• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.691-692
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.423-424
• /
• 2011

• 산업기술연구
• /
• 제21권B호
• /
• pp.67-74
• /
• 2001

According as the patterns of PCB (Printed Circuit Board) become denser and complicated, quality and accuracy of PCB influence the performance of final product. It's attempted to obtain trust of 100% about all of parts. Because human inspection in mass-production manufacturing facilities are both time-consuming and very expensive, the automation of visual inspection has been attempted for many years. Thus, automatic visual inspection of PCB is required. In this paper, we used an algorithm which compares the reference PCB patterns and the input PCB patterns are separated an object and a scene by filtering and edge detection. And than compare two image using pattern matching algorithm. We suggest an defect inspection algorithm in PCB pattern, to be satisfied low cost, high speed, high performance and flexibility on the basis of $640{\times}480$ binary pattern.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.123-124
• /
• 2008

The appearance inspection of various electronic products and parts has been executed by the eyesight of human. But inspection by eyesight can't bring about uniform inspection result. Because the appearance inspection result by eyesight of human is changed by condition of physical and spirit of the checker. So machine vision inspection system is currently used to many appearance inspection fields instead of the checker. Therefore we proposes a inspection system in this paper. it will be able to secure the objectivity of the prosecuting attorney using inspection system. Also this system has been developed only using PC, CCD Camera and Visual C++ for universal workplace.

• 스마트미디어저널
• /
• 제11권9호
• /
• pp.47-55
• /
• 2022

스마트팩토리 제조공정에서의 품질관리는 중요한 요소이다. 현재, 금형 공정으로 생산되는 생활가전 제조부품의 품질검사는 대부분 작업자의 육안으로 진행되고 있으며 이로 인한 검사의 오류율이 높은 실정이다. 이러한 품질공전 개선을 위하여 결함 자동검출 시스템을 설계하여 구현하였다. 제안 시스템은 특정 위치에서 고성능 스캔 카메라로 대상물을 촬영하여 영상을 획득하고, 비전검사 알고리즘에 따라 긁힘, 찍힘, 이물질에 의한 불량품을 판독한다. 본 연구에서는 긁힘에 대한 불량 인식율을 높이기 위하여 깊이 정보 기반 분기 판단 알고리즘(Depth-based branch decision algorithm, DBD)을 개발하여 정확도를 높였다.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.494-498
• /
• 1998

이 논문은 에나멜 전선의 제조공정의 자동화에 있어서 핵심역할을 하는 보빈의 자동인식을 위한 머신 비젼 시스템에 관한 것이다. 이 시스템의 역할은 컨베이어 라인의 팔레트 위에 놓인 보빈들의 영상을 CCD 카메라로 취득, 분석하여 보빈 형태, 색상, 제조공정번호 등의 다양한 정보를 추출하여, 전체 생산공정을 제어하는 주 컴퓨터로 보내는 일을 수행한다. 이 비젼 시스템은 개발된 후 에나멜 전선 생산공장에 설치되어 일정 시험기간을 거쳐 현재 성공적으로 운영되고 있다.

• Agricultural and Biosystems Engineering
• /
• 제4권1호
• /
• pp.16-21
• /
• 2003

In the agricultural field, a machine vision system has been widely used to automate most inspection processes especially in quality grading. Though machine vision system was very effective in quantifying geometrical quality factors, it had a deficiency in quantifying color information. This study was conducted to evaluate color of beef using machine vision system. Though measuring color of a beef using machine vision system had an advantage of covering whole lean tissue area at a time compared to a colorimeter, it revealed the problem of sensitivity depending on the system components such as types of camera, lighting conditions, and so on. The effect of color balancing control of a camera was investigated and multi-layer BP neural network based color calibration process was developed. Color calibration network model was trained using reference color patches and showed the high correlation with L*a*b* coordinates of a colorimeter. The proposed calibration process showed the successful adaptability to various measurement environments such as different types of cameras and light sources. Compared results with the proposed calibration process and MLR based calibration were also presented. Color calibration network was also successfully applied to measure the color of the beef. However, it was suggested that reflectance properties of reference materials for calibration and test materials should be considered to achieve more accurate color measurement.

• 디지털융복합연구
• /
• 제16권3호
• /
• pp.303-309
• /
• 2018

컴퓨터 비전 기술은 인공지능의 한 분야로 인간의 눈의 기능을 기계가 수행 할 수 있도록 카메라로부터 영상 이미지를 취득하고, 알고리즘을 통하여 분석하고 판별한 후 생산부품의 양품과 불량을 판별하는 부품 검사에 많이 적용되고 있다. 볼트 생산 시스템에서 생산되는 볼트 탭의 유무를 컴퓨터 비전 기술을 적용하여 자동으로 불량품을 선별하는 장치를 개발하였다. 형상검사 방법으로는 라인 스캔방식으로 검사영역의 시작점과 끝점의 위치를 파악하여 높이를 측정하는 방법을 사용하였으며, 볼트 탭의 유무를 판별하기 위한 방식으로는 원형 스캔방식으로 검사영역의 평균 밝기 값의 차이를 측정하여 유사도를 구하는 방식을 사용하였다. 두 종류의 볼트 탭의 검사 성능실험에서 총 검사에 소요되는 시간은 분당 300개 검사가 가능하며, 완벽한 검사 정확도를 나타내어 생산라인에서 검사의 정확성과 효율성을 입증하였다.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.110-116
• /
• 2007

This paper presents a new technique to implement the real-time recognition for shapes and model number of parts based on an active vision approach. The main focus of this paper is to apply a technique of 3D object recognition for non-contacting inspection of the shape and the external form state of precision parts based on the pattern recognition. In the field of computer vision, there have been many kinds of object recognition approaches. And most of these approaches focus on a method of recognition using a given input image (passive vision). It is, however, hard to recognize an object from model objects that have similar aspects each other. Recently, it has been perceived that an active vision is one of hopeful approaches to realize a robust object recognition system. The performance is illustrated by experiment for several parts and models.

• 한국정보처리학회논문지
• /
• 제7권6호
• /
• pp.1973-1979
• /
• 2000

Driving the need for machine vision system is growing consumer demand for quality and defect-free products. Especially it is the most important in tarpaulin's manufacturing process achieves automatically by machine vision instead of by man vision. In this paper pinholes detection is performed by using morphology algorithms. Top hat transform is one of morphology applications. This transform take high performance of defect detection in the case that unexpected changes occur in some non-uniform background. For pinholes defect, automatic visual inspection system has been developed, which was composed by a line-scan camera, illumination, a frame grabber, a motor driver and control units. This system has excellent capacity to defect pinholes to the 0.1 mm by 0.5 mm in size and to work in moving objects by maximum 20 m/min in speed.