• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.664-666
• /
• 2000

기존에는 웹 환경에서 정보를 전달하기 위해 고정된 미디어들 위주로 표현하였지만, 최근 웹이 상업화, 대중화, 멀티미디어화 됨에 따라 정보를 효과적으로 전달하기 위해서는 정보를 미디어들이 결합된 연속적인 멀티미디어로 표현되어야 한다. 이러한 미디어들간의 통합 작업에서 요구되는 것이 미디어들 간의 동기화이다. 본 논문에서는 웹 환경에서 연속적인 멀티미디어를 작성하고, 재생할 수 있는 웹 기반의 멀티미디어 시스템(Multimedia System on the Web:MSW)을 설계하고, 멀티미디어의 모델링과 미디어들 간의 동기화를 위하여 MPNW(Multimedia Petri Net on the Web)을 제안한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.158.1-158.1
• /
• 2010

국내 최초의 생활폐기물고형연료(RDF) 생산플랜트인 원주시 RDF플랜트의 2009년도 운영실적을 정리하여 폐기물 처리단가를 분석하였으며 에너지 생산 효과도 분석하였다. 실적분석에 사용된 자료는 원주 RDF플랜트 위탁운영업체가 운영비를 청구 및 정산하기 위해서 원주시에 상시 측정 및 보고하는 항목으로서, 내용은 트럭으로 플랜트에 반입되는 폐기물 전체량, RDF생산 전체량, 불순물 매립 전체량, 건조 및 탈취용 연료사용 전체량, 전기사용 전체량 등이다. 2009년도 원주시 RDF플랜트에 반입된 폐기물 량은 총 17,504톤이었고, RDF를 총 7,044톤 생산하였으며, 4,120톤의 불연물을 선별하였다. 1년간 사용한 건조 및 탈취용 연료는 총 596,268 리터였으며 연료인 부생유의 가격은 리터 당 평균 864.6원이었다. 사용한 전기량은 총 2,435,397 kWh였고, 이 중에서 성형공정에 사용된 전기량은 총 사용량의 19%였다. 이상의 기록자료들을 분석해 본 결과, 폐기물 1톤을 처리하는데 전기 비용이 14,334원이었고, 연료비가 29,452원이었다. 여기에 폐기물 1톤당 불연물 매립비 6,573원과 위탁인건비를 합하면 폐기물 1톤당 처리비용은 약 116,573원으로 나타났다. 현재 원주시 RDF는 톤당 25,000원에 판매되고 있으므로 이 비용을 감안하면 폐기물 1톤당 처리비용은 105,298원으로 산출되었다. 현재 알려진 유사 규모의 소각로 운영비가 폐기물 1톤당 136,736원인데, 이것은 RDF기술보다 31,438원/톤-폐기물 정도 처리비용이 비싸다. 따라서 100톤 이하 규모의 폐기물처리시설 설치를 할 경우에는 RDF 시설이 경제적으로 타당함을 나타낸다. 원주시 RDF플랜트의 물질수지를 분석해 본 결과, RDF생산 수율은 40.2%였으며 총 투입된 에너지는 8,0587 Gcal였다. 생산된 에너지 총량은 RDF발열량 4,500 kcal/kg으로 했을 때 31,699 Gcal로 나타났다. 투입대비 생산에너지 비율은 25.4%로 계산되었고, 전기의 발전효율을 40%로 감안했을 경우에는 35.3%로 계산되었다. 성형하는데 사용되는 총 에너지는 전체 투입에너지의 4.9%로 나타났고, 비용으로는 폐기물 1톤당 2,723원 이었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.2
• /
• pp.76-88
• /
• 2012

In this study, the treatment flow of the recyclables(paper, plastic, metal, etc.) collected and separated from MSW was investigated throughout entire phase from separation and collection to final disposal. Based on the site survey, most recyclables came into six material recovery facilities were comparatively managed well. However, some of recyclables showed irrelatively transportation flow. Because the main income source of the recyclables transportation companies is profit margin between treatment and transportation cost based on economics only therefore, it occurs an unnecessary route and long distance transportation while going to final destination. This unreasonable system should be a serious problem relating establishment of the resource recycling system. As a result of this study, in order to establish the reasonably resource recycling system, recycling center including material recovery facility has to manage the recyclables generated in close range preferentially. Also integrated its treatment system over a wide area will need to be considered as a basic step for the reasonable reasonably resource recycling system.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.960-966
• /
• 2013

