• Journal of Korean Society of societal Security
• /
• v.3 no.2
• /
• pp.27-32
• /
• 2010

Emergency preparedness plan (EPP) is the systematic management of activities that involve a material degree of risk of loss or other damage to the surroundings (people, property and environment), and the boundary of accident recovery plan (ARP). The main purpose of the program is to provide a safety management system to each facility in order to enable to prevent accident and to control accident immediately. The EPP includes not only typical safety-related documentations such as material safety data sheet (MSDS), standard operation procedure (SOP), emergency response plan(ERP). EPP is established basis of the preliminary safety analysis involving risk identification, assessment and prevention plans. The program is also helpful for government or related agencies to control a number of accidents in small-scale companies in the whole country.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.16 no.2
• /
• pp.81-90
• /
• 2006

The Strain Index(SI) has been commonly used to evaluate the musculoskeletal disorders(MSDs) of upper extremities. Recently, the American Conference of Governmental Industrial Hygienists(ACGIH) adopted the Threshold Limit Value for hand activity level (HAL TLV) focused on the hand, wrist, and forearm. The MSDs risks of 37 repetitive works conducted at an automobile climate control system manufacturing factory were evaluated using both the HAL TLV and the SI, and the results by two methods were compared. Also, measured repetitive frequencies of upper limbs joint were mesured using electromyogram and electrogoniometer. The evaluation results of the HAL were related with the repetitive frequency data of upper limbs joint by electrogoniometer, and the NPF was related with %MVC of ECU. The evaluation result of HAL TLV was highly related with the SI score(r=0.66, p<0.01). Of total 37 tasks, 25 tasks(67.6%) were exceeded the TLV and 34 tasks(91.9%) exceeded the SI limit. Although there was a high relationship between the HAL TLV and SI score, the HAL TLV underestimated the risk in comparison with the SI. The correlation coefficients(r) between the HAL TLV data and the repetitive frequency of upper limbs joint were 0.45~0.55(p<0.01). The MSD symptoms was significantly different between high risk groups and low risk groups evaluated by HAL TLV(p<0.01), but was not different between two groups by SI. In conclusion, the HAL TLV is a proper tool for repetitive works.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.8-13
• /
• 2024

Objectives: To evaluate the levels of exposure to organic compounds during aircraft disinfection and seat cover replacement operations. Methods: According to the working schedule, organic compounds were collected using activated carbon tubes and then analyzed by GC/FID and GC/MSD. Results: In the disinfection task, the main substances listed in the material safety data sheet (MSDS) of the disinfectant were not detected. However, 1-bromopropane, which had been used in the previous task of replacing seat covers, was detected at a level of 2.37 ppm at the measurement time. During seat cover replacement, bonding workers were exposed to 2.48 ppm on an eight-hour time-weighted average, and seat cover replacement workers were exposed to 0.22 ppm. Conclusions: It is necessary to ensure the reliability of MSDS. A work environment management system is necessary when different companies alternate working in the same place.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.618-626
• /
• 2011

The characteristics of construction work cause excessive strain on specific body parts of the construction craft workers. However, there are few tools to mane an accurate measurement of the load on the musculoskeletal system, and the musculoskeletal disorders (MSDs) experienced by the workers have not been properly understood. So, there is an urgent need for development of a tool to measure the load on the musculoskeletal system. Therefore, this research aims to develop a musculoskeletal load measuring device for construction workers. In order to eliminate the noise and errors, an accelerometer, gyro sensors and the Kalman Filter are used in the device developed in this research.

• Journal of Environmental Impact Assessment
• /
• v.5 no.1
• /
• pp.107-121
• /
• 1996

The objective of this study is to establish the application method of environmental information system which is related to hazard identification for Health Risk Assessment. For establishing the environmental information system, fourteen hazardous chemicals were chosen and applicated to the database network such as RTKNET(Right Know Net), MSDS(Material Safety Data Sheets), TRI(Toxic Release Inventory), IRIS, AIRS, etc. The searching method of environmental information is classified to three sections such as the domestic commercial information company, international database agencies, and internet. Recently the importance of environmental information is being emphasized because it is essential 10 use database system in the field of environmental studies. Most of the foreign research organizations are communicating actively for information exchange, and the improvement of the quality of research. It is required to accumulate the data and develop them to database for future research.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.2
• /
• pp.117-122
• /
• 2022

This paper proposes a method for evaluating the work of manufacturing workers using MediaPipe as a risk factor for musculoskeletal diseases. Recently, musculoskeletal disorders (MSDs) caused by repeated working attitudes in industrial sites have emerged as one of the biggest problems in the industrial health field while increasing public interest. The Korea Occupational Safety and Health Agency presents tools such as NIOSH Lifting Equations (NIOSH), OWAS (Ovako Working-posture Analysis System), Rapid Upper Limb Assessment (RULA), and Rapid Entertainment Assessment (REBA) as ways to quantitatively calculate the risk of musculoskeletal diseases that can occur due to workers' repeated working attitudes. To compensate for these shortcomings, the system proposed in this study obtains the position of the joint by estimating the posture of the worker using the posture estimation learning model of MediaPipe. The position of the joint is calculated using inverse kinetics to obtain an angle and substitute it into the REBA equation to calculate the load level of the working posture. The calculated result was compared to the expert's image-based REBA evaluation result, and if there was a result with a large error, feedback was conducted with the expert again.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.97-102
• /
• 2011

This study was performed to design and develop an ergonomic equipment for strawberry sorting and packing in agricultural working environments. Potential risk of work related musculo-skeletal disorders associated with farm workers performing strawberry sorting and packing was analyzed through interviews, field surveys, work measurement, and working posture evaluation. For the evaluation of working posture, we used REBA, OWAS, and RULA assessment methods to identify multi-factorial risk factors. Based on the result of comprehensive assessment, a new concept of multi-level rotating table for strawberry sorting and packing was proposed to modify awkward working postures and improve the effectiveness of the farm work. Finally, the characteristics and effectiveness of new equipment was discussed in terms of improvements in productivity, safety, and subjective ratings of farm workers. The results of analysis showed that working conditions improved significantly.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.13-27
• /
• 2006

The goal of this study is to propose the effective way of finding injurious factors and making improved plan that prevents the workers against musculoskeletal disorders at a semi-finished medical product fabricating company A questionnaire and an ergonomic assessment method were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an analysis of working postures and a quantitative assessment on various processes were performed to find out harmful factors of workplace. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders and making improvement plans to the company with similar working conditions and process.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.05a
• /
• pp.251-257
• /
• 2005

The purpose of this study is to execute the investigation of injurious factors causing muscle-skeletal diseases at an automotive glass manufacturing company and, on the basis of the results, to enhance productivity by the improvement of working environment. By using an survey and an ergonomic evaluation method, symptoms of muscle-skeletal diseases of workers and working postures at each process were analyzed, and quantitative evaluation of muscle-skeletal disease risk against each process was performed. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. Suggested improvement plan was applied to the workplace step by step and it is confirmed that improvement plan not only removes the injurious factors of muscle-skeletal diseases but also is effective to enhance productivity.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.73-83
• /
• 2005

The goal of this study is to propose the improved scheme that prevents the workers against musculoskeletal disorders at a fishcake manufacturing company, A questionnaire and an ergonomic assessment method were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an analysis of working postures and a quantitative assessment on various processes were performed to find out harmful factors of workplace. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. Suggested improvement plan was applied to the workplace step by step and it is confirmed that improvement plan can removes the injurious factors of musculoskeletal diseases effectively.