• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1199-1209
• /
• 2021

The detection of unexpected loose parts in the primary coolant system in a nuclear power plant remains an extremely important issue. It is essential to develop a methodology for the localization and mass estimation of loose parts owing to the high prediction error of conventional methods. An effective approach is presented for the localization and mass estimation of a loose part using machine-learning and deep-learning algorithms. First, a methodology was developed to estimate both the impact location and the mass of a loose part at the same times in a real structure in which geometric changes exist. Second, an impact database was constructed through a series of impact finite-element analyses (FEAs). Then, impact parameter prediction modes were generated for localization and mass estimation of a simulated metallic loose part using machine-learning algorithms (artificial neural network, Gaussian process, and support vector machine) and a deep-learning algorithm (convolutional neural network). The usefulness of the methodology was validated through blind tests, and the noise effect of the training data was also investigated. The high performance obtained in this study shows that the proposed methodology using an FEA-based database and deep learning is useful for localization and mass estimation of loose parts on site.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.8
• /
• pp.693-698
• /
• 2015

Recently, the quality of products after the corresponding machining processes were scrutinized in the interest of maintaining a high product-quality standard. The structure and stability of machine tools are important for the prediction of product quality. A structural analysis needs to be carried out to achieve the stable design of machine tools before the initial design stage in the manufacturing process of a precision product. In this study, a structural analysis was carried out using a finite element analysis (FEA) simulation to obtain the design stability of the main parts of a grinding machine. The sizes and locations of both the maximum stress and deformation in consideration of the cutting force of the chuck, tail stock, and bearing of the grinding machine were analyzed. Finally the grinding machine was successfully developed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.5
• /
• pp.313-320
• /
• 2016

The need for high-strength, multi-axis, and multi-functional machine tools has recently increased because of part complexity and workpiece strength. However, most of the machine tool manufacturers rely on experience for a detailed design because of the shortcomings in the existing design technology. This study uses a topology optimization method to more effectively design a large multi-functional machine tool considering static stiffness. The ram, saddle, and column parts are important structures in a machine tool. Hence, they are selected for the finite element method analysis. Based on this analysis, the optimized internal rib structure for those parts is designed for desirable rigidity and weight. This structure could possibly provide the required design technology for machine tool manufacturers.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.4
• /
• pp.72-78
• /
• 2006

Inherent in machine tool structures are the vibrations which are generated by rotating parts such as motors, spindles and chucks. The vibrations not only hurt the precision machining but also damage the structures, and become more serious with time. Many of the old machine tools show severe vibrations for the desired accuracy of the modern industries. It is too much of a waste, however, to get rid of them as scraps. There have been many researches in order to suppress the vibrations of old machine tool structures using the tool post which utilizes actuators to compensate the existing vibrations and using the dampers or absorbers attached to some critical parts. In this paper, the dynamic properties are analyzed to obtain the natural frequencies and mode shapes of a machine tool structure which reflect the main reasons of the biggest vibrations under the given operating conditions. And the feasibility of improving the stability of the structure has been investigated with minor design changes and expenses. The result of the study shows that simple changes based on proper system identification can considerably improve the stability of the machine tool structure.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.38-42
• /
• 2002

In the recent, electro-rheological fluid has been used for micro polishing of the 3-dimensional micro-aspherical lens and some sectional parts with defects on the wide flat wafer. The ER fluid has the properties that its viscosity has drastic changed under some electric fields. Therefore, ER fluid can be applicable to the micro polishing fur some parts using these properties. In this paper, the experimental device has been constructed using the precision milling machine in order to micro polishing far some sectional parts of a 4 inches wafer It is consisted of a small steel electrode, a wafer fixture, DC10mA and 5KV power supply unit, and a controller unit. Using the ER experimental device, possibility of amending for wide flat wafer and micro polishing of some micro part has been analyzed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.363-366
• /
• 2001

Many joint parts by welding are found in the compression vessels, ship structures, pipings, heat exchangers, etc. Before their welding, steel plate cutting in a required form is very important. But because of the present CAD system's capability, unless otherwise expensive general CAD system is equipped, the efficiency or the accuracy of the cutting work can not be achieved easily. In order to get over this sort of problems, application-specific software that is limited on for the development view of the joint parts in those sort of facilities mentioned before was developed in this study.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.465-467
• /
• 2004

This paper deals with the design and analysis of automatic virus infection machine, which can be used in blood testing at veterinary hospital. It consists of the mechanical positioning parts and electrical control parts. Two of driving motor and ball screws are used to move the liquid container into the test position and mix the blood on litmus paper. In addition, a thermal controller is installed to keep the container temperature on constant level. The user interface using with a LCD and some keys are supplied with a 8-bit single chip controller. All of the designs issue related with the mechanism and controllers are discussed in detail. Finally the proposed machine is tested in real experiment with the formal processing to judge the virus infection, and also the usefulness of designed algorithm is verified through the experiments.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.3
• /
• pp.66-74
• /
• 1990

This paper presents a knowledge-based computer aided process planning system that automatically selects machine tools, machining operations and cutting tools and determines sequences of the machining operations for prismatic parts in die manufacturing. In the proposed system, parts are described by manufacturing features and grouped into part families based on the functions. Each part is repressented by a part frame which consists of basic data and manufacturing features. Knowledge for manufacturing is acquired from the domain expert and represented by frames. A decision model for selection of machine tools, machining operations and cutting tools and for determining sequences of the machining operations are developed by employing the Mealy machine in finite automata with output. The decision procedure and the order of priority which inputs manufacturing features into the Mealy machine are represented by rule for each part family. Backward chaining is used for the proposed system. The proposed system is implemented by using TURBO-PROLOG on the IBM PC/AT. A case study for the slide core is presented to show the function of the proposed system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.3
• /
• pp.281-288
• /
• 2001

We consider in this article a multi-objective part-machine grouping problem in which parts have alternative process plans and expected annual demand of each part is known. This problem is characterized as optimally determining part sets and corresponding machine cells such that total sum of distance (or dissimilarity) between parts and total sum of load differences between machines are simultaneously minimized. Two heuristic algorithms are proposed, and examples are given to compare the performance of the algorithms.

• IE interfaces
• /
• v.10 no.3
• /
• pp.189-196
• /
• 1997

This paper presents a cell formation approach for a cellular manufacturing system to minimize the inter-cell moves considering operation sequences. Two new factors are introduced: (1)flow-similarity(FS) for integrating direct/indirect inter-machine flow and similarity (2)machine cell-part moves (CPM) for exactly computing inter-cell moves. FS is used for combining machines and CPM is used for assigning the parts to the preliminary machine cells. In addition, we develop an aggregated heuristic algorithm to form manufacturing machine cells and assign the parts to those cells based on these concepts. We use performance criterion called total inter-cell moves(TICM), which is the total material flow between internal cells and external cells. Results of computational tests on a number of randomly generated test problems show that the suggested heuristic is superior to existing methods.