• 한국해양공학회지
• /
• 제29권6호
• /
• pp.463-469
• /
• 2015

Fatigue in the metal used as hull material has always been an important issue. The fatigue phenomenongenerally occurs suddenly in a ship hull, and always causesa large number of casualties and economic losses. This paper presents a study of an assessment method for the fatigue life based on Li’s approach using MSC Fatigue. The details of Li’s approach based on MSC Fatigue are provided. Based on the results of this study, it can be concluded that Li’s approach has several advantages: (1) it allows the wide application of different structural details, (2) is easy to use, and (3) provides accurate results. Finally, Li’s approach can be proven to be feasible for a ship’s fatigue analysis.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.344-351
• /
• 1999

Stress analysis of bogie frame by using the finite element method has been performed for the various loading conditions according to the UIC (International Union of Railways) Code 615-4. Multiaxial fatigue damage models such as signed von Mises method and typical critical plane theories were reviewed, and multiaxial fatigue analysis program (MUFAP) has been developed. Fatigue analysis of bogie frame under multiaxial loading was performed by using MUFAP and finite element analysis results. The procedure developed in this study is considered to be useful for the life prediction in preliminary design stage of railway components under multiaxial loading conditions. 3-dimensional surface modeling, mesh generation and finite element analysis were performed by Pro-Engineer, MSC/PATRAN and MSC/NASTRAN, respectively, which were installed in engineering workstation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.330-337
• /
• 1998

Bogie is mainly consisted of the bogie frame, suspensions, wheels and axles, braking system, and transmission system. The complex shapes of the bogie frame and the multiaxial loading condition induced in real operation make it difficult to design the bogie frame against the fatigue. In this study, multiaxial fatigue criteria were reviewed. Stress analysis of the bogie frame has been performed for the various loading conditions according to the UIC Code 615-4. Magnitudes of the stress amplitude and mean stress were estimated based on the stress analysis results to simulate the operating loads encountered in service. Fatigue strength of the bogie frame was evaluated by using the constant life diagram of the material. 3-D surface model ling, finite element meshing, and finite element analysis were performed by Pro-Engineer, MSC/PATRAN, and MSC/NASTRAN, respectively.

• 전산구조공학
• /
• 제15권1호
• /
• pp.95-103
• /
• 2002

• 연구논문집
• /
• 통권27호
• /
• pp.57-73
• /
• 1997

The bogie between the track and the railway vehicle body, is one of the most important component in railroad vehicle. Its effects on the safety of both passengers and vehicle itself, and on the overall performance of the vehicle such as riding quality, noise and vibration are critical. The bogie is mainly consisted of the bogie frame, suspensions, wheels and axles, braking system, and transmission system. The complex shapes of the bogie frame and the complicate loading condition (both static and dynamic) induced in real operation make it difficult to design the bogie frame fulfilling all the requirements. The complicated loads applied to the bogie frame are i) static load due to the weight of the vehicle and passengers, ii) quasi-static load due to the rolling in curves iii) dynamic load due to the relative motion between the track, bogie, and vehicle body. In designing the real bogie frame, fatigue analysis based on the above complicated loading conditions is a must. In this study, stress analysis of the bogie frame has been performed for the various loading conditions according to the UIC Code 6 15-4. Magnitudes of the stress amplitude and mean stress were estimated based on the stress analysis results to simulate the operating loads encountered in service. Fatigue strength of the bogie frame was evaluated by using the constant life diagram of the material. 3-D surface modelling, finite element meshing, and finite element analysis were performed by Pro-Engineer, MSC/PATRAN, and MSC/NASTRAN, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.654-659
• /
• 2007

