• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.294-297
• /
• 2019

New insights about macro-step formation has been investigated. The phenomena of surface instability caused by the interaction between step flow and fluid flow was describe in mechanical way. The rotation of the seed crystal in a clockwise direction was applied with a speed varied from 30 to 200 rpm during the TSSG process on the Si- and C-faces 4H-SiC. The macro-steps were formed along the two specific directions at different locations on the crystal for each, i.e., [10-10] or [01-10] directions or both. From the results, it is suggested that the macro-steps were generated from the micro-steps by interaction between step flow and fluid flow during the rotation of seed crystal. Furthermore, The fluid flow could be effective to control the micro- and/or macro-step behavior during solution growth.

• Lingua Humanitatis
• /
• v.5
• /
• pp.127-163
• /
• 2003

This thesis analyzes the Chapter "Hoyeonjigi(浩然之氣)" of Mencius(孟子), using text linguistics theory and reading theory of Korean. In this process the model of macro-structure #1∼5 are presented, according to Vandijk′s rules of macro-structure; Auslassen, Selektierne, Generalisieren, Konstruieren odor Integrieren. As a result, this certifies; First, macro-structure could make arbitrarily a several steps of macro-structure by types of text or purpose of analysis. Second, macro-structure applies various cognitive mechanisms of outer world as well as inner world. Third, a text with profound symbolism could be figured as a two-or threefolded symbolic structure. At the same time, macro-structure enables the clearer analysis of the content of the Chapter to verify the following; first, Hoyeinjigi itself is the best measure of developing "Imperturbable Mind(不動心)" Second, benevolence-righteousness(仁義) and wisdom(智) would be reached by cultivating Hoyeonjigi. Third, Mencius′ own view of language is well expressed in "Jieon(知言)", which is not only a condition for Imperturbable Mind, but also the Oriental view of language focused especially on listening in terms of language usage, not language analysis. This Mencius′ view of language has a thread connection with that of Oriental′s.

• Journal of Communications and Networks
• /
• v.14 no.3
• /
• pp.252-256
• /
• 2012

We consider resource allocation in femto-cell networks to maximize the throughput while minimizing interference to macro-users nearby. This can be achieved by allocating spectrum resource in a cognitive radio way. The proposed resource allocation is performed in two steps; spectrum sensing and resource scheduling. The femto base station detects idle frequency assignments (FAs) free from the occupation by macro-users and then allocates sub-channels in an idle FA to femto-users, effectively managing the interference problem. Finally, the effectiveness of the proposed scheme is verified by computer simulations.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.3
• /
• pp.811-820
• /
• 2006

We introduce a program that enhances the interest and understanding of students in Statistics. This program explains various statistical concepts and procedures by showing detailed steps of calculations with graphs and simulations. This program utilizes a readily accessible Excel VBA.

• Journal of the Korean Data and Information Science Society
• /
• v.23 no.5
• /
• pp.905-912
• /
• 2012

We are dealing with the Bayes' rule education tool with Excel Macro and its usage example. When an event occurs, we are interested in whether it does under certain conditions or not. In this case, we use the Bayes' rule to calculate the probability. Bayes' rule is very useful in making decision based on newly obtained statistical information. We introduce an efficient self-teaching educational tool developed to help the learners understand the Bayes' rule through intermediate steps and descriptions. The concept and examples of intermediate steps such as conditional probability, multiplication rule, law of total probability, prior probability and posterior probability could be acquired through step-by-step learning. All the processes leading to result are given with diagrams and detailed descriptions. By just clicking the execution button, users could get the results in one screen.

