• 대한치과보철학회지
• /
• 제34권1호
• /
• pp.143-150
• /
• 1996

The purpose of this study was to evaluate the tensile strength of solder joint between gold alloy and nickel-chromium alloy. The specimens were made with type III gold alloys and Ni-Cr-Be alloy and Degular Lot 2 solder. Eighteen paired specimens were made, and subdivided into three groups. Group I specimens were gold alloy-gold alloy combination, Group II specimens were gold alloy-Ni-Cr alloy combination, Group III specimens were Ni-Cr alloy-Ni-Cr alloy combination. Solder block were made with solder investment(Degussa A,G, Germany) and stored in room temperature for 24 hours. To reduce the formation of metallic oxide and increase wetting properties, flux was used before preheating and soldering procedure. The specimens were preheated at $650^{\circ}C$ and flux were applied again and gas-oxygen torch was used to solder the specimen. All soldered specimens were subjected to a tensile force in the Instron universal testing machine : the crosshead speed was 1 mm/mim. Tensile strength values of three soldered joint groups were 1. Gold alloy-Gold alloy solder joint : $$48.8kg/mm^2$$ 2. Gold alloy-Ni-Cr alloy solder joint : $$30.9kg/mm^2$$ 3. Ni-Cr alloy-Ni-Cr alloy solder joint : $$31.8kg/mm^2$$ The microscopic examination of fracture site showed cohesive and combination fracture modes in gold alloy specimens, but showed all adhesive fracture modes in Ni-Cr alloy containing specimens.

• 한국해양공학회지
• /
• 제31권6호
• /
• pp.413-418
• /
• 2017

In the present study, silica-aerogel-polyurethane foams were synthesized to improve the mechanical characteristics and insulation performance of the polyurethane foam applied to a liquefied natural gas carrier at a cryogenic temperature of $-163^{\circ}C$. A silica-aerogel-polyurethane foam bulk was prepared using a homogenizer by varying the weight ratio of the silica aerogel (0, 1, 3, and 5 wt%), while maintaining the contents of the polyol, isocyanate, and blowing agent constant. Compression tests were performed at room and cryogenic temperatures to compare the mechanical properties of the silica-aerogel polyurethane foams. The internal temperature of the universal testing machine was maintained through the cryogenic chamber. The thermal conductivity of the silica-aerogel-polyurethane foam was measured using a heat flow meter to confirm the insulation performance. In addition, the effect of the silica aerogels on the cells of the polyurethane foam was investigated using FE-SEM and FTIR. From the experimental results, the 1 wt% silica aerogel polyurethane foam showed outstanding mechanical and thermal performances.

• Composites Research
• /
• 제18권6호
• /
• pp.1-8
• /
• 2005

섬유강화 복합재료는 우수한 기계적, 전자기적 물성 등으로 다양한 분야에서 응용되고 있다. 열경화성 복합재는 제작공정에서의 성형온도와 제품의 운용온도인 상온간의 온도차이로 형상의 변형(스프링 백)이 발생하게 된다. 이러한 스프링 백은 하이브리드 구조의 정밀한 형상 제작을 위해서 반드시 보정되어야할 부분이다. 본 연구에서는 유리섬유/에폭시 복합재와 카본섬유/에폭시 복합재로 구성된 비대칭 하이브리드 복합재를 경화사이클, 적층두께, 적층방법 등 다양한 조건을 적용하여 제작하고 3차원 좌표측정기를 이용하여 스프링 백을 측정하였다. 또한 고전 적층판 이론(CLT)과 유한요소해석(ANSYS)으로 스프링백을 예측하고 실험결과와 비교하였다. 고전 적층판 이론과 유한요소해석으로 예측된 스프링 백은 실험 결과와 잘 일치하였으며, 성형온도가 낮을수록 스프링 백이 감소되는 경향을 보임을 확인하였으나 근원적으로 스프링 백이 제거되지는 않았다.