In this study, operation data from an actual plant in M city were analyzed to evaluate effects of water supply into sewage sludge on the co-incineration of municipal solid waste (MSW) and sewage sludge. Design capacity of the stoker incinerator is 50 m3/day. Maximum portion of sewage sludge in the total waste input was 20%. According to this research, moisture content increase up to 85% of sewage sludge could be possible by water supply on MSW input to the incinerator. Therefore, stable operation of incinerator could be achieved. As water was added into sewage sludge up to 85%, input quantity of sewage sludge to frequency (Hz) was similar to theoretical input. Also, it is concluded that stable management of incinerator without leachate combustion and damages of refractory bricks and castable could be achieved by the reduction of low heating value.

• Korean Chemical Engineering Research
• /
• v.40 no.6
• /
• pp.757-762
• /
• 2002

The interest of incineration, which is one of the effective methods for municipal waste disposal, has gradually increased because the incineration could reduce the volume and weight of the waste, and produce useful energy from the waste. This study has developed the 3-dimensional numerical model, and applied for the investigation of combustion characteristics and optimized operating conditions in MSW incinerator in Gwangju. The model developed in this study has been verified through the comparison between the predicted and the measured temperature in combustion chamber which is operating. By predictive results, the Sangmoo incinerator has a good characteristics of combustion efficiency and a low emission by the second burning in the main flame zone, even though after burning zone produces incomplete products by which primary air is introduced not enough.

• Solar Energy
• /
• v.18 no.3
• /
• pp.197-203
• /
• 1998

A 5 ton/day pilot scale two-phase anaerobic digester was constructed and tasted to treat Korean food wastes in Anyang city. The process was developed based on 3 years of lab-scale experimental results on am optimim treatment method for the recovery of biogas and humus. Problems related to food waste are ever Increasing quantity among municipal solid wastes(MSW) and high moisture and salt contents. Thus our food waste produces large amounts of leachate and bed odor in landfill sites which are being exhausted. The easily degradable presorted food waste was efficiently treated in the two-phase anaerobic digestion process. The waste contained in plastic bags was shredded and then screened for the removal of inert material such as fabrics and plastics, and subsequently put into the two-stage reactors. Heavy and light inerts such as bones, shells, spoons and plastic pieces were again removed by gravity differences. The residual organic component was effectively hydrolyzed and acidified in the first reactor with 5 days space time at pH of about 6.5. The second, methanization reactor part of which is filled with anaerobic fillters, converted the acids into methane with pH between 7.4 to 7.8. The space time for the second reactor was 15 days. The effluent from the second reactor was recycled to the first reactor to provide alkalinities. The process showed stable steady state operation with the maximum organic rate of 7.9 $kgVS/m^3day$ and the volatile solid reduction efficiency of about 70%. The total of 3.6 tons presorted MSW containing 2.9 tons of food organic was treated to produce about $230m^3$ of biogas with 70% of methane and 80kg humus. This process is extended to full scale treating 15 tons of food waste a day in Euiwang city and the produced biogas is utilized for the heating/cooling of adjacent buildings.

• Environmental Analysis Health and Toxicology
• /
• v.11 no.1_2
• /
• pp.31-39
• /
• 1996

Leachate from municipal solid waste (MSW) landfill, effluent from leachate treatment plant, and ground water sample from a monitoring well near landfill site were tested for an acute toxicity. Microtox toxicity test was used for testing the acute toxicity of leachate and other samples. EC$_{50}$ values which a concentration of pollutant for reducing 50% light output from luminescent bacteria, Photobacterium phosphoreum were determined to assess the toxicity of pollutants as well as the relative toxicity. In addition, characteristics of leachate were studied and compared to those of phenol and pentachlorophenol (PCP) which are typical aquatic toxic pollutants. For leachate, EC$_{50}$ for 30 min incubation was 10.8%, while for phenol and PCP, 46 ppm and 1.2 ppm, respectively. the relative toxicity of treated leachate by in situ aeration with activated sludge was reduced to more than 75% of toxicity of the untreated leachate. Microtox toxicity test was failed to figure out EC$_{50}$ values for groundwater from a monitoring well since the relative toxicity of the unconcentrated sample was too low to estimate EC$_{50}$. Addition of activated carbon to leachate was reduced the relative toxicity. The reduction Pattern of the relative toxicity of leachate by mechanical aeration was similar to that of PCP, but different from that of phenol. These findings suggest that the toxicity of leachate may come from PCP-like toxic compounds rather than phenol-like one. In conclusion, the process of aeration with activated sludge might be very important to reduce the environmental toxicity of leachate. And Microtox test could be a reasonable bioassay for screening and monitoring the environmental toxicity of leachate from municipal solid waste landfill as well as for determining the reduction efficiency of the leachate toxicity by various treatment processes in leachate treatment plant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.538-538
• /
• 2008