• Coupled systems mechanics
• /
• v.11 no.1
• /
• pp.55-78
• /
• 2022

The main aim of this paper is the identification of the model parameters for the constitutive model of concrete and concrete-like materials capable of representing full set of 3D failure mechanisms under various stress states. Identification procedure is performed taking into account multi-scale character of concrete as a structural material. In that sense, macro-scale model is used as a model on which the identification procedure is based, while multi-scale model which assume strong coupling between coarse and fine scale is used for numerical simulation of experimental results. Since concrete possess a few clearly distinguished phases in process of deformation until failure, macro-scale model contains practically all important ingredients to include both bulk dissipation and surface dissipation. On the other side, multi-scale model consisted of an assembly micro-scale elements perfectly fitted into macro-scale elements domain describes localized failure through the implementation of embedded strong discontinuity. This corresponds to surface dissipation in macro-scale model which is described by practically the same approach. Identification procedure is divided into three completely separate stages to utilize the fact that all material parameters of macro-scale model have clear physical interpretation. In this way, computational cost is significantly reduced as solving three simpler identification steps in a batch form is much more efficient than the dealing with the full-scale problem. Since complexity of identification procedure primarily depends on the choice of either experimental or numerical setup, several numerical examples capable of representing both homogeneous and heterogeneous stress state are performed to illustrate performance of the proposed methodology.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.2
• /
• pp.185-193
• /
• 2005

This study develops and introduces the program for letting learners study statistics in a systematic and efficient way by using Excel tools such as VBA and Macro, when they study statistical inference at two populations. This study helps learners understand the steps on statistical inference at two populations by utilizing the systematic and visual techniques.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.502-507
• /
• 2019

Macro-porous carbon foams are fabricated using cured spherical phenolic resin particles as a matrix and furfuryl alcohol as a binder through a simple casting molding. Different sizes of the phenolic resin particles from 100-450 ㎛ are used to control the pore size and structure. Ethylene glycol is additionally added as a pore-forming agent and oxalic acid is used as an initiator for polymerization of furfuryl alcohol. The polymerization is performed in two steps; at 80℃ and 200℃ in an ambient atmosphere. The carbonization of the cured body is performed under Nitrogen gas flow (0.8 L/min) at 800℃ for 1 h. Shrinkage rate and residual carbon content are measured by size and weight change after carbonization. The pore structures are observed by both electron and optical microscope and compared with the porosity results achieved by the Archimedes method. The porosity is similar regardless of the size of the phenolic resin particles. On the other hand, the pore size increases in proportion to the phenol resin size, which indicates that the pore structure can be controlled by changing the raw material particle size.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4703-4723
• /
• 2018

In recent years, dense small cell network has been deployed to address the challenge that has resulted from the unprecendented growth of mobile data traffic and users. It has proven to be a cost efficeient solution to offload traffic from macro-cells. Software defined heterogeneous wireless network can decouple the control plane from the data plane. The control signal goes through the macro-cell while the data traffic can be offloaded by small cells. In this paper, we propose a framework for cell virtualization and user association in order to satisfy versatile requirements of multiple tenants. In the proposed framework, we propose an interference graph partioning based virtual-cell association and customized physical-cell association for multi-homed users in a software defined small cell network. The proposed user association scheme includes 3 steps: initialization, virtual-cell association and physical-cell association. Simulation results show that the proposed virtual-cell association outperforms the other schemes. For physical-cell association, the results on resource utilization and user fairness are examined for mobile users and infrastructure providers.

• Advances in biomechanics and applications
• /
• v.1 no.1
• /
• pp.23-40
• /
• 2014

This paper examines the blood chamber of a left ventricular assist device (LVAD) under static loading conditions and standard operating temperatures. The LVAD's walls are made of a temperature-sensitive polymer (ChronoFlex C 55D) and are covered with a titanium nitride (TiN) nano-coating (deposited by laser ablation) to improve their haemocompatibility. A loss of cohesion may be observed near the coating-substrate boundary. Therefore, a micro-scale stress-strain analysis of the multilayered blood chamber was conducted with FE (finite element) code. The multi-scale model included a macro-model of the LVAD's blood chamber and a micro-model of the TiN coating. The theories of non-linear elasticity and elasto-plasticity were applied. The formulated problems were solved with a finite element method. The micro-scale problem was solved for a representative volume element (RVE). This micro-model accounted for the residual stress, a material model of the TiN coating, the stress results under loading pressures, the thickness of the TiN coating and the wave parameters of the TiN surface. The numerical results (displacements and strains) were experimentally validated using digital image correlation (DIC) during static blood pressure deformations. The maximum strain and stress were determined at static pressure steps in a macro-scale FE simulation. The strain and stress were also computed at the same loading conditions in a micro-scale FE simulation.