
• 제31권4호
• /
• pp.482-505
• /
• 1993

The purpose of this study was to evaluate the fracture characteristics and the effect of resin bonding of laminate porcelain. In order to characterize the indentation-induced crack, Young's moduli and characteristic indentation dimensions were measured. The fatigue life under three point flexure test was measured using the electro-dynamic type fatigue machine, and the crack propagation with thermocycling was investigated on the condition of 15 second dwell time each in $5^{\circ}C\;and\;55^{\circ}C$ bath. The Vickers indentation pattern and the fracture surface were examined by an optical microscope and a scanning electron microscope (SEM). The results obtained were summarized as follows ; 1. Young's moduli(E) of the laminate porcelain and the resin cement used in this experiment were $62.56{\pm}3.79GPa$ and $15.01{\pm}0.12GPa$, respectively. 2. The initial crack size of the laminate porcelain was $69.19{\pm}5.94{\mu}m$ when an indentation load of 9.8N was applied, and the fracture toughness was $1.065{\pm}0.156MPa\;m^{1/2}$. 3. The fatigue life of laminate porcelain showed the constant fracture range at the stress level 27.46-35.30MPa. 4. When a cyclic flexure load was applied, the fatigue life of resin-bonded laminate porcelain was more decreased than that of laminate porcelain. 5. When a thermocycling was conducted, the crack growth rate of resin-bonded laminate porcelain was more increased than that of laminate porcelain. 6. Fracture surface showed the radial crack, the lateral crack, and the macroscopic crack branching region beneath the plastic deformation region when an indentation load of 9.8N was applied.

• Biomolecules & Therapeutics
• /
• 제6권1호
• /
• pp.95-110
• /
• 1998

A 13-week dermal toxicity test was conducted to assess the toxicity of DA-5018, a capsaicin derivative. Three groups of Sprague-Dawley rats (10-15 males and 10-15 females) were treated with DA-5018 cream daily by dermal application at concentrations of 0.1%, 0.3% or 0.9% as 500 mg/kg for 13 weeks. One further group of rats (15 males and 15 females) received cream base at 500 mg/kg/day and acted as controls. One male receiving 0.3% DA-5018 cream died during the treatment period. But the animal did not show any signs of treatment-related toxicity until death. There were no local skin reaction of application site and systemic reaction to the treatment of DA-5018 creams in all experimental groups throughout treatment and recovery period. Weight gain and food consumption in animals that received DA-5018 creams appeared to be comparable to that of the controls. Laboratory analyses (hematology, urinalysis and opthalmoscopic examination) did not revealed pathological values. In biochemical investigations, an increase of glucose level associated with increased food consumption and some other significant changes were noted in the animals of both sexes received DA-5018 creams. But these changes were not considered to be of toxicological importance. Postmortem examination did not show macroscopic or histological alterations attributable to the DA-5018 treatments. Based on these results, NOAEL(no-observable-adverse-effect level) of DA-5018 cream if estimated to be over 500 mg/tg/day as 0.9% cream.

• 한국산학기술학회논문지
• /
• 제17권3호
• /
• pp.270-275
• /
• 2016

본 연구에서는 디젤 연료 온도에 따른 실제 분사되는 연료량, 분사율 그리고 거시적 분무 발달 과정에 대한 특성을 파악하고자 하였다. 시험 결과 동일한 분사 시작 신호 및 분사 기간 신호를 입력하였음에도 불구하고, 연료 온도가 낮아짐에 따라 실제 연료 분사량이 감소하는 경향을 보였다. 분사율 측정 결과를 통해 연료 온도가 낮은 조건에서 실제 분사 시작 시점이 지연되며, 실제 분사가 유지되는 기간이 짧아지는 것을 확인하였으며, 이를 통해 실제 분사되는 연료량 저감에 대한 근거를 찾을 수 있었다. 거시적 분무 이미지 촬영 결과를 연료 온도 별 분무 도달 거리로 표현하여 비교 하였으며, 낮은 연료 온도 조건에서 분무 미립화 성능 악화로 인해 분무 도달 거리가 길어지는 것을 확인하였다. 저온 조건에서의 연소 개선을 위해 향후 시도할 선행 평가로서 피스톤 타켓팅 평가를 수행하였으며, 이른 시기에 분사되는 파일럿 연료가 크레비스 영역으로 유입되는 것을 확인하였으며, 이를 통해 파일럿 분사 방식 적용 시 연료량 분배 및 분사 시기 선정이 매우 중요한 인자가 됨을 파악하였다.

• 보존과학회지
• /
• 제32권2호
• /
• pp.155-165
• /
• 2016

수침고목재인 목재유물의 보존처리에 가장 많이 사용되는 PEG 함침 후 진공동결건조 방법의 단점인 표면 결함에 대한 안정화처리를 위해 HPC를 도포하였다. HPC의 효과를 확인하기 위해서 외관 및 실체현미경 관찰, 색차, 중량변화율, 치수변화율을 측정하고, 통계분석을 실시하였다. 목재시료의 표면에 HPC가 얇은 층을 형성하였고, 가도관의 관공과 균열의 틈 사이를 메우고 있었다. HPC 1,000,000을 처리한 시료의 부후되지 않은 표면에서 나타난 백화현상을 제외하고 다른 변화는 나타나지 않았다. 열화시킨 시료는 수분 흡착에 의한 색변화가 나타났다. 시료 표면의 얇은 HPC 층은 열화 후에도 유지되고 있었으며, 수분 흡착에 의한 중량변화와 치수변화는 HPC에 의해 억제되는 것으로 나타났다.