In this paper, the fatigue load spectrum for tilt rotor UAV is developed and fatigue analysis is achieved for flaperon joint. Tilt rotor UAV has two modes which are helicopter mode when UAV is taking off and landing and fixed wing mode when UAV is cruising. To make fatigue load spectrum, FELIX for helicopter mode and TWIST for fixed wing mode are used. And Fatigue analysis of flaperon joint is achieved using fatigue load spectrum we obtained. When S-N test data are analyzed, we use the Kriging meta model to get probability S-N curve for whole range of material life. The result which is life of flaperon joint obtained by suggested fatigue analysis procedure in this paper is compared with that obtained by MSC/Fatigue.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.147-152
• /
• 2005

The exhaust system of automobile is faced with random or spectrum types of fatigue loads during usage life and so needs to be closely estimated for quality and performance to have enough certainty on design endurance lift during preliminary design process. Structural operation conditions, operation load history, property of material and manufacturing process etc. should be considered by performing experiment approach. Using the software program for predicting fatigue life quickly and exactly in preliminary design stage saves plenty of time and cost generated by fatigue tests. In this paper, fatigue life prediction was performed on the basis of fatigue analysis using MSC/FATIGUE and load data from field test and the life of development items was estimated and compared through the results.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1085-1090
• /
• 2011

철도차량의 안전성을 확보하기위해서는 견인성능 및 속도의 변동성을 고려하여 감속기의 피로해석에 관한 연구를 수행하는 것이 중요하다. 본 논문은 고속철도차량 감속기 기어의 변동하중하에서 피로파괴에 대하여 준정적 유한요소해석과 선형 Miner's Rule에 의한 내구성해석을 수행하였다. 해석을 위한 변동하중이력은 열차견인성능곡선과 상업운전조건에서 운전선도를 기초로 MSC.ADAMS의 동역학 해석에 의하여 구축하였다. 또한 감속기 피로수명은 기어표면의 침탄부 효과를 고려한 유한요소모델을 사용하여 변형률-수명접근법에 의하여 예측하였다. 해석결과로부터 급출발에 의한 빈번한 높은 기동토크와 정차역수의 증가는 철도차량 감속기 기어수명을 감소시킴을 알 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.382-386
• /
• 2009

극심한 작동환경에 노출되는 부품은 일반적으로 수명이 줄어들게 된다. 액체로켓의 터보펌프는 높은 회전속도로 인한 높은 원심력과 높은 온도와 같은 환경에서 작동한다. 이와 같은 환경에서 작동하는 터보펌프는 극심한 피로와 크리프의 영향으로 재료의 내구성이 떨어지게 된다. 75톤급 터보펌프 터빈의 내구성을 확보하기 위하여 피로와 크리프의 영향을 고려한 손상률을 계산하였다. 터보펌프 피로해석에는 ABAQUS/CAE와 MSC.Fatigue를 사용하여 해석을 수행하였으며, 크리프 해석을 수행하기 위해서 Larson-Miller parameter 곡선과 로빈슨 법칙을 사용하였다. 본 연구에서는 터보펌프의 터빈에 대한 내구성을 확보하기 위하여 피로의 영향과 크리프의 영향을 비교, 분석하였다.

• 한국항공우주학회지
• /
• 제40권7호
• /
• pp.564-573
• /
• 2012

새롭게 제안된 공력 설계 절차와 In-house 프로그램을 이용하여 1 MW급 수평축풍력 터빈 블레이드의 형상을 결정하였고, 기존에 개발된 블레이드의 실험 결과와 본 연구에서 제안한 블레이드와의 비교를 통하여 공력 설계에 대한 타당성을 제시하였다. 블레이드의 구조 설계는 Netting Rule과 Rule of Mixture를 적용하여 설계를 진행하였다. 설계된 블레이드의 구조적 안전성은 상업적 유한요소프로그램인 MSC.NASTRAN을 사용하여 다양한 하중에 따라 선형 정적해석, 변형해석, 좌굴해석, 진동모드해석 등을 수행하였다. 최종적으로 Spera가 제시한 실험식을 적용하여 요구된 피로수명에 대해 타당성을 확인하였다.