• 제어로봇시스템학회논문지
• /
• 제11권12호
• /
• pp.1011-1019
• /
• 2005

In this paper, Ubiquitous Home Mess-Cleanup Robot(UHMR), which has a practical function of the automatic mess-cleanup, is developed. The vacuum-cleaner had made the burden of house chore lighten but the operation labour of a vacuum-cleaner had been so severe. Recently, the cleaning robot was producted to perfectly solve the cleaning labour of a house but it also was not successful because it still had a problem of mess-cleaning, which was the clean-up of big trash and the arrangement of newspapers, clothes, etc. The cleaning robot is to just vacuum dust and small trash but has no function to arrange and take away before the automatic vacuum-cleaning. For this reason, the market for the cleaning robot is not yet built up. So, we need a design method and technological algorithm of new automatic machine to solve the problem of mess-cleanup in house. It needs functions of agile automatic navigation, novel manipulation system for mess-cleanup. The automatic navigation system has to be controlled for the full scanning of living room, to recognize the absolute position and orientation of tile self, the precise tracking of the desired path, and to distinguish the mess object to clean-up from obstacle object to just avoid. The manipulate,, which is not needed in the vacuum-cleaning robot, must have the functions, how to distinguish big trash to clean from mess objects to arrange, how to grasp in according to the form of mess objects, how to move to the destination in according to mess objects and arrange them. We use the RFID system to solve the problems in this paper and propose the reading algorithm of RFID tags installed in indoor objects and environments. Then, it should be an intelligent system so that the mess cleaning task can be autonomously performed in a wide variety of situations and environments. It needs to also has the entertainment functions for the good communication between the human and UHMR. Finally, the good performance of the designed UHMR is confirmed through the results of the mess clean-up and arrangement.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1519-1519
• /
• 2001

The aim of this work was to test the feasibility of NIRS in analysing textural characteristics of “Pasta Filata” cheese during the shelf-life. For this purpose, 128 samples of “Pasta Filata” cheese, subdivided into two sets on the basis of the wax used to avoid mechanical damages (paraffin, biodegradable wax), were analysed by using an InfraAlyzer 500 (Bran+Luebbe). Analyses were performed at room temperature. Samples were cut into small cylinders (D=3.2 cm, height = 1 cm), in agreement with literature information. Data were processed by using Sesame Software (Bran+Luebbe). Samples were analysed, during the shelf-life, at 90 and 120 days. In parallel, textural characteristics were detected carrying out a compression method by using an Universal Testing Machine Instron model 4301 (Instron Corporation, Canton, Massachusetts). As compression probe was used a cylinder (D = 5.8 cm, height = 3.7 cm) and a speed rate of 20mm/min was applied. The load at 20 mm of compression was recorded on sample cylinders of 1.7 cm (D) by 2 cm (height). Qualitative analysis of full spectra showed the possibility to gather samples on the basis of the days of shelf-life. The textural characteristics of cheese during the shelf-life was evaluated by comparing NIRS data with rheological results. The best correlation was obtained applying MLR to the first derivative of normalized absorbance values at seven wavelengths. Load values were plotted against the NIR prediction values based on first derivatives. NIRS proved to be an useful tool in classifying samples on the basis of the shelf-life period as well as in predicting their textural characteristics ($R^2$= 0.916, SEC = 0.192, SEP = 0.248, SEV = 0.345).

• 한국산학기술학회논문지
• /
• 제12권8호
• /
• pp.3610-3616
• /
• 2011

전기철도는 전차선을 통해 차량을 구동할 수 있는 전력을 공급하며, 공급된 전류는 선로 및 접지망을 통해 변전소로 귀환한다. 전기철도 구간에서 철도차량의 운행에 따라 사용된 부하전류는 귀환회로인 궤도를 통해 변전소로 유입한다. 철도차량에서 사용되고 있는 전력변환장치 때문에 부하전류에는 고조파가 함유되고 이러한 고조파 전류가 열차제어시스템에 영향을 주지 않아야 한다. 본 논문에서는 신규로 건설된 전기철도 구간에서 철도차량 운행에 따라 발생되는 고조파가 연동장치에 영향을 주는 지 확인하기 위하여 시험한 결과를 제시하고 있다. 신호기계실에 설치되는 연동장치에 철도차량 운행에 따라 고조파 영향이 있는 지 확인하기 위하여 본 논문에서의 시험은 철도차량이 운행되는 선로변 설비에서 연동장치로 연결되는 부분에서 수행되었다.