금속계열의 박막을 평탄화하기위해서는 슬러리에 함유된 산화제에 의해 부동태층의 형성이 선행되어야 한다. 따라서 본 논문에서는 Copper 박막의 표면을 부동태층으로 형성시키고 CMP공정을 하기위해 산화제에 dipping을 시켰으며 삼화제의 종류는 $H_2O_2$, MSW2000B, $KIO_3$로 하고 dipping 시간은 30초, 60초, 90초, 3분, 10분으로 하여 시간과 산화제 종류에 따른 부동태층의 변화를 연구하였다. 부동태층의 관찰은 FESEM을 이용하여 표면과 단면을 관찰하였고 부동태층의 조성비율은 EDX를 이용하여 조사하였다. MSW 2000B의 경우는 부동태층이 덩어리 모양으로 형성되었으며 포화현상은 3분에 일어났다. 반면에 $H_2O_2$의 경우는 부동태층이 침상 모양으로 형성되었으며 포화현상은 90초에 일어났다. 산화제에 의해 부동태층을 형성시킨 후 POLI-450을 이용하여 평탄화공정을 진행하였으며 CMP공정조건은 부동태층의 연질상태임을 감안하여 헤드 스피드 20rpm, 플레이튼 스피드 10rpm, 슬러리 주입속도 90ml/min, 공정온도는 상온으로 하여 진행하였다. $H_2O_2$를 산화제로 사용하여 dipping을 하고 CMP를 하였을 경우에 균일한 박막을 확보 할 수 있었으며 CMP 공정 후 copper 박막의 균일성은 FESEM을 이용하여 관찰 하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.9
• /
• pp.583-589
• /
• 2012

The various promotion countermeasures such as solidification, carbonization, and the creation of cement materials have been considered to existing treatment methods such as incineration and the creation of composts, since direct landfill was prohibited for encouraging the recycling based on the sludge treatment on land. The Main objective of this study is to investigate the feasibility of co-incineration for MSW (Municipal Solid Waste) and SS (Sewage Sludge) through the change of heat and atmospheric pollutants. In this study, LHV (Low Heating Value) is 100~300 kcal/kg because the MC (Moisture Content) of de-hydrated sewage sludge is approximately 80%. From the results, we knew the feasibility of co-incineration for MSW (80%) and SS (20%). As the co-incineration rate of SS up to 20% became higher, the loading of heat and atmospheric pollutants was not influenced.

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.793-802
• /
• 2019

The centrifuge model test is usually used for two-dimensional deformation and instability study of the soil slopes. As a typical loose slope, the municipal solid waste (MSW) landfill is easy to slide with large deformation, under high water levels or large earthquakes. A series of centrifuge model tests of landfill slide induced by rising water level and earthquake were carried out. The particle image velocimetry (PIV), laser displacement transducer (LDT) and marker tracer (MT) methods were used to measure the deformation of the landfill under different centrifugal accelerations, water levels and earthquake magnitudes. The PIV method realized the observation of continuous deformation of the landfill model, and its results were consistent with those by LDT, which had higher precision than the MT method. The deformation of the landfill was mainly vertically downward and increased linearly with the rising centrifugal acceleration. When the water level rose, the horizontal deformation of the landfill developed gradually due to the seepage, and a global slide surface formed when the critical water level was reached. The seismic deformation of the landfill was mainly vertical at a low water level, but significant horizontal deformation occurred under a high water level. The results of the tests and analyses verified the applicability of PIV in the two-dimensional deformation measurement in the centrifuge model tests of the MSW landfill, and provide an important basis for revealing the instability mechanism of landfills under extreme hydraulic and seismic conditions.