References
- Shin, J. H., Kwak, B. M., 1998, Structural Analysis and Optimal Design for Horizontal Machining Center, Proceeding of the KSME Annual Autumn Conference 1998, 396-401.
- Huang, D. T. Y., Lee, J. J., 2001, On obtaining machine tool stiffness by CAE techniques, International Journal of Machine Tool and Manufacture, 41 1149-1163. https://doi.org/10.1016/S0890-6955(01)00012-8
- Kono, D., Nishio, S., Yamaji, I., Matsubara, A., 2015, A method for stiffness turning of machine tool supports considering contact stiffness, International Journal of Machine Tool and Manufacture, 90 50-59. https://doi.org/10.1016/j.ijmachtools.2015.01.001
- Choi Y. H., Jang, S. H., Kim, I. S., Cho, Y. S., Oh, C. W., 2006, Structural Layout Design Altermative of a 5-Axes Multi-tasking Machine Considering Loop Stiffness, Proceeding of the KSMTE Annual Spring Conference 2006, 226-231.
- Kim, Y. J., Lee, C. H., 2010, Static Stiffness Turning Method of Rotational Joint of Machining Center, Journal of the Korean Society of Manufacturing Process Engineers, 19 797-803.
- Wu, B. C., Young, G. S., Huang, T. Y., 2000, Application of a two-level optimization process to conceptual structural design of a machine tool, International Journal of Machine Tool and Manufacture, 40 783-794. https://doi.org/10.1016/S0890-6955(99)00113-3
- Zhao, L., Ma, J., Wang, T., Xing, D., 2010, Lightweight Design of Mechanical Structures based on Structural Bionic Methodology, Journal of Bionic Engineering, 7 224-231. https://doi.org/10.1016/S1672-6529(09)60239-0
- Zhao, L., Ma, J., Chen, W., Guo, H., 2011, Lightweight Design and Verification of Gantry Machining Center Crossbeam Based on Structural Bionics, Journal of Bionic Engineering, 8 201-206. https://doi.org/10.1016/S1672-6529(11)60021-8
- Li, B., Hong, J., Wang, Z., Wu, W., Chen, Y., 2012, Optimal Design of Machine Tool Bed by Load Bearing Topology Identification with Weight Distribution Criterion, Procedia CIRP, 3 626-631.
- Li, B., Hong, J., Liu, Z., 2014, Stiffness design of machine tool structures by a biologically inspired topology optimization method, International Journal of Machine Tool and Manufacture, 84 33-44. https://doi.org/10.1016/j.ijmachtools.2014.03.005
Cited by
- 3D적층/절삭 하이브리드가공기의 구조최적화에 관한 연구 vol.20, pp.2, 2016, https://doi.org/10.14775/ksmpe.2021.20.02.045
- 금속 적층 기반 하이브리드 머시닝센터의 경량화를 위한 형상 최적화에 관한 연구 vol.20, pp.2, 2016, https://doi.org/10.14775/ksmpe.2021.20.02.080