• Journal of Trauma and Injury
• /
• 제24권1호
• /
• pp.48-51
• /
• 2011

Powered by compressed air, a nail gun is an essential alternative tool to a hammer on any construction site. This useful machine launches nails at high speed, automatically embedding them in a piece of wood in only a fraction of a second. In spite of its convenience, life-threatening and fatal nail gun injuries can occur when a nail gun is misused, such as in a suicide attempt, or when the operator has insufficient training because combustion nail guns are capable of firing projectiles at velocities higher than 150 m per second. Although injuries by nail guns are rarely reported, there have been reports of nail gun injuries to the head and the trachea in Korea. In the emergency room, the authors experienced a patient injured by an accidental shooting of a nail gun while working in construction. In that accident, a nail penetrated the patient's cervical vertebra through the left cheek. This report is aimed at studying medical treatment for patients with penetrating injuries caused by nail guns.

• 한국응용과학기술학회지
• /
• 제36권4호
• /
• pp.1410-1419
• /
• 2019

본 연구는 한냉지에서 실외기에 서리가 형성되지 않는 난방이 가능한 히트펌프를 개발하고자 한다. 그래서 실내에서 -25℃의 환경을 제공할 수 있는 항온기 및 실험챔버를 구성하였다. 실험장치 내에 설치된 히트펌프의 실외기 전면에 도달하는 공기의 특성을 파악할 필요가 있어 범용소프트웨어인 ANSYS CFX를 이용하여 유동해석을 하였다. 그 결과 시뮬레이션 조건(5.0~7.0 m/s)의 모든 영역에서 실외기 전방에 도달하는 공기의 유속이 자연상태와 다르게 분포함을 파악하였다. 따라서 실외기 전면에 일정한 공기 유속이 도달할 수 있도록 별도의 공기분배기를 추가 설치할 필요가 있다고 판단된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.660-662
• /
• 2018

현대사회에서 나날이 늘어가고 있는 반려견 시장의 증가와 더불어 반려견을 키우는 사람들이 우리들의 삶에 깊숙이 자리 잡고 사회에 영향을 끼치고 있다. 이 추세를 따라 최근에 다양한 제품들이 나오고 있는데 아직 배변패드 자동세척 시스템이라는 기능적 측면으로 아직 많이 발달되어 있지 않은 것으로 생각된다. 일상생활에서 현대인들의 바쁜 사회생활로 인하여 시간, 비용, 환경적 측면으로 반려견들을 관리할 수 있는 여유가 없어서 문제로 발생되고 있다. 이러한 문제들을 방지하고자 아듀 이노와 적외선센서 모듈, 자동펌프 시스템을 개발하려고 한다. 그리고 이를 배변패드 자동세척기를 통해 사용자들에게 더욱 편의를 줄 수 있도록 설계하였다.

• KIEAE Journal
• /
• 제15권2호
• /
• pp.27-35
• /
• 2015

Purpose: Healthcare is on the whole a personal and critical service that consumer's use, whereas hospitalization is as a rule painful, because nature nurtures and Sun Light Luminosity for healthcare settings is considered healing. The performance and design of climate responsive buildings such as AKU requires a detailed study of attributes of climate both at micro as well as macro level. The therapeutic value of contact with nature through window view, greenery and landscape is calculated there. Method: A two prong strategy is been devised for this article, at micro level three typical morphologies are analysed by creating same environment of neighboring building on sun shading chart, radiation and temperature range. Since the analysis of local climate helps to determine the design strategies for hospital Healing Environment which is suitable for Karachi climate; in order to track the macro climatic behaviour, a considerable analysis of psychometrics chart for AKU Karachi are designed on Climate Consultant (CC) and analysed by Machine Learning. Climate Consultant proposes different design strategies suitable for Karachi. And on the other hand time wise illumination sources for clinical area which are then measured on psychrometric chart- according to singular space: multi patient admission, secondly: acute ambulatory ward, and tertiary: multi windowed space according to the mushrabiyah and sky light pattern. Result: Our findings support the hypothesis that windowed wall is 75-80% more healing wall; an accelerated evidence was found for healing at macro level if the form of the hospital is designed according to the climatologically preferences, whereas at micro level: the light resource becomes the staff attentiveness determinant. In Conclusion evidence was provided that the actual form of luminosity results consequently in satisfaction while light entering from several set of windows and other sources might be valued if design according to the healing environment. The data added on the sun shading chart to calculate rays entraining into space in patient room equal to 124416.21 Watts/ meter $m^2$ is calculated as precise healing rate-and is confirmed by questionnaire from patients belonging from each clinical stage having different illnesses.